In order to assess the damage condition of bridge components for a large-span rigid bridge in a soft clay site in a mountainous area in China southwest, a finite element model of a large-span rigid bridge is established based on the OpenSees software, and the joint probability density distribution function of the ground motion strength and seismic demand and the marginal distribution function of the ground motion are introduced into the kernel density function. As a basis to get the method of calculating the fragility of the bridge members, and the method is verified for its feasibility, on this basis, the damage condition of the bridge components are analyzed, and finally the damage condition of the bridge system are analyzed by the first-order bounds method and the improved PCM method (IPCM). The results showed that: (1) Kernel density method (KDE) can effectively calculate the damage probability of each component, for example, under ground motions with PGA equal to 0.2 g, the probability of slight damage of the 1# pier is 29%, that of the intermediate consolidation pier (2# pier ~ 4# pier) is about 90%; the probability of slight damage of the 1# bearing is 48%, and that of the 2# bearing is 87%. (2) Reasonable value of the expansion joints can effectively reduce the probability of main beam collision. In this investigation, the value is taken as 0.18 m ~ 0.24 m. (3) The bridge system is more likely to be damaged than a single component in the system, and the damage probability of a single component cannot be used as a criterion for the bridge system in the actual working condition. Comparing the first-order boundary law with the IPCM method, the IPCM method has higher accuracy.

To study the nonlinear seismic behavior and seismic resistance of the long-span cable-stayed bridges subjected to earthquakes, the multidimensional and multisupported artificial ground motions are synthesized first based on the in situ site conditions of the bridge considering the coherent and traveling wave effects. Then, considering the material nonlinearity of the cable-stayed bridge, a 3D finite element model is established based on the OpenSees platform, and the nonlinear seismic response analysis of the bridge is carried out under the synthetic artificial ground motions. The nonlinear seismic response of main bridge components such as piers, towers, bearings, and cables is analyzed, and key conclusions and observations are drawn.

Active faults along railways in the mountainous regions of western China pose significant challenges to bridge safety. To ensure the safe operation of long-span railway bridges under complex geological conditions, this study investigates the synthesis of artificial ground motions for bridges crossing strike-slip faults and analyzes their nonlinear seismic response. First, we develop a theoretical method for simulating high- and low-frequency seismic motions using a finite fault and an equivalent velocity pulse model. Next, using a specific long-span railway cable-stayed bridge as a case study, we construct a nonlinear finite element model with OpenSees software. Finally, we assess the seismic response of key bridge components considering various crossing angles, seismic amplitudes, fault rupture directivity, and fling-step effects. The results show that the crossing angle significantly influences the seismic response, with longitudinal and transverse responses exhibiting opposite patterns. Additionally, the scaling factor of seismic motion significantly affects bridge response. For bridges crossing strike-slip faults, the longitudinal response exhibits a sudden increase in displacement due to instantaneous velocity pulses, while the transverse response shows notable residual displacement influenced by the fling-step effect. However, the critical section curvatures of bridge towers and piers remain within the elastic range across all crossing angles, indicating that controlling large displacement deformations is crucial for the seismic design of bridges crossing strike-slip faults.