Petroleum hydrocarbons represent the most frequent environmental contaminant. The introduction of petroleum hydrocarbons into a pristine environment immediately changes the nature of that environment, resulting in reduced ecosystem functionality. Natural attenuation represents the single, most important biological process which removes petroleum hydrocarbons from the environment. It is a process where microorganisms present at the site degrade the organic contaminants without the input of external bioremediation enhancers (i.e., electron donors, electron acceptors, other microorganisms or nutrients). So successful is this natural attenuation process that in environmental biotechnology, bioremediation has developed steadily over the past 50 years based on this natural biodegradation process. Bioremediation is recognized as the most environmentally friendly remediation approach for the removal of petroleum hydrocarbons from an environment as it does not require intensive chemical, mechanical, and costly interventions. However, it is under-utilized as a commercial remediation strategy due to incomplete hydrocarbon catabolism and lengthy remediation times when compared with rival technologies. This review aims to describe the fate of petroleum hydrocarbons in the environment and discuss their interactions with abiotic and biotic components of the environment under both aerobic and anaerobic conditions. Furthermore, the mechanisms for dealing with petroleum hydrocarbon contamination in the environment will be examined. When petroleum hydrocarbons contaminate land, they start to interact with its surrounding, including physical (dispersion), physiochemical (evaporation, dissolution, sorption), chemical (photo-oxidation, auto-oxidation), and biological (plant and microbial catabolism of hydrocarbons) interactions. As microorganism (including bacteria and fungi) play an important role in the degradation of petroleum hydrocarbons, investigations into the microbial communities within contaminated soils is essential for any bioremediation project. This review highlights the fate of petroleum hydrocarbons in tertial environments, as well as the contributions of different microbial consortia for optimum petroleum hydrocarbon bioremediation potential. The impact of high-throughput metagenomic sequencing in determining the underlying degradation mechanisms is also discussed. This knowledge will aid the development of more efficient, cost-effective commercial bioremediation technologies.

We examined the rate of degradation of a benzene–toluene mixture in aerobic microcosms prepared with samples of an aquifer that lies below a petrochemical plant (SIReN, UK). Five samples exposed to different concentrations of benzene (from 0.6 to 317 mg l⁻¹) were used. Fast degradation (approx. 1–6 mg l⁻¹ day⁻¹) of both contaminants was observed in all groundwater samples and complete degradation was recorded by the seventh day except for one sample. We also identified the microbial community in each of the samples by culture-independent techniques. Two of the less impacted samples harbour the aerobic benzene degrader Pseudomonas fluorescens, while Acidovorax and Arthrobacter spp. were found in the most polluted sample and are consistent with the population observed in situ. Hydrogenophaga was found in the deepest sample while Rhodoferax spp. were recovered in an alkaline sample (pH 8.4) and may also be implicated in benzene degradation. Time series analysis shows that each of the samples has a different community but they remain stable over the degradation period. This study provides new information on a well not previously studied (no. 309s) and confirms that adapted communities have the ability to degrade hydrocarbon mixtures and could be used in further bioaugmentation approaches in contaminated sites.