This paper introduces an improved quadratic DC-DC boost converter to provide an ultra-high level voltage gain with the switched-capacitor cell based structure. The proposed converter has the ability to excel the output voltage gain to the ultra-high level without any voltage doubler circuit. Hence, the total number of components is less compared to the conventional topologies. The proposed converter offers reduced voltage stress on the capacitors, diodes, and semiconductor switches while generating a high voltage gain effect with a low duty cycle. In addition, the continuous source current (CSC) and input-to-output side ground-sharing features are also available for renewable energy applications. The steady-state and comparative performance analysis with similar topologies and power loss calculations are presented in this paper. Furthermore, the simulation results extracted from the Matlab/Simulink are compared and analyzed with the conventional topology. Finally, the experiments are carried out by designing a 150 W laboratory prototype where the peak efficiency is found 90% while delivering 80 W power to the load side.

The Z‐source inverter is one of the most interesting power electronic converters. Over the past decades, research and development have been in high demand to meet the challenges for improving the converter performance with reduced weight and cost while having high efficiency along with high gain or boost factor. Since the inception, tons of resolutions, customizations, and improvements have appeared to achieve these performance goals. To overcome the most common drawback, i.e. the low boost factor of classical Z‐source inverters, the switched inductor/capacitor and switched boost Z‐source inverter topologies have become predominant in the recent epoch. Furthermore, the higher component voltage stress, discontinuous input current, and high inrush start‐up current issues have also been addressed and solved in various literature as part of this topical advancement. In this study, a comprehensive review of various switched impedance network‐based Z‐source inverter topologies has been accomplished for providing a quick report to researchers and engineers so that they can consider this as a one‐stop solution for selecting inverters from this group. The overall study covers the methodology, features, and relevant important results of the latest switched Z‐source inverter models in order to demonstrate the coordination between pitfalls and improvements.

With the evolution of the smart grid concept, the production of electric vehicles (EVs) is predicted to rise because of environmental concerns, technological advancements, and improvements in EV management. Vehicle‐to‐grid (V2G) is an enabling, realistic, and affordable technology to cope with a large number of EVs, increase energy sustainability, provide economical solutions, satisfy user‐side consumers, and facilitate power flow to the grid. Power electronics (PE) converters, particularly bidirectional power converters, are promising interfaces for V2G infrastructure because they determine the characteristics and functionalities of V2G. Therefore, this study provides an extensive review of the characteristics, technological aspects, and visions of V2G infrastructure. This review helps to identify the current state, most recent developments, and problems related to bidirectional interface topologies and control strategies in V2G infrastructure. It further examines the classification of chargers or dischargers based on numerous factors, including limitations and impacts. Furthermore, the benefits, challenges with possible mitigation solutions, and future outlooks in the implementation of V2G technology are discussed. This review is planned to serve as a reference for existing work in V2G frameworks, PE interfacing topologies, and control strategies, and to also facilitate a guideline for future work that can be implemented to flourish V2G technology.

In this paper, the performance of a new Z-source inverter (ZSI)-based single-stage power conditioning system (PCS) is analyzed for a standalone photovoltaic (PV) power generation system. The proposed ZSI-based PCS includes two main parts: one is the input from PV units and the other is the ZSI. In this work, a new topology, termed the switched inductor-assisted strong boost ZSI (SL-SBZSI), is introduced for improving the performance of the PCS. The proposed topology shows high boosting capability during the voltage sag in PV units due to variations in solar irradiation and temperature. Another key advantage is the reduced capacitor voltage stress and semiconductor switch voltage stress of the inverter bridge, which ultimately minimizes the size and cost of the single-stage PCS. The proposed ZSI topology falls under the doubly grounded category of inverter by sharing the common ground between the input and output. This is an additional feature that can minimize the leakage current of PV units at the ac output end. The operational principles, detailed mathematical modeling, and characteristics of the proposed SL-SBZSI for a standalone photovoltaic (PV) power generation system is presented in this paper for analyzing performance. The simulation results, which are performed in MATLAB/Simulink, demonstrate the improved performance of the proposed SL-SBZSI for the standalone PV system. The performance of the proposed topology is also evaluated through an experimental validation on a laboratory-based PV system.

The unmanned aerial vehicle communication networks (UAVCNs) are composed of unmanned aerial vehicles (UAVs) connected in ad hoc mode to facilitate vertical communication in 5G and beyond networks. UAVs operating in an ad hoc mode of operation mostly use reactive routing protocols to establish routes in the network to reduce the energy consumption of the nodes. In this article, a route discovery method is presented to reduce the overhead faced by reactive routing protocols during the route discovery phase. The expanding ring search (ERS) method is mostly used by reactive routing protocols in the destination discovery phase of the routing algorithm. Although the performance of the ERS method is better than simple flooding, the presented method further reduces energy consumption and routing overhead as compared to the conventional ERS method. To achieve the task, the time to live (TTL) is modified to accommodate a large number of nodes in a search attempt. We proposed variants of the proposed techniques for diverse application requirements and compared the performance with the state-of-the-art ERS technique. It has been demonstrated with the help of simulations that the presented algorithm outperforms the ERS method in terms of reduced routing overhead and reduced energy consumption.

In this paper, a non-isolated quadratic boost DC-DC converter has been proposed. The proposed converter provides high output voltage gain with a lower component count on the structure. In addition, the input side inductor provides continuous source current and the output voltage is positive. Since the proposed topology possesses the continuous source current, it simplifies the filter design at the input side further making the converter suitable for photovoltaic applications. Another important feature of this converter includes the utilization of the same switch ground that omits the additional control power supply in the system design. The detailed mathematical modeling of the proposed topology including the steady state analysis for different modes of operations, voltage stress calculations of the components, and power loss calculations have been precisely demonstrated in this work. The simulation has been carried out in Matlab/Simulink software. Finally, a 250 W experimental prototype has been developed and tested in the laboratory environment and the peak efficiency of the proposed topology has been found 92% at 50% duty cycle, which validates the correctness of the theoretical and simulation outcomes of the proposed work.