The geometric Pancharatnam-Berry (PB) phase not only is of physical interest but also has wide applications ranging from condensed-matter physics to photonics. Space-varying PB phases based on inhomogeneously anisotropic media have previously been used effectively for spin photon manipulation. Here we demonstrate a novel wave-vector-varying PB phase that arises naturally in the transmission and reflection processes in homogeneous media for paraxial beams with small incident angles. The eigenpolarization states of the transmission and reflection processes are determined by the local wave vectors of the incident beam. The small incident angle breaks the rotational symmetry and induces a PB phase that varies linearly with the transverse wave vector, resulting in the photonic spin Hall effect (PSHE). This new PSHE can address the contradiction between spin separation and energy efficiency in the conventional PSHE associated with the Rytov-Vladimirskii-Berry phase, allowing spin photons to be separated completely with a spin separation up to 2.2 times beam waist and a highest energy efficiency of 86%. The spin separation dynamics is visualized by wave coupling equations in a uniaxial crystal, where the centroid positions of the spin photons can be doubled due to the conservation of the angular momentum. Our findings can greatly deepen the understanding in the geometric phase and spin-orbit coupling, paving the way for practical applications of the PSHE.

Graphene-based electrical chemical vapor sensors can achieve extremely high sensitivity, whereas the comparatively slow sensing response and recovery, the research focused on only low concentration detection, have been known as drawbacks for many applications requiring rapid and high concentration detection. Here we report a novel graphene-based fiber-optic relative humidity (RH) sensor relying on fundamentally different sensing mechanism. The sensor can achieve power variation of up to 6.9 dB in high relative humidity range (70-95%), and display linear response with correlation coefficient of 98.2%, sensitivity of 0.31 dB/%RH, response speed of faster than 0.13%RH/s, and good repeatability in 75-95%RH. Theoretical analysis of sensing mechanism can explain the experimental result, and reveal the broad applying prospect of the sensor for other kinds of chemical vapor detection. This novel graphene-based optical sensor provides a beneficial complement to the existing electrical ones, and will promote the employment of graphene in chemical sensing techniques.

Pilot line manufactured custom quartz tuning forks (QTFs) with a resonance frequency of 28 kHz and a Q value of >30, 000 in a vacuum and ∼ 7500 in the air, were designed and produced for trace gas sensing based on quartz enhanced photoacoustic spectroscopy (QEPAS). The pilot line was able to produce hundreds of low-frequency custom QTFs with small frequency shift < 10 ppm, benefiting the detecting of molecules with slow vibrational-translational (V-T) relaxation rates. An Au film with a thickness of 600 nm were deposited on both sides of QTF to enhance the piezoelectric charge collection efficiency and reduce the environmental electromagnetic noise. The laser focus position and modulation depth were optimized. With an integration time of 84 s, a normalized noise equivalent absorption (NNEA) coefficient of 1.7 × 10-8 cm-1∙W∙Hz-1/2 was achieved which is ∼10 times higher than a commercially available QTF with a resonance frequency of 32 kHz.

A novel fiber structure, coreless side-polished fiber (CSPF) that is wrapped by polydimethylsiloxane (PDMS), is demonstrated to be highly sensitive to temperature because of the high refractive index sensitivity of the CSPF and the large thermal optic coefficient of the PDMS. Our numerical and experimental results show that the several dips in the transmitted spectra of PDMSW-CSPF is originated from the multimode interference (MMI) in the CSPF and will blueshift with the increase of temperature. Furthermore, for such a PDMSW-CSPF, we investigate its temperature sensing characteristics and the influences of residual thickness (RT) and dip wavelength on the sensitivity both numerically and experimentally. In the temperature range of 30~85°C, the PDMSW-CSPF with RT = 43.26 μm exhibits a high temperature sensitivity of −0.4409 nm/°C, the high linearity of 0.9974, and the high stability with low standard deviation of 0.141 nm. Moreover, in the cycle experiments, where the environmental temperature was set to automatically increase and then decrease, the PDMSW-CSPF exhibits a low relative deviation of sensitivity (RSD) of down to ± 0.068%. Here, the RSD is defined as the ratio of sensitivity deviation to the average sensitivity measured in the heating/cooling cycle experiments. The lower RSD indicates that PDMSW-CSPF has better reversibility than other fiber structure. The investigations also show that the sensitivity of the PDMSW-CSPF could be enhanced further by reducing the residual thickness and choosing the dip at a longer wavelength.

Hydrogen cyanide (HCN) is a toxic industrial chemical, necessitating low-level detection capabilities for safety and environmental monitoring. This study introduces a novel approach for detecting hydrogen cyanide (HCN) using a clamp-type custom quartz tuning fork (QTF) integrated with a dual-tube acoustic micro-resonator (AmR) for enhanced photoacoustic gas sensing. The design and optimization of the AmR geometry were guided by theoretical simulation and experimental validation, resulting in a robust on-beam QEPAS (Quartz-Enhanced Photoacoustic Spectroscopy) configuration. To boost the QEPAS sensitivity, an Erbium-Doped Fiber Amplifier (EDFA) was incorporated, amplifying the laser power by approximately 286 times. Additionally, a transformer-based U-shaped neural network, a machine learning filter, was employed to refine the photoacoustic signal and reduce background noise effectively. This combination yielded a significantly low detection limit for HCN at 0.89 parts per billion (ppb) with a rapid response time of 1 second, marking a substantial advancement in optical gas sensing technologies. Key modifications to the QTF and innovative use of AmR lengths were validated under various experimental conditions, affirming the system's capabilities for real-time, high-sensitivity environmental monitoring and industrial safety applications. This work not only demonstrates significant enhancements in QEPAS but also highlights the potential for further technological advancements in portable gas detection systems.

Solar-blind photodetectors have drawn great attention due to their excellent accuracy and precision ignoring the electromagnetic radiation interference from the sun. Here, we demonstrate a solar-blind photodetector by combining the inorganic wide bandgap semiconductor β-Ga₂O₃ with organic–inorganic hybrid perovskite (CH₃NH₃PbI₃) for the first time. The photodetector with an intelligent architecture design and assembly technique was developed via a facile and low-cost solution processing method. Compared with the pure β-Ga₂O₃ photodetector, the performances of the device based on the CH₃NH₃PbI₃/β-Ga₂O₃ hybrid structure were significantly enhanced. The photo-to-dark current ratio is 1460, the responsivity and detectivity are 85 mA W⁻¹ and 1.28 × 10¹¹ Jones, respectively. The device exhibits excellent reproducibility and stability under DUV light illumination, the rise and decay times are 0.11 and 0.45 s, respectively. The superior solar-blind/UVA rejection ratio (I_254nm/I_325nm) with a value of 221 indicates that our fabricated photodetector has an excellent sensitivity in the solar-blind region. This work can offer a new strategy to develop cheap and high-performance solar-blind photodetectors based on β-Ga₂O₃.