The purpose of this research is to investigate the dominant parameters that influence the optimum performance of reaction typed turbine at very low water head. The concepts of conservation of mass, momentum and energy are utilised to explore performance characteristics using a graphical technique. Parametric analysis of the governing equation and experimental results were performed to show that the turbine diameter and nozzle exit area has a dynamic response to mass flow rate, angular speed, output power and efficiency. Depending on the nozzle diameter of (0.01 m, 0.006 m, and 0.008 m) and turbine pipe size with (diameter of 0.025 m and 0.015 m), six versions of prototype turbine Z-blade turbine were produced. All the turbines have been tested at 100 kPa static water pressures and below. According to a variety of experimental data for all types of turbines, the turbine diameter and nozzle exit area have a substantial impact on turbine performance, especially at high water heads. Despite differences in turbine length and nozzle exit area, more than 90 % of the pattern curves for rotational speed, water flow rate, and mechanical power were identical. Overall, the Z-blade turbine Type B outperforms, resulting in higher turbine efficiency at low head and low flow water condition.
Photovoltaic inverter conversion efficiency is closely related to the energy yield of a photovoltaic system. Usually, the peak efficiency (ηmax) value from the inverter data sheet is used, but it is inaccurate because the inverter rarely operates at the peak power. The weighted efficiency is a preferable alternative as it inherently considers the power conversion characteristics of the inverter when subjected to varying irradiance. However, since the weighted efficiency is influenced by irradiance, its value may not be appropriate for different climatic conditions. Based on this premise, this work investigates the non-suitability of the European weighted efficiency (ηEURO) for inverters installed in the Equatorial region. It utilizes a one year data from the Equatorial irradiance profile to recalculate the value of ηEURO (ηEURO_recal) and to compare it with the original ηEURO. Furthermore, a new weighted efficiency formula for the Equatorial climate (ηEQUA) is proposed. Validation results showed that calculated energy yield with ηEQUA closely matched the real energy yield of 3 kW system with only 0.16% difference. It is envisaged that the usage of ηEQUA instead of ηmax or ηEURO will results in a more accurate energy yield and return of investment calculations for PV systems installed in Equatorial regions.
30 October 2024 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Continued usage of fossil fuel-based electricity generation is one of the main factors for the greenhouse effect. As the greenhouse effect increase, the ambient temperature of the earth will also increase. As the temperature increase, the usage of air conditioning in buildings is also expected to increase. Since that more than 50 % of building energy consumption goes to air conditioning, it is utterly important to look into the methods that can be used to predict the impact of variations in temperature towards building energy consumption. This paper hence tries to perform a conceptual review on the prevalent methods that have been used for prediction of energy consumption, grouped in the category known as the white box, grey box and black box. The comparison of the different methods used in forecasting of energy consumption is discussed in terms of application, input, specific approach, advantage and disadvantage. It is hoped that the work carried out in this paper will be the reference to jump start the research work of others in this field of study.