The main objective is to investigate an effect of anisotropic distribution of the reinforcing particles in a cubic representative volume element (RVE) of the carbon–polymer composite including stochastic interphases on its homogenized elastic characteristics. This is done using a probabilistic homogenization technique implemented using a triple approach based on the stochastic perturbation method, Monte Carlo simulation as well as on the semi-analytical approach. On the other hand, the finite element method solution to the uniform deformations of this RVE is carried out in the system ABAQUS. This composite model consists of two neighboring scales–the micro-contact scale relevant to the imperfect interface and the micro-scale—having 27 particles inside a cubic volume of the polymeric matrix. Stochastic interface defects in the form of semi-spheres with Gaussian radius are replaced with the interphase having probabilistically averaged elastic properties, and then such a three-component composite is subjected to computational homogenization on the microscale. The computational experiments described here include FEM error analysis, sensitivity assessment, deterministic results as well as the basic probabilistic moments and coefficients (expectations, deviations, skewness and kurtosis) of all the components of the effective elasticity tensor. They also include quantification of anisotropy of this stiffness tensor using the Zener, Chung–Buessem and the universal anisotropy indexes. A new tensor anisotropy index is proposed that quantifies anisotropy on the basis of all not null tensor coefficients and remains effective also for tensors other than cubic (orthotropic, triclinic and also monoclinic). Some comparison with previous analyses concerning the isotropic case is also included to demonstrate the anisotropy effect as well as the numerical effort to study randomness in composites with anisotropic distribution of reinforcements and inclusions.
This paper proposes the framework for reliability-based design optimization (RBDO) of structural elements with an example based on the corrugated web I-girder. It tackles the problem of topological optimization of corroding structures with uncertainties. Engineering restrictions follow a concept of the limit states (LS) and extend it for stability and eigenfrequency assessment. The reliability constraints include all the LS; they are computed according to first- and second-order reliability methods. The RBDO example minimizes the bridge girder cross-section while satisfying the structural reliability level for the ultimate and the serviceability limit states, stability, and eigenfrequency. It takes into consideration two uncorrelated random effects, i.e., manufacturing imperfection and corrosion. They are both Gaussian; the first of them is applied at assembly time, while the second is applied according to the time series. The example confronts three independent FEM models with an increasing level of detailing, and compares RBDO results for three concurrent probabilistic methods, i.e., the iterative stochastic perturbation technique (ISPT), the semi-analytical method, and the Monte Carlo simulation. This study proves that the RBDO analysis is feasible even for computationally demanding structures, can support automation of structural design, and that the level of detailing in the FEM models influences its results. Finally, it exemplifies that reliability restrictions for LS are much more rigorous than for their deterministic counterparts, and that the fastest ISPT method is sufficiently accurate for probabilistic calculations in this RBDO.
1 June 2021 in International Journal of Applied Mechanics and Engineering
The main aim of this work is a computational nonlinear analysis of a high strength steel corrugated-web plate girder with a very detailed and realistic mesh including vertical ribs, all the fillet welds and supporting areas. The analysis is carried out to verify mechanical structural response under transient fire temperature conditions accounting for an efficiency and accuracy of three various transient coupled thermo-elastic models. All the resulting stress distributions, deformation modes and their time variations, critical loads and eigenfrequencies as well as failure times are compared in all these models. Nonlinearities include material, geometrical and contact phenomena up to the temperature fluctuations together with temperature-dependent constitutive relations for high strength steel. They result partially from steady state and transient experimental tests or from the additional designing rules included in Eurocodes. A fire scenario includes an application of the normative fire gas temperature curve on the bottom flange of the entire girder for a period of 180 minutes. It is computed using sequentially coupled thermo-elastic Finite Element Method analyses. These account for heat conductivity, radiation and convection. The FEM model consists of a combination of 3D hexahedral and tetrahedral solid finite elements and uses temperature-dependent material and physical parameters, whose values are taken after the experiments presented in Eurocodes. Numerical results presented here demonstrate a fundamental role of the lower flange in carrying fire loads according to this scenario and show a contribution of the ribs and of the welds to the strength of the entire structure.