Biotechnological processes are typically perceived to be greener than chemical processes. A life cycle assessment (LCA) was performed to compare the chemical and biochemical synthesis of lactones obtained by Baeyer–Villiger oxidation. The LCA is prospective (based on experiments at a small scale with primary data) because the process is at an early stage. The results show that the synthesis route has no significant effect on the climate change impact [(1.65±0.59) kg gproduct−1 vs. (1.64±0.67) kg gproduct−1]. Key process performance metrics affecting the environmental impact were evaluated by performing a sensitivity analysis. Recycling of solvents and enzyme were shown to provide an advantage to the enzymatic synthesis. Additionally, the climate change impact was decreased by 71 % if renewable electricity was used. The study shows that comparative LCAs can be used to usefully support decisions at an early stage of process development.
The hydrogenation of levulinic acid (LA) to γ-valerolactone (GVL) using the η4-(2,3,4,5-tetraphenylcyclopentadienone) ruthenium tricarbonyl precursor of the well-known Shvo catalyst and H2 pressure was established under solvent-free conditions to achieve 100% conversion and 100% selectivity within 5 hours. Kinetic reaction curves were measured in order to deduce the optimal reaction conditions, which were further evaluated by means of density functional theory (DFT) calculations, and compared with catalytic concepts that consume formic acid or isopropyl alcohol as hydrogen donor. Ultimately, this alternative reaction procedure was subjected to a life cycle assessment (LCA) in comparison with the transfer hydrogenation methodologies, in order to verify its contribution towards a practice of environmentally benign chemistry.
Asymmetric catalysis is an essential tool in modern chemistry, but increasing environmental concerns demand the development of new catalysts based on cheap, abundant, and less toxic iron. As a result, Knölker-type catalysts have emerged as a promising class of iron catalysts for various chemical transformations, notably the hydrogenation of carbonyls and imines, while asymmetric versions are still under exploration to achieve optimal enantio-selectivities. In this work, we report a novel asymmetric design of a Knölker-type catalyst, in which the C2-rotational symmetric cyclopentadienone ligand possesses chiral substituents on the 2- and 5-positions near the active site. Four examples of the highly modular catalyst design were synthesized via standard organic procedures, and their structures were confirmed with NMR, IR, MS, and polarimetry analysis. Density functional theory (DFT) calculations were conducted to elucidate the spatial conformation of the catalysts, and therewith to rationalize the influence of structural alterations. Transfer- and H2-mediated hydrogenations were successfully established, leading to appreciable enantiomeric excesses (ee) values up to 70%. Amongst all reported Knölker-type catalysts, our catalyst design achieves one of the highest ee values for hydrogenation of acetophenone and related compounds.
22 November 2017 in European Journal of Inorganic Chemistry
Despite Baeyer-Villiger monooxygenases (BVMOs) gaining attention in recent years, there are few cases of their up-scaled application for lactone synthesis. A thermostable cyclohexanone monooxygenase from Thermocrispum municipale (TmCHMO) was applied to the oxidation of 3,3,5-trimethylcyclohexanone, using a glucose dehydrogenase (GDH) for co-factor regeneration. Reaction kinetics were improved by optimizing the biocatalyst loading, with investigation into oxygen limitations. Product concentration and productivity were increased by keeping the substrate concentration below inhibitory level via continuous substrate feeding (CSF). This substrate feeding strategy was evaluated against two biphasic reactions using either toluene or n-butyl acetate as immiscible organic solvents. A product concentration of 38 g L-1 and a space-time yield of 1.35 g L-1 h-1 were achieved during the gram-scale synthesis of the two regio-isomeric lactones by applying the CSF strategy. These improvements contribute to the large-scale application of BVMOs in the synthesis of branched building blocks for polymer applications.
Study of the kinetics and thermodynamics of the organocatalyzed ring opening polymerization of a regio-isomeric mixture of β,δ-trimethyl-ε-caprolactones (TMCL).