Cheng-Yu Tang

Prof. Cheng-Yu Tang

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 June 2015 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
CTCheng-Yu Tang
Cheng-Yu Tang
YCYao-Ting Chen
Yao-Ting Chen
YCYaow-Ming Chen
Yaow-Ming Chen
A multi-mode operation for the three-phase photovoltaic (PV) power system with low-voltage ride-through (LVRT) capability is proposed. With the proposed multi-mode control strategy, the active power from the PV arrays can be continuously extracted by the interleaved boost converter during LVRT, whereas the maximum power point tracking operation can be quickly achieved after the grid fault clearance. In addition, the multi-channel boost converter with interleaved operation can increase power conversion efficiency while decreasing the input current ripple. On the other hand, the current amplitude limitation control of the three-phase inverter can provide maximum reactive power under rated current amplitude during the voltage sag period and output the demanded reactive/rated current ratio to meet different LVRT codes. A three-phase 5-kVA prototype PV converter is built and tested to verify the performance of the proposed multi-mode operation strategy and the LVRT capability.

7 April 2015 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
CTCheng-Yu Tang
Cheng-Yu Tang
YCYen-Fu Chen
Yen-Fu Chen
YCYaow-Ming Chen
Yaow-Ming Chen
YCYung-Ruei Chang
Yung-Ruei Chang
The objective of this paper is to propose a three-phase back-to-back active power conditioner (APC) with dc-link voltage control strategies for microgrid applications. The demanded active and reactive powers of the APC via bidirectional power flow control can help to regulate the frequency and voltage of microgrids to achieve high stability. Moreover, the dc-link capacitor is the necessary component of the back-to-back APC for power decoupling and power flow balancing. In order to provide the ability to improve the power quality and stability of microgrids as well as to reduce the dc-link capacitance, two dc-link voltage control methods are developed: 1) optimal ac-line current regulation strategy and 2) dynamic dc-link voltage regulation (DDVR) strategy. Under steady state, the proposed optimal ac-line current regulation strategy is able to minimize the change of the input current variation as well as to achieve the dc-link regulation in one 60-Hz cycle. As soon as an abrupt or continuous power change occurs, the dc-link voltage of the APC will be changed dramatically, and the voltage protection could easily be triggered. Therefore, a novel DDVR strategy is proposed in order to prevent the false alarm as well as to reduce the required dc-link capacitance. Thorough mathematical equations corresponding to the proposed dc-link voltage control strategy are presented which can be used to determine the appropriate dc-link capacitance. Computer simulations and hardware experiments obtained from a 5-kVA prototype circuit demonstrate the feasibility and performance of the proposed APC.

15 August 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
CTCheng-Yu Tang
Cheng-Yu Tang
CWChin-Wen Wang
Chin-Wen Wang
HCHuei-Chen Chien
Huei-Chen Chien
The objective of this letter is to propose a dynamic smooth transition control (DSTC) integrated with hybrid modulation for wide output voltage range bidirectional CLLC resonant converters. Traditionally, the pulse frequency modulation (PFM) technique is adopted for CLLC resonant converters. However, under the low output voltage and light load condition, the PFM control might be failed because of the parasitic effect under high-frequency operation. To solve this issue, the phase-shift modulation (PSM) can be included to achieve wide output voltage range and full load operation. Therefore, the hybrid modulation integrated with PFM and PSM is utilized in this letter. Moreover, in order to suppress the voltage fluctuation and to reduce the response time during the mode switching transient, a DSTC is proposed in this letter. The proposed control can be implemented by the digital signal processor without adding extra circuit and components. Finally, a 2-kW prototype CLLC resonant converter is built to verify the performance and feasibility of the proposed circuit and control strategy. Experimental results show that the peak circuit conversion efficiency is 96.7%, whereas the improvement of the voltage fluctuation and the transient response time during the mode switching are equal to 50% and 42%, respectively.

7 July 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
CTCheng-Yu Tang
Cheng-Yu Tang
HWHsueh-Ju Wu
Hsueh-Ju Wu
CLChun-Yen Liao
Chun-Yen Liao
HWHsiu-Hsien Wu
Hsiu-Hsien Wu
The maximum power point tracking (MPPT) is an essential function of the PV power system to achieve the maximum PV power utilization. Traditionally, the MPPT can be realized by a duty cycle modulated dc–dc converter. However, if the LLC resonant converter is considered for the PV power system, the frequency-modulated MPPT algorithm should be adopted. Several strategies such as the frequency-based perturbation and observation (P&O) method and the center point iteration (CPI) method were proposed for the LLC resonant converter. However, with the conventional P&O method, there will be a tradeoff between the tracking speed and the oscillation phenomenon. Besides, the CPI method is unable to maintain the maximum power output under varying environmental conditions. In view of this, an optimal frequency-modulated hybrid MPPT algorithm is proposed in this article. First, the proposed frequency-modulated impedance-matching (FMIM) method is developed to track an optimal operation point under present environmental conditions. Then, the P&O concept will be utilized to ensure maximum power harvesting from the PV array. On the other hand, the operation point calculated via the FMIM is very close to the real MPP. Therefore, the perturbation amount of the P&O method can be minimized to avoid the oscillation around the maximum power point. Operational principles and thorough mathematical derivations are also developed. Finally, both simulation results and hardware verifications obtained from a 500-W prototype circuit demonstrate the performance and feasibility of the proposed MPPT.

25 May 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
CTCheng-Yu Tang
Cheng-Yu Tang
PCPon-Tzu Chen
Pon-Tzu Chen
JJJia-He Jheng
Jia-He Jheng
The objective of this paper is to propose a PV power and energy storage system with bidirectional power flow control and hybrid charging strategies. In order to optimize the battery charging performance, five charging strategies, including: (1) the constant-current (CC) charging, (2) the pulse-ripple-current (PRC) charging, (3) the sinusoidal-ripple-current (SRC) charging, (4) the bidirectional pulse-ripple-current (BPRC) and (5) the bidirectional sinusoidal-ripple-current (BSRC) charging, are adopted. Traditionally, in order to realize these charging strategies, the PV charger should abandon the MPPT function to maintain the power flow balance. As a result, the output power of the PV array will be decreased. Therefore, bidirectional power flow control strategies are proposed to achieve the maximum PV power utilization as well as to realize the hybrid charging methods. In addition, with the proposed strategies, the bidirectional charging/discharging capability of the battery is able to increase the charging performance and the system stability. All the proposed strategies can be realized by the DSP without adding any additional circuit, component and communication mechanism. Operational principles and thorough mathematical derivations will also be presented. Finally, both simulation results and hardware verification obtained from a 5-kW prototype circuit demonstrate the performance and feasibility of the proposed strategies.

16 August 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
CTCheng-Yu Tang
Cheng-Yu Tang
JJJia-He Jheng
Jia-He Jheng
This letter proposes an active power ripple mitigation strategy for the three-phase three-wire grid-tied inverter. Under the unbalanced grid voltage scenarios, the double-line frequency oscillation will have occurred on the inverter output power and the dc-link voltage. Traditionally, the three-phase four-wire or the three-phase four-leg topology could be adopted to deal with this issue. Besides, the negative and the zero-sequence current component can be controlled to cancel out the power ripple. However, the circuit cost and control complexity might be increased. Therefore, a virtual phase-current regulation (VPCR) method is developed by adding compensation to the current feedback of the fault voltage. The compensation value is consistent with the voltage drop ratio, which can effectively offset the actual power ripple. The main feature of the VPCR is its simplicity, whereas it can be realized via the digital signal processor without adding extra circuit components. Theoretical analysis and mathematical derivations of the VPCR will also be revealed. Finally, a 3 kW prototype circuit with both simulation and experimental results verify the performance and feasibility of the proposed strategy. The experimental results show that the output power ripple can be eliminated with 64.3% via the proposed VPCR.