The world is experiencing an energy crisis and environmental issues due to the depletion of fossil fuels and the continuous increase in carbon dioxide concentrations. Microalgal biofuels are produced using sunlight, water, and simple salt minerals. Their high growth rate, photosynthesis, and carbon dioxide sequestration capacity make them one of the most important biorefinery platforms. Furthermore, microalgae's ability to alter their metabolism in response to environmental stresses to produce relatively high levels of high-value compounds makes them a promising alternative to fossil fuels. As a result, microalgae can significantly contribute to long-term solutions to critical global issues such as the energy crisis and climate change. The environmental benefits of algal biofuel have been demonstrated by significant reductions in carbon dioxide, nitrogen oxide, and sulfur oxide emissions. Microalgae-derived biomass has the potential to generate a wide range of commercially important high-value compounds, novel materials, and feedstock for a variety of industries, including cosmetics, food, and feed. This review evaluates the potential of using microalgal biomass to produce a variety of bioenergy carriers, including biodiesel from stored lipids, alcohols from reserved carbohydrate fermentation, and hydrogen, syngas, methane, biochar and bio-oils via anaerobic digestion, pyrolysis, and gasification. Furthermore, the potential use of microalgal biomass in carbon sequestration routes as an atmospheric carbon removal approach is being evaluated. The cost of algal biofuel production is primarily determined by culturing (77%), harvesting (12%), and lipid extraction (7.9%). As a result, the choice of microalgal species and cultivation mode (autotrophic, heterotrophic, and mixotrophic) are important factors in controlling biomass and bioenergy production, as well as fuel properties. The simultaneous production of microalgal biomass in agricultural, municipal, or industrial wastewater is a low-cost option that could significantly reduce economic and environmental costs while also providing a valuable remediation service. Microalgae have also been proposed as a viable candidate for carbon dioxide capture from the atmosphere or an industrial point source. Microalgae can sequester 1.3 kg of carbon dioxide to produce 1 kg of biomass. Using potent microalgal strains in efficient design bioreactors for carbon dioxide sequestration is thus a challenge. Microalgae can theoretically use up to 9% of light energy to capture and convert 513 tons of carbon dioxide into 280 tons of dry biomass per hectare per year in open and closed cultures. Using an integrated microalgal bio-refinery to recover high-value-added products could reduce waste and create efficient biomass processing into bioenergy. To design an efficient atmospheric carbon removal system, algal biomass cultivation should be coupled with thermochemical technologies, such as pyrolysis.

The extensive use of petroleum-based synthetic and non-biodegradable materials for packaging applications has caused severe environmental damage. The rising demand for sustainable packaging materials has encouraged scientists to explore abundant unconventional materials. For instance, cellulose, extracted from lignocellulosic biomass, has gained attention owing to its ecological and biodegradable nature. This article reviews the extraction of cellulose nanoparticles from conventional and non-conventional lignocellulosic biomass, and the preparation of cellulosic nanocomposites for food packaging. Cellulosic nanocomposites exhibit exceptional mechanical, biodegradation, optical and barrier properties, which are attributed to the nanoscale structure and the high specific surface area, of 533 m² g⁻¹, of cellulose. The mechanical properties of composites improve with the content of cellulose nanoparticles, yet an excessive amount induces agglomeration and, in turn, poor mechanical properties. Addition of cellulose nanoparticles increases tensile properties by about 42%. Barrier properties of the composites are reinforced by cellulose nanoparticles; for instance, the water vapor permeability decreased by 28% in the presence of 5 wt% cellulose nanoparticles. Moreover, 1 wt% addition of filler decreased the oxygen transmission rate by 21%. We also discuss the eco-design process, designing principles and challenges.

The development and recycling of biomass production can partly solve issues of energy, climate change, population growth, food and feed shortages, and environmental pollution. For instance, the use of seaweeds as feedstocks can reduce our reliance on fossil fuel resources, ensure the synthesis of cost-effective and eco-friendly products and biofuels, and develop sustainable biorefinery processes. Nonetheless, seaweeds use in several biorefineries is still in the infancy stage compared to terrestrial plants-based lignocellulosic biomass. Therefore, here we review seaweed biorefineries with focus on seaweed production, economical benefits, and seaweed use as feedstock for anaerobic digestion, biochar, bioplastics, crop health, food, livestock feed, pharmaceuticals and cosmetics. Globally, seaweeds could sequester between 61 and 268 megatonnes of carbon per year, with an average of 173 megatonnes. Nearly 90% of carbon is sequestered by exporting biomass to deep water, while the remaining 10% is buried in coastal sediments. 500 gigatonnes of seaweeds could replace nearly 40% of the current soy protein production. Seaweeds contain valuable bioactive molecules that could be applied as antimicrobial, antioxidant, antiviral, antifungal, anticancer, contraceptive, anti-inflammatory, anti-coagulants, and in other cosmetics and skincare products.

The Ukraine conflict has put critical pressure on gas supplies and increased the price of fertilisers. As a consequence, biogas has gained remarkable attention as a local source of both gas for energy and biofertiliser for agriculture. Moreover, climate change-related damage incentivises all sectors to decarbonise and integrate sustainable practices. For instance, anaerobic digestion allows decarbonisation and optimal waste management. Incorporating a biogas system in each country would limit global warming to 2 °C. If suitable policies mechanisms are implemented, the biogas industry could reduce global greenhouse gas emissions by 3.29–4.36 gigatonnes carbon dioxide equivalent, which represent about 10–13% of global emissions. Here, we review the role of the biogas sector in capturing methane and mitigating carbon emissions associated with biogas outputs. Since biogas impurities can cause severe practical difficulties in biogas storing and gas grid delivering systems, we present upgrading technologies that remove or consume the carbon dioxide in raw biogas, to achieve a minimum of 95% methane content. We discuss the role of hydrogen-assisted biological biogas upgrading in carbon sequestration by converting carbon dioxide to biomethane via utilising hydrogen generated primarily through other renewable energy sources such as water electrolysis and photovoltaic solar facilities or wind turbines. This conceptual shift of 'power to gas' allows storing and utilising the excess of energy generated in grids. By converting carbon dioxide produced during anaerobic digestion into additional biomethane, biogas has the potential to meet 53% of the demand for fossil natural gas. We also evaluate the role of digestate from biogas systems in producing biochar, which can be used directly as a biofertiliser or indirectly as a biomethanation enhancement, upgrading, and cleaning material.

Herein, activated carbon (AC) and carbon nanotubes (CNTs) were synthesised from potato peel waste (PPW). Different ACs were synthesised via two activation steps: firstly, with phosphoric acid (designated PP) and then using potassium hydroxide (designated PK). The AC produced after the two activation steps showed a surface area as high as 833 m² g⁻¹ with a pore volume of 0.44 cm³ g⁻¹, where the raw material of PPW showed a surface area < 4 m² g⁻¹. This can help aid and facilitate the concept of the circular economy by effectively up-cycling and valorising waste lignocellulosic biomass such as potato peel waste to high surface area AC and subsequently, multi-walled carbon nanotubes (MWCNTs). Consequently, MWCNTs were prepared from the produced AC by mixing it with the nitrogen-based material melamine and iron precursor, iron (III) oxalate hexahydrate. This produced hydrophilic multi-wall carbon nanotubes (MWCNTs) with a water contact angle of θ = 14.97 °. Both AC and CNT materials were used in heavy metal removal (HMR) where the maximum lead absorption was observed for sample PK with a 84% removal capacity after the first hour of testing. This result signifies that the synthesis of these up-cycled materials can have applications in areas such as wastewater treatment or other conventional AC/CNT end uses with a rapid cycle time in a two-fold approach to improve the eco-friendly synthesis of such value-added products and the circular economy from a significant waste stream, i.e., PPW.