Yunfeng Liu

Dr. Yunfeng Liu


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 April 2024 in ACS Omega
Verified
Journal Article
Open access
YLYunfeng Liu
Yunfeng Liu
LZLang Zhou
Lang Zhou
XWXiaochun Wan
Xiaochun Wan
YTYongfan Tang
Yongfan Tang
QLQiang Liu
Qiang Liu
JLJianbo Liao
Jianbo Liao
Deep, high-temperature carbonate reservoirs, represented by the Chuanzhong-Gaomo Block and the Penglai Gas Field, have become important supports for increased storage and production in Sichuan Basin. However, acidization in high-temperature to ultrahigh-temperature reservoirs faces several technical challenges, such as fast acid-rock reaction rates, limited acid corrosion distances, and high risks of tubular corrosion. In this study, a novel high-temperature-resistant microencapsulated gelling agent GLE-3 was prepared using N-isopropylacrylamide (NIPAM) as the wall material, acrylamide (AM), 2-acrylamido-2-methylpropanesulfonic acid (AMPS), and N-vinylcaprolactam (NVCL) as the core materials, and N,N'-methylenebis(acrylamide) (MBA) as the cross-linking agent through inverse emulsion polymerization. GLE-3 was structurally characterized using infrared spectroscopy, transmission electron microscopy, and particle size analysis, and its properties were evaluated. The results showed that GLE-3 exhibited uniform particle size distribution ranging from 10 to 100 μm. Under high-temperature conditions of 180 °C and a shear rate of 170 s-1, the viscosity of the gel acid solution remained above 27.8 mPa·s, with a viscosity retention rate of 63.76%. Compared to GLE-1 (uncapsulated), GLE-3 demonstrated improved thermal stability and shear stability after microencapsulation. After 60 min of shearing at 180 °C and shear rate of 170 s-1, the viscosity retention rate was 88.99%. Furthermore, under 180 °C conditions, GLE-3 exhibited good high-temperature slow-release performance compared to GLE-1, which unencapsulated with the same raw materials. By increasing the viscosity of the gel acid, delaying the acid-rock reaction rate, and providing high-temperature slow-release effects, the high-temperature resistance of the acid system was enhanced, ultimately achieving deep acidization in high-temperature reservoirs.

1 January 2022 in REVIEWS ON ADVANCED MATERIALS SCIENCE
Verified
Journal Article
Open access
PDF file
YLYunfeng Liu
Yunfeng Liu
LCLili Chen
Lili Chen
YTYongfan Tang
Yongfan Tang
XZXingde Zhang
Xingde Zhang
ZQZhengsong Qiu
Zhengsong Qiu
Aiming at the current situation that the existing acidizing corrosion inhibitors are difficult to apply in high temperature, high concentration acid, and other complex conditions, this article uses nano-SiO2 as the core and preferably functional monomers to synthesize nano-SiO2@octadecylbisimidazoline quaternary ammonium salt (nano-SiO2@OBQA). Analytical methods such as nuclear magnetic resonance, infrared, and scanning electron microscopy were used for characterization. The corrosion inhibition performance of the N80 steel sheet by nano-SiO2@OBQA in 20% concentrated hydrochloric acid was studied using the high-temperature corrosion testing machine and adsorption isotherm model combined with quantum chemistry calculations to explore its mechanism of action. The results show that nano-SiO2@OBQA has good high-temperature resistance. When the temperature is 180℃ and the dosage of nano-SiO2@OBQA is 4%, the corrosion inhibition rate is 61.42 g·m−2·h−1. Studies have shown that the adsorption of nano-SiO2@OBQA on the surface of the N80 steel sheet follows the Langmuir isotherm adsorption model, which is spontaneous chemical adsorption.

11 March 2020 in RSC Advances
Verified
Journal Article
Open access
PDF file
YLYunfeng Liu
Yunfeng Liu
ZQZhengsong Qiu
Zhengsong Qiu
CZChong Zhao
Chong Zhao
ZNZhen Nie
Zhen Nie
HZHanyi Zhong
Hanyi Zhong
XXXijin Xing
Xijin Xing
This paper is concerned with the formation of bitumen during the drilling of the H oilfield in Iraq. The high viscosity and strong adhesion properties of bitumen can influence the drilling operations. Some complex problems include paste screening, and drill pipe sticking, which cause huge economic losses. Therefore, it is necessary to effectively reduce the bitumen viscosity. The contribution of a single subcomponent of bitumen to the viscosity can vary, and the combined effect of different components of bitumen on the viscosity remains unclear. Furthermore, the mechanism of viscosity reduction remains unclear. In this study, the effects of organic solvents on the viscosity of bitumen were studied, and toluene was selected as the best organic solvent. The results showed that aromatics/resins, aromatics/asphaltenes, and resin/asphaltenes can help increase the bitumen viscosity. Novel methods, including the use of nanoparticles, ethyl cellulose, and the quaternary ammonium salt of heptadecenyl hydroxyethyl imidazoline (QASHI), were proposed to decrease the viscosity. TiO2 and CuO nanoparticles were chosen, and the main factors influencing the viscosity, such as the particle type, concentration, particle size, temperature, and shear rate, were analysed. The results show that the bitumen viscosity decreases with the increase in the concentrations of ethyl cellulose and QASHI. A synergistic effect between ethyl cellulose and QASHI was found with an optimal concentrations of ethyl cellulose and QASHI (1000 and 1600 mg L−1). A synergistic effect was also observed when nanoparticles, ethyl cellulose, and QASHI were used in combination. This paper reports the micro-mechanism whereby the viscosity of bitumen is decreased.

1 January 2022 in Nanotechnology Reviews
Verified
Journal Article
Open access
PDF file
YLYunfeng Liu
Yunfeng Liu
YTYongfan Tang
Yongfan Tang
QCQiuhao Chang
Qiuhao Chang
CMChentao Ma
Chentao Ma
SHShunhua He
Shunhua He
LYLi Yuan
Li Yuan
The efficient and sustainable development of deep marine carbonate rock reservoirs in the Sichuan Basin has higher technical requirements for reservoir acidizing alteration technology. However, the acidification effect of deep marine carbonate rock reservoirs was hampered by the drawbacks such as uncontrollable acidification rate of the reservoir, the large friction resistance, and the great acid filtration. A novel heat- and shear-resistant nano-silica gelling agent CTG-1 is prepared based on nano-silica and combined with amide compounds. The influence of different factors on the acid filtration performance and heat- and shear-resistant capacity of carbonate rock reservoirs were analyzed, and then the mechanism of nano-silica gelling agent for acid filtration reduction in carbonate rock reservoirs is revealed. The research results showed that the filtration resistance of acid solution decreases slightly with the increase in the content of nano-silica gelling agent and reservoir pressure. The viscosity, fluid loss coefficient, and friction-reducing rate are as high as 25 mPa s, 2.4 × 10 −2 m 3 min 1/2 , and 71%, respectively, showing significantly better result than that of commonly used commercial gelling agents. The development of nano-silica gelling agent provides a reliable reference for effectively improving the acidification and stimulation effect of deep marine carbonate rock reservoirs.

14 December 2023 in ACS Omega
Verified
Journal Article
Open access
YLYunfeng Liu
Yunfeng Liu
LZLang Zhou
Lang Zhou
YTYongfan Tang
Yongfan Tang
QLQiang Liu
Qiang Liu
WLWei Li
Wei Li
YZYan Zhang
Yan Zhang
Deep carbonate rock oil and gas reservoir is an important support for increasing oil and gas storage and production at present. The environment of ultradeep and ultrahigh-temperature reservoirs has put forward higher technical requirements for reservoir modification acid technology. Moreover, gelling acid is the main acid solution for high-temperature reservoir acidizing transformation, with a temperature resistance of no more than 180 °C, and the gelling agent is one of the key factors restricting its high-temperature resistance performance. In this paper, AM, AMPS, DMDAAC, and NVP were used as monomers, oxidants, and reducing agents to prepare a high-temperature-resistant polymer gel through polymerization. At the same time, microcapsules were prepared by in situ polymerization using epoxy resin as the wall material. The indoor performance evaluation results indicate that the gelling agent is easily soluble in high-concentration acid solution and has good viscosity increasing effect. At 180 °C and 170 s-1 shear rate, 0.8% mass fraction of the gelling agent was dissolved in 20% mass fraction of hydrochloric acid. After shearing for 60 min, the viscosity remained at about 22.45 mPa·s, demonstrating good temperature resistance and shear resistance, and its performance was superior to existing commonly used gelling agent products.

31 March 2020 in RSC Advances
Verified
Journal Article
Open access
PDF file
YLYunfeng Liu
Yunfeng Liu
ZQZhengsong Qiu
Zhengsong Qiu
HZHanyi Zhong
Hanyi Zhong
XZXin Zhao
Xin Zhao
WHWeian Huang
Weian Huang
XXXijin Xing
Xijin Xing
Solvent extraction is commonly used to separate mixtures of hydrocarbons and their derivatives, and solvent choice is strongly influenced by the affinity to the target component, cost and safety. Nitrogen-containing switchable solvents can switch from water-immiscible form to water-miscible bicarbonate salts when CO2 is injected and back to water-immiscible form when N2 is injected. Switchable solvents, as a type of recyclable green solvent, can be used not only to separate such mixtures but also to reduce process costs. Herein, four switchable solvents, namely, dipropylamine, di-sec-butylamine, N,N-dimethylcyclohexylamine (CyNMe2), and N,N,N′,N′-tetraethyl-1,3-propanediamine (TEPDA), were employed to separate benzene/cyclohexane, ethyl acetate/acetonitrile, and ethyl acetate/n-heptane mixtures, and the corresponding partition and selectivity coefficients were determined. In all cases, separation selectivity increased in the order of dipropylamine < di-sec-butylamine < CyNMe2 < TEPDA, i.e., TEPDA was best suited for the separation of hydrocarbons and their derivatives. In addition, cycling experiments revealed that the TEPDA can be re-used at least 15 times and was well suited for industrial applications. In the end, the mechanism of the separation was put forward.