The modeling and prediction of heat transfer in fractured media is particularly challenging as hydraulic and transport properties depend on a multiscale structure that is difficult to resolve. In addition to advection and dispersion, heat transfer is also impacted by thermal attenuation and lag time, which results from fracture‐matrix thermal exchanges. Here we derive analytical expressions for thermal lag time and attenuation coefficient in fractured media, which quantify the effect of fracture geometry on these key factors. We use the developed expressions to interpret the results of single‐well thermal and solute tracer tests performed in a crystalline rock aquifer at the experimental site of Ploemeur (H+ observatory network). Thermal breakthrough was monitored with fiber‐optic distributed temperature sensing (FO‐DTS), which allows temperature monitoring at high spatial and temporal resolution. The observed thermal response departs from the conventional parallel plate fracture model but is consistent with a channel model representing highly channelized fracture flow. These findings, which point to a strong reduction of fracture‐matrix exchange by flow channeling, show the impact of fracture geometry on heat recovery in geothermal systems. This study also highlights the advantages to conduct both thermal and solute tracer tests to infer fracture aperture and geometry.

Transport in fractured media plays an important role in a range of processes, from rock weathering and microbial processes to contaminant transport, and energy extraction and storage. Diffusive transfer between the fracture fluid and the rock matrix is often a key element in these applications. But the multiscale heterogeneity of fractures renders the field assessment of these processes extremely challenging. This study explores the use of dissolved gases as tracers of fracture‐matrix interactions, which can be measured continuously and highly accurately using mobile mass spectrometers. Since their diffusion coefficients vary significantly, multiple gases are used to probe different scales of fracture‐matrix exchanges. Tracer tests with helium, xenon, and argon were performed in a fractured chalk aquifer, and resulting tracer breakthrough curves are modeled. Results show that continuous dissolved gas tracing with multiple tracers provides key constrains on fracture‐matrix interactions and reveal unexpected scale effects in fracture‐matrix exchange rates.

Experimental characterization of thermal transport in fractured media through thermal tracer tests is crucial for environmental and industrial applications such as the prediction of geothermal system efficiency. However, such experiments have been poorly achieved in fractured rock due to the low permeability and complexity of these media. We have thus little knowledge about the effect of flow configuration on thermal recovery during thermal tracer tests in such systems. We present here the experimental set up and results of several single-well thermal tracer tests for different flow configurations, from fully convergent to perfect dipole, achieved in a fractured crystalline rock aquifer at the experimental site of Plœmeur (H+ observatory network). The monitoring of temperature using Fiber-Optic Distributed Temperature Sensing (FO-DTS) associated with appropriate data processing allowed to properly highlight the heat inflow in the borehole and to estimate temperature breakthroughs for the different tests. Results show that thermal recovery is mainly controlled by advection processes in convergent flow configuration while in perfect dipole flow field, thermal exchanges with the rock matrix are more important, inducing lower thermal recovery.