In this paper, a novel fiber-optic sensing system based on fiber Bragg gratings (FBGs) to measure foot plantar pressure is proposed. This study first explores the Pedar-X insole foot pressure types of the adult-size chart and then defines six measurement areas to effectively identify four foot types: neutral foot, cavus foot, supinated foot and flat foot. The plantar pressure signals are detected by only six FBGs, which are embedded in silicone rubber. The performance of the fiber optic sensing is examined and compared with a digital pressure plate of i-Step P1000 with 1024 barometric sensors. In the experiment, there are 11 participants with different foot types to participate in the test. The Pearson correlation coefficient, which is determined from the measured results of the homemade fiber-optic plantar pressure system and i-Step P1000 plantar pressure plate, reaches up to 0.671 (p < 0.01). According to the measured results from the plantar pressure data, the proposed fiber optic sensing system can successfully identify the four different foot types. Measurements of this study have demonstrated the feasibility of the proposed system so that it can be an alternative for plantar pressure detection systems.
A transparent reconfigurable optical add-drop multiplexer (ROADM) based on arrayed-waveguide gratings (AWGs) and tunable fiber Bragg gratings (FBGs) is presented in this paper. The Bragg wavelength of the FBG could be tuned within the free spectral range of the AWG to implement reconfigurable add-drop function without interfering the other wavelength channels. An experiment was demonstrated to verify the add-drop function and to evaluate the performance of the proposed ROADM. Proposed novel ROADM is flexible and scalable for the dense wavelength division multiplexing network.
25 July 2008 in Microwave and Optical Technology Letters
In this paper, a new type of optical fiber tilt sensor based on fiber Bragg grating (FBG) is presented for 2D dual-axis tilt angle sensing. The tilt sensor is composed of two cylindrical floats suspended in water, connected with FBG. When the external environment causes the tilting of the sensor, the surface of the liquid within the container will form a new balanced liquid surface plane due to the gravity and change the height of the liquid at different locations in the container. So the buoyancy force of the cylindrical floats of the sensor will vary with the depth of liquid, thus the changed FBG strain will cause the FBG reflection central wavelength shift. According to the measured central wavelength shift by the optical spectral analyzer (OSA), we can obtain the two-axis tilt angle of the sensor. The proposed sensor can detect a tilt angle range of −5 degrees to +5 degrees and achieve a sensitivity of 0.1° with optical spectrum analyzer resolution of 0.01 nm. Due to its good sensing linearity, the proposed sensor can be applied in building tilt measurement.