Omar Rodríguez-Álvarez

Ms. Omar Rodríguez-Álvarez


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 October 2019 in Electronics
Verified
Journal Article
Open access
PDF file
CTCristian Del Toro
Cristian Del Toro
CRCarlos Robles-Algarín
Carlos Robles-Algarín
OROmar Rodríguez-Álvarez
Omar Rodríguez-Álvarez
This paper presents the design and construction of a robotic arm that plays chess against a human opponent, based on an artificial vision system. The mechanical design was an adaptation of the robotic arm proposed by the rapid prototyping laboratory FabLab RUC (Fabrication Laboratory of the University of Roskilde). Using the software Solidworks, a gripper with 4 joints was designed. An artificial vision system was developed for detecting the corners of the squares on a chessboard and performing image segmentation. Then, an image recognition model was trained using convolutional neural networks to detect the movements of pieces on the board. An image-based visual servoing system was designed using the Kanade–Lucas–Tomasi method, in order to locate the manipulator. Additionally, an Arduino development board was programmed to control and receive information from the robotic arm using Gcode commands. Results show that with the Stockfish chess game engine, the system is able to make game decisions and manipulate the pieces on the board. In this way, it was possible to implement a didactic robotic arm as a relevant application in data processing and decision-making for programmable automatons.

1 December 2018 in Data in Brief
Verified
Journal Article
Open access
CRCarlos Robles-Algarín
Carlos Robles-Algarín
OROmar Rodríguez-Álvarez
Omar Rodríguez-Álvarez
AOAdalberto Ospino
Adalberto Ospino
This article presents the data of a PV system using fuzzy logic and the perturb and observe (P&O) algorithm, under sudden changes in the solar irradiance and the operating temperature of a PV module. The mathematical modeling of the PV module, the dc-dc converter and the fuzzy and P&O controllers were discussed in our previous work entitled "Fuzzy logic based MPPT controller for a PV System" (Algarín et al., 2017) [1]. Data are presented for six cases with different operating conditions: in the first case the two controllers were evaluated for standard test conditions with constant solar irradiance of 1000 W/m2 and constant temperature of 25 °C. In the remaining five cases sudden increases and decreases were made in the operating conditions of the PV module. Finally, the theoretical data of the PV system are presented, which can be used as a reference to analyze the data obtained with the two controllers in the six cases. Data are provided in Supplementary material in Tables 1-7.

25 December 2025 in Technologies
Verified
Journal Article
Open access
PDF file
APAura Polo
Aura Polo
MCMario Jose Callejas Cabarcas
Mario Jose Callejas Cabarcas
LSLácides Antonio Ripoll Solano
Lácides Antonio Ripoll Solano
CRCarlos Robles-Algarín
Carlos Robles-Algarín
OROmar Rodríguez-Álvarez
Omar Rodríguez-Álvarez
This paper presents the development and cloud deployment of a system for the segmentation of electromyographic (EMG) signals oriented toward muscle fatigue monitoring in the biceps and triceps. A dataset of 30 subjects was used, resulting in 120 EMG and gyroscope files containing between four and six strength exercise series each. After a quality assessment, approximately 80% of the signals (95 files) were classified as level 1 or 2 and considered suitable for segmentation and subsequent analysis. A near real-time segmentation algorithm was designed based on signal envelopes, sliding windows, and quantile thresholds, complemented with discrete wavelet transform (DWT) filtering. Using EMG alone, segmentation accuracy reached 83% for biceps and 54% for triceps; after incorporating DWT preprocessing, accuracy increased to 87.5% and 71%, respectively. By exploiting the gyroscope’s X-axis signal as a low-noise reference, the optimal configuration achieved an overall accuracy of 80%, with 83.3% for biceps and 76.2% for triceps. The prototype was deployed on Amazon Web Services (AWS) using EC2 instances and SQS queues, and its computational cost was evaluated across four server types. On a t2.micro instance, the maximum memory usage was approximately 219 MB with a dedicated CPU and a maximum processing time of 0.98 s per signal, demonstrating the feasibility of near real-time operation under conditions with limited resources.