We experimentally demonstrate mid-infrared (MIR) supercontinuum (SC) generation spanning $\sim 2.0$ to 15.1 μm in a 3 cm-long chalcogenide step-index fiber. The pump source is generated by the difference frequency generation with a pulse width of $\sim 170\mathrm{fs}$, a repetition rate of $\sim 1000\mathrm{Hz}$, and a wavelength range tunable from 2.4 to 11 μm. To the best of our knowledge, this is the broadest MIR SC generation observed so far in optical fibers. It facilitates fiber-based applications in sensing, medical, and biological imaging areas.

A novel magnetic field sensing system based on surface plasma resonance (SPR) optical fiber sensor and filled with magnetic fluid (MF) is proposed and demonstrated for the first time. In the magnetic field SPR optical fiber sensor, SPR is excited by Ag as metallic material and MF is filled into the capillary sealed with epoxy glue, which utilizes the tunable refractive index (RI) of MF, and the transmission spectrum will change with different magnetic field intensities. The magnetic-optic effect of MF and the high RI sensitivity of optical fiber SPR sensor are utilized to enhance the sensitivity of the novel magnetic field sensor significantly. In the experiment, the performances of the magnetic field sensing system are tested by applying different measured magnetic fields. The final results indicated that a sensitivity of 303 pm/Gs is achieved. Compared with other optical fiber magnetic field sensors, the advantages of the proposed sensor in this paper are simple structure, small in size, easy to make, low cost, high sensitivity, and anti-interference.

The accuracy of the surface plasmon resonance (SPR) optical fiber sensor is affected by the change of ambient temperature. Therefore, we propose a simple dual channel SPR optical fiber sensor, which can measure both glucose concentration and ambient temperature. The proposed sensor is a two-channel structure based on a no-core optical fiber (NCF): one channel is coated with gold film and polydimethylsiloxane (PDMS) to sense the ambient temperature, and the other is coated with silver film to sense glucose concentration. The experimental results show that the sensor’s sensitivity for sensing glucose concentration is 2.882 nm / %, and for sensing temperature is -2.904 nm / °C. By monitoring the real-time temperature, the accuracy of glucose concentration detection was improved. The proposed sensor has a simple and compact structure, and it is suitable for sensing glucose solution or other analyte solutions that need temperature compensation.

A biocompatible and robust fiber surface plasmon resonance (SPR) temperature sensor was fabricated based on an alcohol-filled hollow-core fiber. The fabrication process of this designed sensor included Ag film coating, liquid injection and fusion splicing, which was low-cost and efficient. Due to the high refractive index sensitivity of SPR effect and the high thermal optical coefficient of alcohol, the designed sensor performed well in temperature sensing, whose linear sensitivity reached as high as 1.16 nm/°C in the range of 35.5 °C ~ 70.1 °C. Being small in size, low in fabrication cost and highly sensitive in performance, this sensor is suitable for temperature detection during biological and chemical reactions, and has the potential to realizing multi-parameter or distributed temperature measurement.

We demonstrate the broadband cascaded four-wave mixing (FWM) and supercontinuum (SC) generation in a tellurite MOF which is made from 76.5TeO₂-6ZnO-11.5Li₂O-6Bi₂O₃ (TZLB, mol%) glass. By using a 2-μm picosecond laser with the center wavelength of ~1958 nm as the pump source, the broadband FWM with the frequency separation of ~1.1 THz is obtained. The bandwidth of the frequency comb spans a range of ~630 nm from ~1620 to 2250 nm at the average pump power of ~125 mW. With the average pump power increasing to ~800 mW, the broadband mid-infrared SC generation with the spectrum from ~900 to 3900 nm is observed. Changing the pump source to a femtosecond laser (optical parametric oscillator, OPO) with the center wavelength of ~2000 nm, solitons and dispersive waves (DWs) are obtained.

This paper proposes a highly sensitive surface plasmon resonance (SPR) refractive index sensor based on the photonic crystal fiber (PCF). The optical properties of the PCF are investigated by modulating the refractive index of a liquid analyte. The finite element method (FEM) is used to calculate and analyze the PCF structure. After optimization, the fiber can achieve high linearity of 0.9931 and an average refractive index sensitivity of up to 14,771.4 nm/RIU over a refractive index range from 1.47 to 1.52, with the maximum wavelength sensitivity of 18,000.5 nm/RIU. The proposed structure can be used in various sensing applications, including biological monitoring, environmental monitoring, and chemical production with the modification and analysis of the proposed structure.