With the increase in the importance of using green energy sources to meet the world's energy demands, attempts have been made to push perovskite solar cell technology toward industrialization all around the world. Improving the properties of perovskite materials as the heart of PSCs is one of the methods to fabricate favorable photovoltaic (PV) solar cells based on perovskites. Here, cadmium chloride (CdCl2) was used as an additive source for the perovskite precursor to improve its PV properties. Results indicated CdCl2 improves the perovskite growth and tailors its crystalline properties, suggesting boosted charge transport processes in the bulk and interfaces of the perovskite layer with electron–hole transport layers. Overall, by incorporation of 1.0% into the MAPbI3 layer, a maximum power conversion efficiency of 15.28% was recorded for perovskite-based solar cells, higher than the 12.17% for the control devices. The developed method not only improved the PV performance of devices but also boosted the stability behavior of solar cells due to the passivated domain boundaries and enhanced hydrophobicity in the CdCl2-based devices.
Organohalide lead perovskites (PVKs) are among the leading materials for the fabrication of high-efficiency and low-cost photovoltaic devices. Deposition of a suitable electron transport layer (ETL) plays a pivotal role in the manufacturing of perovskite solar cells (PSCs). Among all reported ETLs, zinc oxide (ZnO) has not been developed properly compared with its counterparts such as TiO2 and SnO2. In this work, we fabricated PSCs based on low-temperature solution-processed ZnO nanoparticles under ambient conditions. The degradation of PVK films on the ZnO ETL has been widely reported in the literature. We demonstrate that the localization of positive ions resulting from hydroxyl groups (–OH) present at the ZnO surface is a reason for this issue. In order to deactivate these groups, we treated the surface of the ZnO ETL with carbon nanotubes (CNTs) before the deposition of the PVK film. We found that CNTs modify the ZnO surface and stop the potential reaction between the ZnO and PVK films. The results demonstrate that the CNT modification of ZnO resulted in a PVK film with larger grains without any pinholes. Upon incorporation of CNTs into our devices, we improved the power conversion efficiency of the PSC from 15.05% to 18.79%, possibly due to the higher quality of the PVK film and improved charge extraction properties. Most importantly, PSCs based on the ZnO/CNT ETL showed better ambient and thermal stability compared to the reference PSCs.