We investigated the capabilities of a canopy height model (CHM) derived from aerial photographs using the Structure from Motion (SfM) approach to estimate aboveground biomass (AGB) in a tropical forest. Aerial photographs and airborne Light Detection and Ranging (LiDAR) data were simultaneously acquired under leaf-on canopy conditions. A 3D point cloud was generated from aerial photographs using the SfM approach and converted to a digital surface model (DSM_P). We also created a DSM from airborne LiDAR data (DSM_L). From each of DSM_P and DSM_L, we constructed digital terrain models (DTM), which are DTM_P and DTM_L, respectively. We created four CHMs, which were calculated from (1) DSM_P and DTM_P (CHM_PP); (2) DSM_P and DTM_L (CHM_PL); (3) DSM_L and DTM_P (CHM_LP); and (4) DSM_L and DTM_L (CHM_LL). Then, we estimated AGB using these CHMs. The model using CHM_LL yielded the highest accuracy in four CHMs (R² = 0.94) and was comparable to the model using CHM_PL (R² = 0.93). The model using CHM_PP yielded the lowest accuracy (R² = 0.79). In conclusion, AGB can be estimated from CHM derived from aerial photographs using the SfM approach in the tropics. However, to accurately estimate AGB, we need a more accurate DTM than the DTM derived from aerial photographs using the SfM approach.

The accurate and timely detection of forest disturbances can provide valuable information for effective forest management. Combining dense time series observations from optical and synthetic aperture radar satellites has the potential to improve large-area forest monitoring. For various disturbances, machine learning algorithms might accurately characterize forest changes. However, there is limited knowledge especially on the use of machine learning algorithms to detect forest disturbances through hybrid approaches that combine different data sources. This study investigated the use of dense Landsat 8 and Sentinel-1 time series data for detecting disturbances in tropical seasonal forests based on a machine learning algorithm. The random forest algorithm was used to predict the disturbance probability of each Landsat 8 and Sentinel-1 observation using variables derived from a harmonic regression model, which characterized seasonality and disturbance-related changes. The time series disturbance probabilities of both sensors were then combined to detect forest disturbances in each pixel. The results showed that the combination of Landsat 8 and Sentinel-1 achieved an overall accuracy of 83.6% for disturbance detection, which was higher than the disturbance detection using only Landsat 8 (78.3%) or Sentinel-1 (75.5%). Additionally, more timely disturbance detection was achieved by combining Landsat 8 and Sentinel-1. Small-scale disturbances caused by logging led to large omissions of disturbances; however, other disturbances were detected with relatively high accuracy. Although disturbance detection using only Sentinel-1 data had low accuracy in this study, the combination with Landsat 8 data improved the accuracy of detection, indicating the value of dense Landsat 8 and Sentinel-1 time series data for timely and accurate disturbance detection.

Here, we investigated the capabilities of a lightweight unmanned aerial vehicle (UAV) photogrammetric point cloud for estimating forest biophysical properties in managed temperate coniferous forests in Japan, and the importance of spectral information for the estimation. We estimated four biophysical properties: stand volume (V), Lorey’s mean height (H_L), mean height (H_A), and max height (H_M). We developed three independent variable sets, which included a height variable, a spectral variable, and a combined height and spectral variable. The addition of a dominant tree type to the above data sets was also tested. The model including a height variable and dominant tree type was the best for all biophysical property estimations. The root-mean-square errors (RMSEs) for the best model for V, H_L, H_A, and H_M, were 118.30, 1.13, 1.24, and 1.24, respectively. The model including a height variable alone yielded the second highest accuracy. The respective RMSEs were 131.74, 1.21, 1.31, and 1.32. The model including a spectral variable alone yielded much lower estimation accuracy than that including a height variable. Thus, a lightweight UAV photogrammetric point cloud could accurately estimate forest biophysical properties, and a spectral variable was not necessarily required for the estimation. The dominant tree type improved estimation accuracy.

In 2016, in response to forest loss, the Myanmar government banned logging operations for 1 year throughout the entire country and for 10 years in specific regions. However, it is unclear whether this measure will effectively reduce forest loss, because disturbance agents other than logging may have substantial effects on forest loss. In this study, we investigated an approach to attribute disturbance agents to forest loss, and we characterized the attribution of disturbance agents, as well as the areas affected by these agents, in tropical seasonal forests in the Bago Mountains, Myanmar. A trajectory-based analysis using a Landsat time series was performed to detect change pixels. After the aggregation process that grouped adjacent change pixels in the same year as patches, a change attribution was implemented using the spectral, geometric, and topographic information of each patch via random forest modeling. The attributed agents of change include “logging”, “plantation”, “shifting cultivation”, “urban expansion”, “water invasion”, “recovery”, “other change”, and “no change”. The overall accuracy of the attribution model at the patch and area levels was 84.7% and 96.0%, respectively. The estimated disturbance area from the attribution model accounted for 10.0% of the study area. The largest disturbance agent was found to be logging (59.8%), followed by water invasion (14.6%). This approach quantifies disturbance agents at both spatial and temporal scales in tropical seasonal forests, where limited information is available for forest management, thereby providing crucial information for assessing forest conditions in such environments.

In this study, we test and demonstrate the utility of disturbance and recovery information derived from annual Landsat time series to predict current forest vertical structure (as compared to the more common approaches, that consider a sample of airborne Lidar and single-date Landsat derived variables). Mean Canopy Height (MCH) was estimated separately using single date, time series, and the combination of single date and time series variables in multiple regression and random forest (RF) models. The combination of single date and time series variables, which integrate disturbance history over the entire time series, overall provided better MCH prediction than using either of the two sets of variables separately. In general, the RF models resulted in improved performance in all estimates over those using multiple regression. The lowest validation error was obtained using Landsat time series variables in a RF model (R² = 0.75 and RMSE = 2.81 m). Combining single date and time series data was more effective when the RF model was used (opposed to multiple regression). The RMSE for RF mean canopy height prediction was reduced by 13.5% when combining the two sets of variables as compared to the 3.6% RMSE decline presented by multiple regression. This study demonstrates the value of airborne Lidar and long term Landsat observations to generate estimates of forest canopy height using the random forest algorithm.