The aim of this work was to assess the effect of fish gelatin–citric acid nucleophilic substitution and agar–citric acid esterification reactions on the properties of agar/fish gelatin films. Since temperature is an important cross-linking parameter, films were treated at 90 °C and 105 °C and film properties were compared to those of non-cured films. It was observed that temperature favored the aforementioned reactions, which induced physical and morphological changes. In this regard, darker films with a rougher surface were obtained for the films with a higher cross-linking degree. While mechanical properties were slightly modified, the barrier properties were enhanced due to the reactions that occurred. Therefore, these agar/fish gelatin films cross-linked through two different reactions can be considered to be promising materials as active films for different purposes, such as active packaging or pharmaceutical applications.

Dye and heavy metal contaminants are mainly aquatic pollutants. Although many materials and methods have been developed to remove these pollutants from water, effective and cheap materials and methods are still challenging. In this study, highly porous hydroxyapatite/graphene oxide/chitosan beads (HGC) were prepared by a facile one-step method and investigated as efficient adsorbents. The prepared beads showed a high porosity and low bulk density. SEM images indicated that the hydroxyapatite (HA) nanoparticles and graphene oxide (GO) nanosheets were well dispersed on the CTS matrix. FT-IR spectra confirmed good incorporation of the three components. The adsorption behavior of the obtained beads to methylene blue (MB) and copper ions was investigated, including the effect of the contact time, pH medium, dye/metal ion initial concentration, and recycle ability. The HGC beads showed rapid adsorption, high capacity, and easy separation and reused due to the porous characteristics of GO sheets and HA nanoparticles as well as the rich negative charges of the chitosan (CTS) matrix. The maximum sorption capacities of the HGC beads were 99.00 and 256.41 mg g⁻¹ for MB and copper ions removal, respectively.