Aleksandra Kuryłowicz-Cudowska

Aleksandra Kuryłowicz-Cudowska

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 February 2022 in Materials
Verified
Journal Article
Open access
PDF file
EHElzbieta Haustein
Elzbieta Haustein
AKAleksandra Kuryłowicz-Cudowska
Aleksandra Kuryłowicz-Cudowska
ALAneta Luczkiewicz
Aneta Luczkiewicz
SFSylwia Fudala-Ksiazek
Sylwia Fudala-Ksiazek
BCBartłomiej Michał Cieślik
Bartłomiej Michał Cieślik
The amount of fly ash from the incineration of sewage sludge is increasing all over the world, and its utilization is becoming a serious environmental problem. In the study, a type of sewage sludge ash (SSA) collected directly from the municipal sewage treatment plant was used. Five levels of cement replacement (2.5%, 5%, 7.5%, 10% and 20%) and unchanged water-to-binder (w/b) ratio (0.55) were used. The purpose of the study was to evaluate the effect of sewage sludge ash (SSA) on the hydration heat process of cement mortars. The heat of the hydration of cement mortars was monitored by the isothermal calorimetric method for 7 days at 23 °C. The analysis of chemical composition and particle size distribution was performed on the tested material. The tests carried out have shown that SSA particles have irregular grain morphology and, taking into account the chemical composition consists mainly of oxides such as CaO, P2O5, SiO2 and Al2O3. The concentration of these compounds affects the hydration process of cement mortars doped with SSA. In turn, the content of selected heavy metals in the tested ash should not pose a threat to the environment. Calorimetric studies proved that the hydration process is influenced by the presence of SSA in cement mortars. The studies showed that the rate of heat generation decreased (especially in the initial setting period) with the increasing replacement of cement by SSA, which also reduced the amount of total heat compared to the control cement mortar. With increasing mass of the replacement of cement with SSA up to 20%, the 7-day compressive strength of the mortar samples decreases.

9 January 2020 in Minerals
Verified
Journal Article
Open access
PDF file
EHElzbieta Haustein
Elzbieta Haustein
AKAleksandra Kuryłowicz-Cudowska
Aleksandra Kuryłowicz-Cudowska
The fly ash microspheres (FAMs) formed during the mineral transformation stage in coal combustion are hollow spherical particles with a density less than water. This paper presents the results of X-ray micro-computed tomography and an automatic image analysis system of the porosity in the structure of hardened concrete with microspheres. Concrete mixtures with ordinary Portland cement and two substitution rates of cement by microspheres—5% and 10%—are investigated. For all considered mixes, a constant water/binder ratio (w/b) equal to 0.50 was used. The distribution of the air voids and the compressive strength of the concrete were tested after 28 days. With the increasing mass of cement replacement by FAMs, the compressive strength decreases after 28 days. The total volume of the air voids in hardened concrete with fly ash microspheres tested by X-ray varies from 5.1% to 7.4%. The closed pores constitute more than 80% of the total content of air pores. The study proves that the use of microspheres grains with specific dimensions has a significant impact on concrete porosity. Their application in concrete technology can be an alternative aeration solution for fresh concrete mixes and an effective method for utilization.

1 July 2022 in Minerals
Verified
Journal Article
Open access
PDF file
EHElzbieta Haustein
Elzbieta Haustein
AKAleksandra Kuryłowicz-Cudowska
Aleksandra Kuryłowicz-Cudowska
This paper presents the investigations of selected properties of concrete containing two fractions of fly ash microspheres (FAMs) with grain size up to 200 µm and up to 500 µm. Concrete mixtures with ordinary Portland cement and three substitution rates of cement by FAMs, 1.3%, 2.0%, and 2.6%, were investigated. For all concrete mixes, the constant water–binder ratio (w/b) equal to 0.50 was used. The research program included the determination of chemical composition, particle size distribution, and pozzolanic activity of FAMs. The analysis showed that the microspheres consist of three main elements: silicon, aluminum, and iron, whose oxides constitute about 89% of the material. The total content of air pores, measured in concrete at 28 days, ranges from 1.3 to 3.1% for the grain sizes below 200 µm and from 1.4% to 3.9% for the grain sizes up to 500 µm. The FAMs with a particle diameter < 200 µm have a relatively high level of activity pozzolanic at 28 days. The SEM analysis proved that the use of microspheres reduces gaps and increases the CSH phase. The compression test showed that the addition of fly ash microspheres with grain size below 200 µm increases long-term concrete strength.

1 September 2020 in Construction and Building Materials
Verified
Journal Article
Open access
AKAleksandra Kuryłowicz-Cudowska
Aleksandra Kuryłowicz-Cudowska
KWKrzysztof Wilde
Krzysztof Wilde
JCJacek Chróścielewski
Jacek Chróścielewski

20 November 2022 in Minerals
Verified
Journal Article
Open access
PDF file
AKAleksandra Kuryłowicz-Cudowska
Aleksandra Kuryłowicz-Cudowska
This paper presents the results of calorimetric and strength tests of mortars with ordinary Portland cement and two substitution rates (10 and 20%) of cement by siliceous fly ash. The prepared samples were cured under isothermal conditions at four different temperatures: 23, 33, 43 and 53 °C. Heat of hydration was measured using an isothermal calorimeter dedicated to monitor the hydration process of cementitious composites such as paste, mortar and concrete. Thermal data were recorded continuously for 7 days, while compression tests were performed at 6 h and 1, 2, 5, 7 and 14 days of hardening. The studies proved that the amount of heat released correlates with the early-age strength of 50 mm mortar cubes. In the case of samples cured at 23 and 53 °C, a linear relationship between the heat of hydration and compressive strength was observed. The high value of the coefficient of determination (R2) allows one to estimate the mortar compressive strength after 7 and 14 days based on hydration heat tests conducted at standard temperature (23 °C), regardless of the percentage of siliceous fly ash. The increased curing temperatures do not guarantee a high correlation between compressive strength and the amount of heat released.

22 September 2019 in Materials
Verified
Journal Article
Open access
PDF file
AKAleksandra Kuryłowicz-Cudowska
Aleksandra Kuryłowicz-Cudowska
The paper deals with a concept of a practical computation method to simulate the temperature distribution in an extradosed bridge deck. The main goal of the study is to develop a feasible model of hardening of concrete consistent with in-situ measurement capabilities. The presented investigations include laboratory tests of high performance concrete, measurements of temperature evolution in the bridge deck and above all, numerical simulations of temperature field in a concrete box bridge girder. A thermal conductivity equation in the author’s program, using finite difference method has been solved. New approach for identification of the model parameters and boundary conditions (heat transfer coefficients) has been proposed. The numerical results are verified by means of a wide set of experimental tests carried out on three stages of the extradosed bridge studies. A high agreement between the concrete temperature distribution in the time and space domain was obtained. The temperature history of concrete hardening, supplemented with maturity method equations, made it possible to estimate an early-age compressive strength of the cast-in-place concrete. The proposed solution could be applied in a Structural Health Monitoring system for concrete objects.