Wireless sensor networks are appealing to researchers due to their wide range of application potential in areas such as target detection and tracking, environmental monitoring, industrial process monitoring, and tactical systems. However, low sensing ranges result in dense networks and thus it becomes necessary to achieve an efficient medium-access protocol subject to power constraints. Various medium-access control (MAC) protocols with different objectives have been proposed for wireless sensor networks. In this article, we first outline the sensor network properties that are crucial for the design of MAC layer protocols. Then, we describe several MAC protocols proposed for sensor networks, emphasizing their strengths and weaknesses. Finally, we point out open research issues with regard to MAC layer design.

For successful data delivery, the destination nodes should be listening to the medium to receive data when the sender node starts data communication. To achieve this synchronization, there are different rendezvous schemes, among which the most energy-efficient is utilizing wakeup receivers. Current hardware technologies of wake-up receivers enable us to evaluate them as a promising solution for wireless sensor networks. In this article the benefits achieved with wake-up receivers are investigated along with the challenges observed. In addition, an overview of state-of-the-art hardware and networking protocol proposals is presented. As wake-up receivers offer new opportunities, new potential application areas are also presented and discussed.

Duty-cycled Medium Access Control (MAC) protocols certainly improve the energy efficiency of wireless networks. However, most of these protocols still suffer from severe degrees of overhearing and idle listening. These two issues prevent optimum energy usage, a crucial aspect in energy-constrained wireless networks such as wireless sensor networks (WSNs). Wake-up radio (WuR) systems drastically reduce these problems by completely switching off the nodes' microcontroller unit (MCU) and main radio transceiver until a secondary, extremely low-power receiver is triggered by a particular wireless transmission, the so called wake-up call. Unfortunately, most WuR studies focus on theoretical platforms and/or custom-built simulators. Both these factors reduce the associated usefulness of the obtained results. In this paper, we model and simulate a real, recent, and promising WuR hardware platform developed by the authors. The simulation model uses time and energy consumption values obtained in the laboratory and does not rely on custom-built simulation engines, but rather on the OMNET++ simulator. The performance of the WuR platform is compared to four of the most well-known and widely employed MAC protocols for WSN under three real-world network deployments. The paper demonstrates how the use of our WuR platform presents numerous benefits in several areas, from energy efficiency and latency to packet delivery ratio and applicability, and provides the essential information for serious consideration of switching duty-cycled MAC-based networks to WuR.

This survey paper focuses on modulation aspects of molecular communication, an emerging field focused on building biologically-inspired systems that embed data within chemical signals. The primary challenges in designing these systems are how to encode and modulate information onto chemical signals, and how to design a receiver that can detect and decode the information from the corrupted chemical signal observed at the destination. In this paper, we focus on modulation design for molecular communication via diffusion systems. In these systems, chemical signals are transported using diffusion, possibly assisted by flow, from the transmitter to the receiver. This tutorial presents recent advancements in modulation and demodulation schemes for molecular communication via diffusion. We compare five different modulation types: concentration-based, type-based, timing-based, spatial, and higher-order modulation techniques. The end-to-end system designs for each modulation scheme are presented. In addition, the key metrics used in the literature to evaluate the performance of these techniques are also presented. Finally, we provide a numerical bit error rate comparison of prominent modulation techniques using analytical models. We close the tutorial with a discussion of key open issues and future research directions for design of molecular communication via diffusion systems.

CoAP is a lightweight RESTful application layer protocol devised for the IoT. Operating on top of UDP, CoAP must handle congestion control by itself. The core CoAP specification defines a basic congestion control mechanism, but it is not capable of adapting to network conditions. However, IoT scenarios exhibit significant resource constraints, which pose new challenges on the design of congestion control mechanisms. In this article we present CoCoA, an advanced congestion control mechanism for CoAP being standardized by the Internet Engineering Task Force CoRE working group. CoCoA introduces a novel round-trip time estimation technique, together with a variable backoff factor and aging mechanisms in order to provide dynamic and controlled retransmission timeout adaptation suitable for the peculiarities of IoT communications. We conduct a comparative performance analysis of CoCoA and a variety of alternative algorithms including state-of-the-art mechanisms developed for TCP. The study is based on experiments carried out in real testbeds. Results show that, in contrast to the alternative methods considered, CoCoA consistently outperforms the default CoAP congestion control mechanism in all evaluated scenarios.

This article presents a converged 5G network infrastructure and an overarching architecture to jointly support operational network and end-user services, proposed by the EU 5G PPP project 5G-XHaul. The 5G-XHaul infrastructure adopts a common fronthaul/backhaul network solution, deploying a wealth of wireless technologies and a hybrid active/passive optical transport, supporting flexible fronthaul split options. This infrastructure is evaluated through a novel modeling. Numerical results indicate significant energy savings at the expense of increased end-user service delay.