Generally, thin-film metal glass (TFMG) is deposited using two or more elemental targets. Thus, achievement of a homogeneous coating during mass production is difficult. As a new method of TFMG deposition, a single target with high glass-forming ability (GFA) has been used to improve the sputtering process, facilitating easy processing and broad application of sputtering targets. In this study, three kinds of targets (i.e., cast, amorphous, and crystalline targets) are prepared via casting and powder processes. The thermal and mechanical properties of the three targets prepared using the various methods are investigated, and the crystalline target is found to be the most thermodynamically and mechanically stable of the three alternatives. In addition, for TFMG deposited using the microcrystalline target, excellent compositional uniformity between the target and coating is achieved. Therefore, this study experimentally demonstrates that a fine crystalline target is most suitable for use as a multi-component single target in GFA manufacturing methods. These findings are expected to facilitate commercial use of TFMGs.
Recently, research has been conducted on nanocomposite thin films containing new additive elements in ZrN. In this paper, a method for depositing ZrCuSiN nanocomposite coatings using a ZrCuSi single target is presented. The ZrCuSi target that was used to easily deposit a ZrCuSiN coating in a mixed gas atmosphere (Ar + N2) was produced by a simple arc melting method (casting process). The effect of the nitrogen content was investigated by depositing a ZrCuSiN coating using alloy targets at various nitrogen gas flow rates (2, 4, 6, and 8 sccm). X-ray diffraction analysis of the ZrCuSiN coatings revealed a ZrN structure with a preferable orientation (200). As the nitrogen flow rate increased, the formation of o-Zr3N4 was dominant in the ZrN formation. A nitrogen gas flow rate of 4 sccm produced a coating with optimal ZrN and a-Si3N4 coordination and maximum hardness (41 GPa). Reciprocal friction tests of all coatings and uncoated carburized SCM415 steel in a 5W30 lubrication atmosphere demonstrated that the 4 sccm coating had the lowest friction coefficient (0.002). Therefore, our method has the potential to be an alternative surface coating technique for materials used in automotive engine parts and various other wear protection applications.
With the growth of the automobile, machinery, and aerospace industries, demand for high-performance surface coatings having multifunctional characteristics for use in mechanical parts is increasing. In this study, ternary/quaternary Mo–Cu–Cr–(N) nanocomposite coatings were deposited at different N2 gas flow rates using direct current magnetron sputtering from a multicomponent single-alloy target. The use of a single-alloy target simplifies the deposition process and improves the coating uniformity. The influence of the nitrogen content was investigated regarding the microstructural, mechanical, and tribological properties, and corrosion resistance of these coatings. The Mo–Cu–Cr–N coating containing 30.5 at.% nitrogen showed a nanocomposite structure comprising transition metal nitride phases (Mo–N/Cr–N) having high mechanical properties and corrosion resistance, while retaining the excellent tribological properties of ternary Mo–Cu–N coatings.