This paper proposes a communication protocol for Unmanned Aerial Vehicles (UAVs) using ZigBee technology. A review of the state-of-the-art of Flying Ad-hoc Networks (FANETs) and its main respective technologies is presented in detail. A comparison among Long Term Evaluation (LTE), WiFi, and ZigBee is performed, thus showing that ZigBee stands out as a good alternative to scenarios without proper infrastructure. A Raspberry Pi 3 Model B board associated with module XBEE PRO S3B 915 MHz is embedded in a UAV model DJI Phantom 3 Standard to carry out the tests. The obtained results show that the adopted protocol is capable of sending and receiving images between the UAV and the ground station. Tests are also performed using a flying aircraft, where it is demonstrated that the transmission is successfully executed for all cases and the communication protocol operates accurately. In addition, a brief analysis of the time interval required by the process is presented, as there are no significant differences among the existing scenarios.
This paper presents a communication network for a squadron of unmanned aerial vehicles (UAVs) to be used in the scanning rocket impact area for Barreira do Inferno Launch Center—CLBI (Rio Grande do Norte, Brazil), aiming at detecting intruder boats. The main features of communication networks associated with multi-UAV systems are presented. This system sends information through Wireless Sensor Networks (WSN). After comparing and analyzing area scanning strategies, it presents the specification of a data communication network architecture for a squadron of UAVs within a sensor network using XBee Pro 900HP S3B modules. A brief description is made about the initial information from the construction of the system. The embedded hardware and the design procedure of a dedicated communication antenna to the XBee modules are presented. In order to evaluate the performance of the proposed architecture in terms of robustness and reliability, a set of experimental tests in different communication scenarios is carried out. Network management software is employed to measure the throughput, packet loss and other performance indicators in the communication links between the different network nodes. Experimental results allow verifying the quality and performance of the network nodes, as well as the reliability of the communication links, assessing signal received quality, range and latency.
The planning of safe paths is an important issue for autonomous robot systems. The Probabilistic Foam method (PFM) is a planner that guarantees safe paths bounded by a sequence of structures called bubbles that provides safe regions. This method performs the planning by covering the free configuration space with bubbles, an approach analogous to a breadth-first search. To improve the propagation process and keep the safety, we present three algorithms based on Probabilistic Foam: Goal-biased Probabilistic Foam (GBPF), Radius-biased Probabilistic Foam (RBPF), and Heuristic-guided Probabilistic Foam (HPF); the last two are proposed in this work. The variant GBPF is fast, HPF finds short paths, and RBPF finds high-clearance paths. Some simulations were performed using four different maps to analyze the behavior and performance of the methods. Besides, the safety was analyzed considering the new propagation strategies.
The client-server architecture makes it necessary to implement techniques to overcome the single point of failure problem (only one server node). One of the most commonly used techniques is load balancing. Load balancing consists in distributing requests between nodes that provide a service (clusters). In this paper, we performed an evaluation based on the concept of efficiency included in ISO25010:2011. The balancers evaluated were HAProxy (High Availability Proxy) and ARR (Application Request Routing) with and without caching. The project requirements are limited using the IIS (Internet Information Services) web server. Load Balances based on caching presented the best performance in most scenarios, while HAProxy obtained better values related to CPU utilization.
Desde os antigos Jogos de Guerra em tabuleiro aos modernos exercícios digitalizados, as simulações se confundem com a história militar. Representam uma imprescindível ferramenta para o preparo da tropa e para antecipação de qual o resultado do emprego dela num eventual conflito. Com a profunda transformação ocorrida partir dos anos 1980, decorrente da digitalização de produtos, passou-se a categorizar as simulações militares em: construtiva, virtual e viva. Esta pesquisa exploratória apresenta através de visitas técnicas e revisão literária o Estado da Art e dos serious games em cada uma destas categorias, detalhando as tecnologias empregadas pelas Forças Armadas para simulações em terra, ar e mar. Através do levantamento realizando ainda aponta-se a Realidade Mista é a principal tendência tecnológica emergindo neste cenário.
Este trabalho apresenta uma proposta para um sistema multi-VANT(Veículo Aéreo Não Tripulado) para monitoramento de área de proteção ambiental. Para tal é feita uma especificação de uma arquitetura de comunicação para os componentes de rede, escolha de uma tecnologia para troca de dados e uma breve apresentação do sistema de visão computacional. Como resultado preliminar foi realizada uma comparação entre os módulos XBee S1 e S3 para definir qual será embarcado nas aeronaves.