The traditional unsupervised change detection methods based on the pixel level can only detect the changes between two different times with same sensor, and the results are easily affected by speckle noise. In this paper, a novel method is proposed to detect change based on time-series data from different sensors. Firstly, the overall difference image of the time-series PolSAR is calculated by omnibus test statistics, and difference images between any two images in different times are acquired by R_j test statistics. Secondly, the difference images are segmented with a Generalized Statistical Region Merging (GSRM) algorithm which can suppress the effect of speckle noise. Generalized Gaussian Mixture Model (GGMM) is then used to obtain the time-series change detection maps in the final step of the proposed method. To verify the effectiveness of the proposed method, we carried out the experiment of change detection using time-series PolSAR images acquired by Radarsat-2 and Gaofen-3 over the city of Wuhan, in China. Results show that the proposed method can not only detect the time-series change from different sensors, but it can also better suppress the influence of speckle noise and improve the overall accuracy and Kappa coefficient.

The Chinese Gaofen-3 satellite currently provides us with an open way to access fully polarimetric data in the C-band frequency. The noise equivalent sigma zero (NESZ) is a crucial factor when calibrating the additive noise in radar imagery. For most radar sensors, NESZ coefficients are stored in header files, but these are not provided for the Gaofen-3 products. The minimum eigenvalue estimator (MEE) and maximum likelihood estimator (MLE) are the two most common techniques used to derive the NESZ from polarimetric imagery. Nevertheless, the bias has been found to be higher than 5 dB compared with the noise measurement circuit (NMC) of the hardware. In this article, we propose a minimum noise envelope estimator (MNEE) for the robust estimation of the Gaofen-3 NESZ. In this article, we carried out an in-depth investigation to analyze the error sources of the MEE and MLE techniques. Based on our analysis, the MNEE framework requires the use of the ocean surface as a reference, and MNEE is combined with the minimum operation to suppress overestimation. In the experimental section, we describe how we validated the proposed algorithm with Radarsat-2 images, and the MNEE is treated as a tool to estimate the NESZ of Gaofen-3 polarimetric products. We found that the Gaofen-3 NESZ is generally less than -20 dB, which satisfies the design specification. The range-dependent NESZ coefficients are provided here to allow convenient noise correction for Gaofen-3 data users.

GaoFen-3 was the first Chinese civilian C-band synthetic aperture radar (SAR) satellite, launched in August 2016. The need for monitoring the satellite’s image quality has been boosted by its widespread applications in various fields. The efficient and scientific assessment of the system’s radiometric and polarimetric performance has been essential in its more than five years of service. The authors collected 90 images of the Inner Mongolia calibration site, 888 images of the Amazon rainforest, and 39,929 images of the Chinese mainland from 2017 to 2021. This was achieved whilst covering the leading imaging modes, such as the spotlight mode, stripmap mode, ultra-fine mode, wave imaging mode, etc. In this study, we derive a framework that incorporates the man-made corner reflectors (CRs) in Mongolia, the traditional Amazon rainforest datasets, and even the long-strip data in the Chinese mainland (known as CRAS) for the purposes of GaoFen-3 radiometric quality analysis and polarimetric validation over its five years of operation. Polarimetric calibration without recourse to the CRs is utilized to measure the polarimetric distortions regardless of the region, and thus requires a higher calibration accuracy for the GaoFen-3 polarimetric monitoring task. Consequently, the modified Quegan method is developed by relaxing the target azimuth symmetry constraint with the Amazon forest datasets. The experiments based on the CRAS demonstrate that the main radiometric characteristics could reach the international level, with an estimated noise-equivalent sigma zero of approximately −30 dB, a radiometric resolution that is better than 2.9 dB, and a single-imagery relative radiation accuracy that is better than 0.51 dB. For polarimetric validation, the modified Quegan method was utilized to measure the crosstalk for quad-pol products to ensure that it was than −40 dB. Meanwhile, non-negligible channel imbalance errors were found in the QPSII and WAV modes, and they were effectively well-calibrated with strip estimators to satisfy the system design.

Additive noise results from the thermal noise of the radar receiver or antenna, and often has an adverse effect on the subsequent applications. To weaken the influence of additive noise, it is crucial to know the actual additive noise level. However, the system noise level is not always provided in some single- or full-polarimetric synthetic aperture radar (PolSAR) products. As one of the typical low backscattering objects (LBOs) in PolSAR images, shadow occurs as soon as the depression angle of the synthetic aperture radar (SAR) system reaches a more value than the slope away from the radar illumination, and thus provides a feasible way to measure additive noise. This paper proposes a framework to automatically extract shadow regions by a trained model using the bag of words (BoW) model with data from different scenes. The additive noise can then be estimated across a large area based on the extracted shadow. The experiments based on single- and full-polarimetric Radarsat-2 data suggest that the shadow-based framework is an effective way to estimate additive noise.

Nowadays, non-corner reflectors (CRs) calibration techniques are attractive to relieve the workload of polarimetric calibration. Yet, it is challenging to derive the complex co-pol channel imbalance (CCI) precisely and conveniently when CRs are unavailable. Our previous research provided the general unitary zero helix (gUZH) and phase-optimized UZH (pUZH) methods to estimate CCI by the bare soil pixels. However, the amplitude is still overestimated compared with CRs. Thus, this paper proposes to optimize the goal function by L2 normalization and derive the amplitude-optimized UZH (aUZH) to estimate the CCI amplitude robustly. The new aUZH performs well in resisting errors from improper reference picking. We also develop a signal-to-noise ratio (SNR) filter that selects the soil pixels with high SNR into aUZH to reduce the influence of the noise floor. Furthermore, we combine aUZH and the SNR filter to develop a method, i.e., HybridC, to process the massive data for a more precise solution. This paper validates the new algorithm through the external calibration of the Gaofen-3 satellite from 2017 to 2020. The result shows that CR error in HH/VV is better than 0.26 dB after aUZH calibration. Furthermore, we process the proposed HybridC as a tool to monitor the sensor quality of the Gaofen-3 in over 40,000 images. We find that the imbalance phase exceeds the designed specification at some beams and that our algorithm can calibrate the bias precisely.

Keywords: Low Backscattering Objects, Bag of Words, SIFT features, Support Vector Machine Due to the forward scattering and block of radar signal, the water, bare soil, shadow, named low backscattering objects (LBOs), often present low backscattering intensity in polarimetric synthetic aperture radar (PolSAR) image. Because the LBOs rise similar backscattering intensity and polarimetric responses, the spectral-based classifiers are inefficient to deal with LBO classification, such as Wishart method. Although some polarimetric features had been exploited to relieve the confusion phenomenon, the backscattering features are still found unstable when the system noise floor varies in the range direction. This paper will introduce a simple but effective scene classification method based on Bag of Words (BoW) model using Support Vector Machine (SVM) to discriminate the LBOs, without relying on any polarimetric features. In the proposed approach, square windows are firstly opened around the LBOs adaptively to determine the scene images, and then the Scale-Invariant Feature Transform (SIFT) points are detected in training and test scenes. The several SIFT features detected are clustered using K-means to obtain certain cluster centers as the visual word lists and scene images are represented using word frequency. At last, the SVM is selected for training and predicting new scenes as some kind of LBOs. The proposed method is executed over two AIRSAR data sets at C band and L band, including water, bare soil and shadow scenes. The experimental results illustrate the effectiveness of the scene method in distinguishing LBOs.