Highly soluble iodide/triiodide (I−/I3−) couples are one of the most promising redox-active species for high-energy-density electrochemical energy storage applications. However, to ensure high reversibility, only two-thirds of the iodide capacity is accessed and one-third of the iodide ions act as a complexing agent to stabilize the iodine (I2), forming I3− (I2I−). Here, we exploit bromide ions (Br−) as a complexing agent to stabilize the iodine, forming iodine–bromide ions (I2Br−), which frees up iodide ions and increases the capacity. Applying this strategy, we demonstrate a novel zinc/iodine–bromide battery to achieve an energy density of 101 W h Lposolyte+negolyte−1 (or 202 W h Lposolyte−1), which is the highest energy density achieved for aqueous flow batteries to date. This strategy can be further generalized to nonaqueous iodide-based batteries (i.e. lithium/polyiodide battery), offering new opportunities to improve high-energy iodide-based energy storage technologies.
Soft materials tend to be highly permeable to gases, making it difficult to create stretchable hermetic seals. With the integration of spacers, we demonstrate the use of liquid metals, which show both metallic and fluidic properties, as stretchable hermetic seals. Such soft seals are used in both a stretchable battery and a stretchable heat transfer system that involve volatile fluids, including water and organic fluids. The capacity retention of the battery was ~72.5% after 500 cycles, and the sealed heat transfer system showed an increased thermal conductivity of approximately 309 watts per meter-kelvin while strained and heated. Furthermore, with the incorporation of a signal transmission window, we demonstrated wireless communication through such seals. This work provides a route to create stretchable yet hermetic packaging design solutions for soft devices.
Polymer nanocomposites offer the opportunity to bridge properties of nanomaterials to the macroscale. In this work, layer-by-layer (LbL) assembly is used to demonstrate nanocomposites of 2D titanium carbide nanosheets (MXene) and clay nanoplatelets (montmorillonite) to fabricate freestanding thin films with unique multifunctional properties. These thin films can be tuned by adjusting the thickness to exhibit a tensile strength of 138 MPa–225 MPa, EMI specific shielding effectiveness normalized to thickness and density up to 24 550 dB cm2 g−1, and sheet resistance from 855 Ω sq−1–3.27 kΩ sq−1 (corresponding to a range of conductivity from 53 S m−1 to 125 S m−1). This composite is the strongest MXene-based LbL film prepared to date, in part due to the nacre-like brick-and-mortar structure. Ultra-strong, multifunctional films of this nature are desirable for many applications ranging from membranes, to structural and multifunctional composites, energy harvesting and storage, and materials for aerospace.
12 July 2019 in Angewandte Chemie International Edition