A new paradigm in continuous fiber-reinforced polymer fused filament fabrication based on a thermoset-thermoplastic bi-matrix material system is proposed and proved. This totally new 3-D printing concept has the potential to overcome the drawbacks and to combine the advantages of separate thermoset and thermoplastic-based, fused filament fabrication methods and to advance continuous fiber-reinforced polymer 3-D printing toward higher mechanical performances of 3-D printed parts. The novel bi-matrix 3-D printing method and preliminary results related to the 3-D printed composite microstructure and performances are reported.
A new technological process for the synthesis of composite materials based on carbon fibers and the combination of a thermoset and a thermoplastic matrix is described. The mechanical characteristics of a two-matrix composite are presented. The scope of its application is discussed.
1 April 2013 in International Polymer Science and Technology
An examination is made of the building of the applied theory of a composite anisotropic rod operating in tension accompanied with torsion. The structure of the rod consists of internal fibres, spirally oriented by slight twisting about the rod's axis, and an outer pair of spirally crossing layers. An analysis is made of the strain state of a rod loaded by an axial force, and relations are obtained for determining the displacement and turning of the end section of the rod.
1 January 2010 in Composites: Mechanics, Computations, Applications: An International Journal
An optimal design method of orthotropic laminated panels in a plane stress state according to the strength condition is presented. The design parameters are: ply orientation angles, ply thicknesses, and the number of plies. The criterion of optimality is the minimum of the panel thickness. The strength constraint is the quadratic criterion of a ply strength that takes into account the extension and compression strength of the material. The directed sorting method with the refining search by the conjugate directions method is used to solve the problem. The numerical results are presented for different load cases. The proposed method allows one to find a number of equivalent optimal structures and it is confirmed by the results.