This article covers recent advances in the fusion of metasurface antenna design and computational imaging concepts for the realization of imaging systems that are planar, fast, and low cost. We start by explaining the operation of metamaterial antennas which can generate diverse radiation patterns. Their advantages and distinctions from previous antennas are elucidated. We then provide an intuitive overview of the computational imaging framework and argue that metamaterial antennas are a near ideal platform for implementing such schemes at microwave frequencies. We describe two metamaterial antenna implementations: frequency-diverse and electronically reconfigurable. The trade-offs governing the design and operation of each architecture are examined. We conclude by examining the outlook of metamaterial antennas for microwave imaging and propose various future directions.
12 May 2016 in Journal of the Optical Society of America B
We investigate the imaging capabilities of a one-dimensional, dynamic, metamaterial aperture that operates at the lower part of K-band microwave frequencies (17.5–21.1 GHz). The dynamic aperture consists of a microstrip transmission line with an array of radiating, complementary, subwavelength metamaterial irises patterned into the upper conductor. Diodes integrated into the metamaterial resonators provide voltage-controlled switching of the resonant metamaterial elements between radiating and nonradiating states. Applying a series of on/off patterns to the metamaterial resonators produces a series of distinct radiation patterns that sequentially illuminate a scene. The backscattered signal contains encoded scene information over a set of measurements that can be postprocessed to reconstruct an image. We present a series of design considerations for the dynamic aperture, as well as a series of experimental studies performed using a dynamic aperture prototype. High-fidelity, real-time, diffraction-limited imaging using the prototype is demonstrated. The dynamic aperture suggests a path to fast and reliable imaging with low-cost and versatile hardware, for a variety of applications including security screening, biomedical diagnostics, and through-wall imaging.
We perform microwave imaging using a dynamically reconfigurable aperture based on a tunable disordered cavity. The electrically large cavity is cubic with a spherical deformation and supports a multitude of distinct electromagnetic modes that vary as a function of excitation frequency. With a set of irises introduced into one wall of the cavity, the cavity modes couple to spatially distinct radiative modes that vary as a function of the driving frequency. To increase the diversity of the radiated fields, we replace one of the cavity walls with a variable impedance surface consisting of a set of varactor-populated mushroom structures grouped into pixels. The reflection phase of each pixel is independently changed with application of a voltage bias, effectively altering the surface impedance. We demonstrate high-fidelity imaging and examine the role of the impedance-tunable boundary condition, revealing superior performance in comparison with just frequency-diverse measurements. We also demonstrate single-frequency imaging, which can significantly reduce the demands on the required microwave source. The dynamic cavity imager may find relevance in security screening, through-wall imaging, biomedical diagnostics, and radar applications.
2 October 2017 in IEEE Transactions on Antennas and Propagation
We investigate the use of a dynamic metasurface as the transmitting antenna for a synthetic aperture radar (SAR) imaging system. The dynamic metasurface consists of a 1-D microstrip waveguide with complementary electric resonator (cELC) elements patterned into the upper conductor. Integrated into each of the cELCs are two diodes that can be used to shift each cELC resonance out of band with an applied voltage. The aperture is designed to operate at $K$ -band frequencies (17.5–20.3 GHz). We experimentally demonstrate imaging with a fabricated metasurface aperture using well-known SAR modalities, showing image quality comparable to traditional antennas. The agility of this aperture allows it to operate in spotlight and stripmap SAR modes, as well as in a third modality inspired by computational imaging strategies. We describe the dynamic metasurface antenna’s operation in detail, demonstrate high-quality imaging in both 2-D and 3-D, and examine various tradeoffs governing the integration of dynamic metasurfaces in the future SAR imaging platforms.
2 October 2020 in IEEE Transactions on Antennas and Propagation
We present the design, fabrication, and experimental characterization of a 2-D, dynamically tuned, metasurface aperture, emphasizing its potential performance in computational imaging applications. The dynamic metasurface aperture (DMA) consists of an irregular, planar cavity that feeds a multitude of tunable metamaterial elements, all fabricated in a compact, multilayer printed circuit board process. The design considerations for the metamaterial element as a tunable radiator, the associated biasing circuitry, as well as cavity parameters are examined and discussed. A sensing matrix can be constructed from the measured transmit patterns, the singular value spectrum of which provides insight into the information capacity of the apertures. We investigate the singular value spectra of the sensing matrix over a variety of operating parameters, such as the number of metamaterial elements, number of masks (aka tuning states), and number of radiating elements. After optimizing over these key parameters, we demonstrate computational microwave imaging of simple test objects.
22 October 2018 in IEEE Transactions on Communications
We propose a spatial multiplexing system using reconfigurable cavity-backed metasurface antennas. The metasurface antennas consist of a printed cavity with dynamically tunable metamaterial radiators patterned on one side and fed by multiple RF ports on the other side (each port representing one communication node), forming a shared aperture. By individual tuning of the radiators, the antennas can generate steerable, concurrent beams that can be adapted to the properties of multiple-input-multiple-output (MIMO) channels. In this paper, we present a 2 × 2 MIMO system with simulated metasurface antennas as the transmit and receive antennas operating at 5.9 GHz. We demonstrate that the flexibility in beamforming supported by the metasurface antennas can be used to achieve low spatial correlation and high SNR-gain in clustered MIMO channels, leading to a significant improvement of the channel capacity. Numerical studies show 2.36-fold, 2.11-fold enhancements of capacity in MIMO channels with one and two clusters, respectively, compared with a MIMO system consisting of linear dipoles. The MIMO system based on the metasurface antennas can be low-cost, low profile, and low-power. The metasurface antenna thus has potential applications in small cell networks requiring high data rate under bandwidth, energy, and cost constraints.