Ten-Koh is a 23.5 kg, low-cost satellite developed to conduct space environment effects research in low-Earth orbit (LEO). Ten-Koh was developed primarily by students of the Kyushu Institute of Technology (Kyutech) and launched on 29 October 2018 on-board HII-A rocket F40, as a piggyback payload of JAXA’s Greenhouse gas Observing Satellite (GOSAT-2). The satellite carries a double Langmuir probe, CMOS-based particle detectors and a Liulin spectrometer as main payloads. This paper reviews the design of the mission, specifies the exact hardware used, and outlines the implementation and operation phases of the project. This work is intended as a reference that other aspiring satellite developers may use to increase their chances of success. Such a reference is expected to be particularly useful to other university teams, which will likely face the same challenges as the Ten-Koh team at Kyutech. Various on-orbit failures of the satellite are also discussed here in order to help avoid them in future small spacecraft. Applicability of small satellites to conduct space-weather research is also illustrated on the Ten-Koh example, which carried out simultaneous measurements with JAXA’s ARASE satellite.

The low Earth orbit (LEO) environment exposes spacecraft to factors that can degrade the dimensional stability of the structure. Carbon Fibre/Polyether Ether Ketone (CF/PEEK) can limit such degradations. However, there are limited in-orbit data on the performance of CF/PEEK. Usage of small satellite as material science research platform can address such limitations. This paper discusses the design of a material science experiment termed material mission (MM) onboard Ten-Koh satellite, which allows in situ measurements of coefficient of thermal expansion (CTE) for CF/PEEK samples in LEO. Results from ground tests before launch demonstrated the feasibility of the MM design. Analysis of in-orbit data indicated that the CTE values exhibit a non-linear temperature dependence, and there was no shift in CTE values after four months. The acquired in-orbit data was consistent with previous ground tests and in-orbit data. The MM experiment provides data to verify the ground test of CF/PEEK performance in LEO. MM also proved the potential of small satellite as a platform for conducting meaningful material science experiments.