Zhihong Fan

Dr. Zhihong Fan

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 December 2020 in Micromachines
Verified
Journal Article
Open access
PDF file
ya wangya wang
ya wang
QTQiulin Tan
Qiulin Tan
LZLei Zhang
Lei Zhang
BLBaimao Lin
Baimao Lin
MLMeipu Li
Meipu Li
ZFZhihong Fan
Zhihong Fan
There is an increasing demand for bearing temperature and strain monitoring in high-speed rotating systems. This study proposes a new multiresonance, multiplexing, wireless, passive inductance capacitance (LC) temperature and strain sensor. The sensor has two capacitors connected at different locations (turns) on the same inductor to achieve simultaneous temperature and strain measurements. The plate capacitor is connected to the inner part of the inductor and the other interdigital capacitor is connected to the outer part of the inductor to form two LC loops. The structure of the sensor is optimized through High Frequency Structure Simulator (HFSS) simulations to realize frequency separation of the two parameters and avoid mutual interference between the two signals. The sensor is fabricated on a polyimide film using electroplating technology. The experimental results show that the temperature–strain sensor can operate stably from 25 °C to 85 °C with an average sensitivity of 27.3 kHz/°C within this temperature range. The sensor can detect strains in the range of 1000–5000 με with a strain sensitivity of 100 Hz/με at 25 °C. Therefore, the proposed wireless passive LC temperature-strain sensor exhibits stable performance. In addition, the use of a single inductor effectively reduces the sensor’s area. The flexible substrate provides advantageous surface conformal attachment characteristics suitable for monitoring high-temperature rotating parts in adverse environments.

10 September 2018 in Sensors
Verified
Journal Article
Open access
PDF file
SSSanMin Shen
SanMin Shen
ZFZhihong Fan
Zhihong Fan
JDJiahao Deng
Jiahao Deng
XGXiaowei Guo
Xiaowei Guo
LZLei Zhang
Lei Zhang
XJXiong Jijun
Xiong Jijun
This paper proposes a wireless passive gas sensor based on the principle of LC mutual coupling. After the acidification of the carbon nanotube (CNT), the in-situ polymerization of the aminobenzene monomers was conducted on the surface of the acidified CNT to form a sensitive material composed of a polyaniline/carbon nanotube (PANI/CNT) composite. The Advanced Design System (ADS) software was used for simulating and analyzing the designed structure, which obtained the various parameters of the structure. A lead-free aluminum paste was printed on an alumina ceramic substrate via the screen printing technique to form an inductor coil, before the gas sensitive material was applied to prepare a wireless passive gas sensor, consisting of a single-turn inductor and interdigitated electrodes on the base structure. Finally, an experimental platform was built to test the performance of the sensor. The sensitivity of the gas sensor is about 0.04 MHz/ppm in an atmosphere with a NH3 concentration of 300 ppm. The sensor was shown to have good repeatability and high stability over a long time period.

20 December 2019 in IEEE Access
Verified
Journal Article
Open access
LZLei Zhang
Lei Zhang
QGQianqian Guo
Qianqian Guo
QTQiulin Tan
Qiulin Tan
ZFZhihong Fan
Zhihong Fan
XJXiong Jijun
Xiong Jijun
Ceramic materials are high-temperature resistant materials with promising prospects. In some applications, semiconductor devices need to be integrated with a ceramic substrate. Herein, we report on the stable operation of an Al2O3 ceramic-based amorphous-Indium gallium zinc oxide (a-IGZO) thin-film transistor (TFT) at room temperature up to 523 K. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were used to characterize the a-IGZO film. A mixed solution was printed on the surface of an insulating layer of alumina. After the combustion reaction, the metal electrode was printed on the surface of a-IGZO to obtain a TFT. The ION/IOFF ratio was 6.04×106 at 293 K, and it was maintained at 1.44×105 at 523 K. It was demonstrated that the parameters of a-IGZO TFTs such as the subthreshold swing (SS), gm and μsat changed at different temperatures. As such, they can be used as building blocks for integrated circuits that can operate at high temperatures. The fabrication of TFT-based inverters, NAND and NOR gate circuits facilitate the exploration of the possibility of more complex digital circuits that operate at high temperatures, based on hybrid circuit design.

11 February 2021 in Smart Materials and Structures
Verified
Journal Article
Closed access
PDF file
ZFZhihong Fan
Zhihong Fan
LZLei Zhang
Lei Zhang
QTQiulin Tan
Qiulin Tan
XYXue Yao
Xue Yao
BLBaimao Lin
Baimao Lin
JXJijun Xiong
Jijun Xiong
High-performance flexible pressure sensors are attracting great interest owing to their potential applications for electronic skins, human–machine interfaces, and biomedical diagnostics. However, there remain significant challenges for the fabrication of low-cost and high-sensitivity sensors. Here, we report the preparation of Ti 3 C 2 T x MXene/single-wall carbon nanotube (SWNT) composite films through vacuum-assisted filtration followed by thermal shrinkage. SWNTs can effectively prevent MXenes from stacking and improve the electrical performance of the films. The films are used as a flexible piezoresistive sensor for pressures ranging from 33 Pa to 130 kPa. And experimental test results indicate that the fabricated pressure sensors have high sensitivity (116.15 kPa −1 below 40 kPa and 12.7 kPa −1 at 40–130 kPa), a fast response time of 13 ms, and long-term stability over 6000 periods. The sensor can be used to monitor human physiological signals, such as finger movements, voice detection, and wrist pulse in real-time. Moreover, a 4 × 4 sensor array was successfully applied in the pressure distribution mapping of different objects, indicating that the pressure sensor can be applied in electronic skin, medical devices, and other wearable devices.