Four-dimensional-printed deformable honeycombs can produce pro-programmed shape deformation and different properties under external stimuli, and the manufacturing process parameters are the dominant factors affecting the microstructure and properties of the manufactured honeycomb structures. Although many researchers have investigated the effects of manufacturing process parameters on the mechanical properties of printed materials, there is still a lack of research on the relationship between manufacturing process parameters and properties of honeycomb structures. Therefore, a novel honeycomb structures which has two configurations under temperature stimuli is proposed, and the optimum manufacturing processes for the printing of this honeycomb are selected considering the compression and energy absorption properties simultaneously. The novel honeycomb is designed and printed with fused deposition modeling technology, which have hexagonal configuration (Structure I) and semi-triangular configuration (Structure II) under external temperature stimulus. The energy absorption capacity of Structure I and compressive properties of Structure II are investigated under different manufacturing process parameters. The experimental results indicate that the layer thickness has the most significant impact on the mechanical performance of deformable honeycombs. The combination of a layer thickness of 0.2 mm, printing speed of 40 mm s−1, and 100% infill density are the best process parameters for the novel deformable honeycomb structures.
Coated structures are structures with a solid thin-walled coating enclosing substrates. Coated structures with porous substrates (infills) are often adopted in additive manufacturing to reduce the material cost and printing time, while improving robustness against local bucking, unknown loads and material deficiencies. This article presents a new density filter method for the topology optimization of coated structures. Compared to previous work, the new method uses only the density filter and its projection, and does not rely on the gradient of the density field, which can pose a numerical challenge in large-scale problems. Since the output of the proposed density filter is bounded exactly between zero and one, it will also eliminate the need to approximate the maximum magnitude of the density gradient, the inaccuracy of which can cause non-uniform thickness of the coating. The proposed filter also realizes a smoother change between substrate material and coating material, and encourages the merging and splitting of coatings during optimization. Several numerical examples on compliance minimization are presented to demonstrate the validity and effectiveness of the proposed density filter.
Rail wear inspection is vitally important in the railway industry. Conventional methods mainly use manual or static measurements to detect rail wear, which are inefficient, imprecise, and unreliable. To improve the accuracy and efficiency of rail wear inspection, a dynamic detection system based on a revised fast global registration (RFGR) algorithm was employed. First, the framework for online detection of rail wear with multi-profile was put forward to reduce the influence of vibrations of individual sections. Second, the RFGR method was proposed by using a robust weight function to convert the non-convex registration model to a convex problem, and the Levenberg–Marquardt method was used to solve nonlinear least-squares systems robustly. Finally, the Hausdorff distance was introduced to visualize the distance between the wear profile and the reference profile after alignment. The experimental results demonstrated that the RFGR algorithm was more accurate, robust, and effective than iterative closest point (ICP), sparse ICP, Yi’s sparse ICP, and the fast global registration algorithm. For actual wear detection, the proposed method was more efficient and robust for the online dynamic detection of rail wear when compared with the single-profile-section-based inspection method.
This paper presents an efficient and compact Matlab code for 2D and 3D topology optimization of multi-materials. We extend a classical 88-line-based educational code to the multi-material problem using the mapping-based interpolation function, with which each material is modeled equally and can obtain a clear 0, 1 result for each material of the optimized structures that can be manufactured easily. A solution of topology optimization of multi-materials with minimum compliance under volume constraints is documented, including the details of the optimization model, filtering, projection, and sensitivity analysis procedures. Several numerical examples are also conducted to demonstrate the effectiveness of the code, and the influence of the parameter on the optimized results is also analyzed. Complete 2D and 3D Matlab codes are provided.