The purpose of this study is to model the dynamic characteristics of an opened supersonic disk-gap-band parachute. A fluid-structure interaction (FSI) method with body-fitted mesh is used to simulate the supersonic parachute. The compressible flow is modeled using large-eddy simulation (LES). A contact algorithm based on the penalty function with a virtual contact domain is proposed to solve the negative volume problem of the body-fitted mesh. Automatic unstructured mesh generation and automatic mesh moving schemes are used to handle complex deformations of the canopy. The opened disk-gap-band parachute is simulated using Mach 2.0, and the simulation results fit well with the wind tunnel test data. It is found that the LES model can successfully predict large-scale turbulent vortex in the flow. This study also demonstrates the capability of the present FSI method as a tool to predict shock oscillation and breathing phenomenon of the canopy. The contact algorithm based on the penalty function with a virtual contact domain is proposed for the first time. This methodology can be used to solve the negative volume problem of the dynamic mesh in the flow field.
Purpose The purpose of this paper is to find optimal reef parameters to minimize the maximum instantaneous opening load for a reefed parachute with geometry and environmental parameters given in the model. Design/methodology/approach The dynamic model Drop Test Vehicle Simulation (DTVSim) is used to model the inflation and descent of the reefed parachute system. It is solved by the fourth-order Runge–Kutta method, and the opening load values are thereby obtained. A parallel genetic algorithm (GA) code is developed to optimize the reefed parachute. A penalty scheme is used to have the maximum dynamic pressure restricted within a certain range. Findings The simulation results from DTVSim fit well with experimental data from drop tests, showing that the simulator has high accuracy. The one-stage and two-stage reefed parachute systems are optimized by GA and their maximum opening loads are decreased by 43 and 25 per cent, respectively. With the optimal reef parameters, two of the peaks in the opening load curve are almost equal. The velocity, loiter time and flight path angle of the parachute system all change, but these changes have no negative effect on the parachute’s operational performance. Originality/value An optimization method for reefed parachute design is proposed for the first time. This methodology can be used in the preliminary design phase for a reefed parachute system and significantly improve design efficiency.
Purpose: The purpose of this study was to develop a new folding method for modeling complicated folded fabric with surfaces of revolution. Design/methodology/approach: Irregular wrinkles and mesh distortions easily appear in the fold modeling of a complex curved surface. Aimed at this key technical problem, the segmentation mapping folding method (SMFM) is proposed in this paper. First, high-precision flattened planes were obtained by using segmentation mapping techniques. Second, the segmented planes were transformed into a folded and continuous geometric model by using matrix transformations. Finally, initial stress was used to modify the geometric folding errors, which ensured agreement with the inflated flexible fabric’s geometry and the original design. Findings: Compared with the traditional folding method, SMFM has the advantages of good finite-element mesh quality, large radial compression rate, regular folds, etc. The surface area error and the volume error of the inflated single torus established by SMFM were only 1.2 per cent, showing that SMFM has high modeling accuracy. The numerical results of an inflatable re-entry vehicle are presented to demonstrate the reliability, feasibility and applicability of SMFM. Moreover, the stress modification reduced the problems of stress concentration and mesh distortions, improving the accuracy and stability of the numerical calculations. Originality/value: In this paper, for the first time, a folding method for modeling complicated folded fabric is proposed. This methodology can be used to model the multidimensional compression and regular folds of complex surfaces of revolution that cannot be flattened and to improve the accuracy and stability of the numerical calculations.