ANIL KUMAR BODUKURI

Dr. ANIL KUMAR BODUKURI


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2016 in Perspectives in Science
Verified
Journal Article
Open access
ABANIL KUMAR BODUKURI
ANIL KUMAR BODUKURI
KEK. Eswaraiah
K. Eswaraiah
KRKatla Rajendar
Katla Rajendar
VSV. Sampath
V. Sampath
SummaryThe applications of metal matrix composites are increasing day by day due to high strength to weight ratio. In the present work Al–SiC–B4C metal matrix composite is prepared from sintering of mechanically alloyed powder (ball milling) in powder metallurgy processes. Three different combinations of compositions in volume fraction were chosen namely 90%Al 8%SiC 2%B4C, 90%Al 5%SiC 5%B4C and 90%Al 3%SiC 7%B4C. An attempt has been made to study the characteristics of developed metal matrix composite. As increase in percentage of B4C the micro hardness of the metal matrix composite has increased significantly. The microstructure of the prepared metal matrix composite reveals the uniform distribution of particles in metal matrix

8 December 2018 in Materials Today: Proceedings
Verified
Journal Article
Closed access
ABANIL KUMAR BODUKURI
ANIL KUMAR BODUKURI
SCS. Chandramouli
S. Chandramouli
KEK. Eswaraiah
K. Eswaraiah
JLJ. Laxman
J. Laxman

12 December 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
RJR. Jayachitra
R. Jayachitra
MRM. S. Srinivasa Rao
M. S. Srinivasa Rao
ABANIL KUMAR BODUKURI
ANIL KUMAR BODUKURI
ELEyuel Abate Lemma
Eyuel Abate Lemma
Augmenting concern towards effective utilization of agro waste into useful products has fomented the scientific community to look for alternate source of materials. On circular economy contemplation, natural fibers extricated from agro waste have a potential headway towards evolution of newer materials. Natural fiber hybridized with glass fiber and fortified with epoxy matrix has been found to be a promising material with unique characteristics to suit a wide variety of applications. The hydrophilic natural fibers have a resistance to bind with the polymer matrix; as a result, interfacial adhesion is limited, thereby mechanical properties of the composites are not much appreciable. In this present research, the lignocellulose fibrils extracted from coconut inflorescence were subjected to three types of silane modifications, namely, KH550 (amino silane), KH560 (epoxy silane), and KH570 (methyl silane) before hybridization. The effect of silane modification on the functional groups was investigated. The KH570 silane-modified inflorescence fiber hybridized with glass fiber and fortified epoxy composites were found to exhibit utmost tensile and flexural strengths of 102.6 MPa and 166.89 MPa, respectively. FTIR analysis confirmed KH570 silane modification leads to condensation reaction between interface of fibers and matrix. SEM analysis also confronted the elimination of functional groups present in the coconut inflorescence fibers.

17 May 2023 in Journal of Nanomaterials
Verified
Journal Article
Open access
PDF file
NVN. Vinayaka
N. Vinayaka
ABANIL KUMAR BODUKURI
ANIL KUMAR BODUKURI
GJGanesh K. Jadhav
Ganesh K. Jadhav
NPN. Padmamalini
N. Padmamalini
SPSumit Kumar Pandey
Sumit Kumar Pandey
BSBalkeshwar Singh
Balkeshwar Singh
The intention of this research is to recapitulate the two different fillers like E glass fiber and nanocarbon fiber, which were utilized to fabricate the polymer matrix composites by the assistance of epoxy resin. The mechanical compression molding was influenced to produce the polymer-based nanocomposites under consideration of optimal process parameters. There are three different weight fractions E glass fiber (40%, 45%, and 50%), nanocarbon fiber (10%, 15%, and 20%), and epoxy concentrations (30%, 40%, and 50%), respectively, that were used to produce the polymer matrix composites. Those processing parameters were designed by the L9 Taguchi with DOE technique to conduct the mechanical tests like tensile strength and hardness properties. The signal-to-noise ratios were successfully accomplished to identify optimal process parameters for improving the individual responses. The ANOVA and interaction was additional supports to enhance the mechanical properties. The scanning electron microscope was used to examine the fracture surfaces at the tensile fracture specimens with optimal conditions. Moreover, the maximum mechanical characteristics were attained by the increasing of nanocarbon fiber in the processed polymer matrix composites.


18 December 2018 in Materials Today: Proceedings
Verified
Journal Article
Closed access
ABANIL KUMAR BODUKURI
ANIL KUMAR BODUKURI
KEK. Eswaraiah
K. Eswaraiah
KRKatla Rajendar
Katla Rajendar
VPV. Pradeep
V. Pradeep