Conventional internal combustion engine vehicles generally have less than a 30% of fuel efficiency, and the most wasted energy is dissipated in the form of heat energy. The excessive heat dissipation is a primary reason of poor fuel efficiency, but reclamation of the heat energy has not been a main focus of vehicle design. Thanks to thermoelectric generators (TEGs), wasted heat energy can be directly converted to electric energy. All the heat exchangers, including vehicle radiators, gradually cool down the coolant or gas from the inlet to outlet. TEG modules are commonly mounted throughout the heat exchanger to fulfill the required power density and voltage. Each TEG module has a different hot-side temperature by the mounting location (distance from the inlet) and thus different maximum power point (MPP) voltage and current. Nevertheless, TEG modules are commonly connected in series and parallel, where both the ends are connected to a single power converter. As a result, the whole TEG module array exhibits a significant efficiency degradation even if the power converter has the MPP tracking capability. Although material and device researchers have been putting a lot of effort in enhancing TEG efficiency, such system-level issue has not been deeply investigated. This paper proposes a cross-layer, system-level solution to enhance TEG array efficiency introducing online reconfiguration of TEG modules. The proposed method is useful for any sort of TEG arrays to reclaim wasted heat energy, because heat exchangers generally have different inlet and outlet temperature values. This paper also introduces a complete design and implementation showcase of a reconfigurable TEG module building block. Experimental results show up to a 34% enhancement using the proposed method compared with a fixed array structure, which is a common practice.
9 April 2018 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Thermal analysis and management of batteries have been an important research issue for battery-operated systems, such as electric vehicles and mobile devices. Nowadays, battery packs are designed considering heat dissipation, and external cooling devices, such as a cooling fan, are also widely used to enforce the reliability and extend the lifetime of a battery. However, this type of approaches cannot achieve an immediate temperature drop to avoid a thermal emergency situation. Approaches based on removing the heat from the heat sources via idle period insertion (similar to what is done for silicon devices) would allow faster thermal response; however, it is not obvious how to implement these schemes in the context of batteries. In this paper, we propose the use of a simple parallel battery-supercapacitor hybrid architecture with a dual-mode discharge strategy that can provide immediate temperature management, in which the supercapacitor is used as an energy buffer during the idle periods of the battery. Simulation results show that the proposed method can reduce the battery temperature during charge and discharge while exploiting the advantage of the parallel connection.
The de-facto standard approach in battery modeling consists of the definition of a generic model template in terms of an equivalent electric circuit, which is then populated either using data obtained from direct measurements on actual devices or by some extrapolation of battery characteristics available from datasheets. These models typically describe only intra-cycle effects, that is, those manifesting within a single charge/discharge cycle of a battery. However, basic battery dynamics, during a single discharge, cannot provide a true estimate of the actual lifetime of the battery, e.g., how its usability decreases due to long-term and irreversible effects, such as the fading of capacity due to aging or to repeated cycling. While some solutions in the literature provide answers to this problem by proposing suitable models for these effects, they do not provide solutions for how to incorporate them into a generic model template. In this work we propose a method to include inter-cycle battery effects into a reference model template in an automated way, and using solely data reported by battery manufacturers. Flexibility and accuracy of the proposed strategy are demonstrated by modeling a commercial lithium iron phosphate battery, whose datasheet provides long-term capacity fading information.
Emerging mobile systems integrate a lot of functionality into a small form factor with a small energy source in the form of rechargeable battery. This situation necessitates accurate estimation of the remaining energy in the battery such that user applications can be judicious on how they consume this scarce and precious resource. This paper thus focuses on estimating the remaining battery energy in Android OS-based mobile systems. This paper proposes to instrument the Android kernel in order to collect and report accurate subsystem activity values based on real-time profiling of the running applications. The activity information along with offline-constructed, regression-based power macro models for major subsystems in the smartphone yield the power dissipation estimate for the whole system. Next, while accounting for the rate-capacity effect in batteries, the total power dissipation data is translated into the battery's energy depletion rate, and subsequently, used to compute the battery's remaining lifetime based on its current state of charge information. Finally, this paper describes a novel application design framework, which considers the batterys state-of-charge (SOC), batterys energy depletion rate, and service quality of the target application. The benefits of the design framework are illustrated by examining an archetypical case, involving the design space exploration and optimization of a GPS-based application in an Android OS.