Electric vehicles (EVs) are gaining mainstream adoption as more countries introduce net-zero carbon targets for the near future. Lithium-ion (Li-ion) batteries, the most commonly used energy storage technology in EVs, are temperature sensitive, and their performance degradates at low operating temperatures due to increased internal resistance. The existing literature on EV-power grid studies assumes that EVs are used under “perfect temperatures" (e.g. 21 Celsius) and temperature-related issues are ignored. In addition, most of the countries/regions with high EV penetration (e.g. Norway, Canada, northern parts of the US and China, etc.) experience harsh cold months, making it extremely critical to understand EV performance and consequently their impacts on the electrical power networks. In this paper, we present a systematic review of the literature that considers the combined investigation of Li-ion battery technology and power networks, with a focus on their operation under suboptimal weather conditions. More specifically, we review: (i) the impact of low temperatures on the electrochemical performance of EV batteries in parking, charging and driving modes, (ii) the challenges experienced by EVs during charging and associated performance degradation, and (iii) the additional impacts of EV charging on the power networks. Our analysis shows that there are serious research gaps in literature and industry applications, which may hinder mass EV adoption and cause delays in charging station roll-out.
1 May 2019 in International Journal of Electrical Power & Energy Systems
This article presents a novel approach to address the critical issues of stable rotation and energy efficiency in electric vehicles (EVs). To achieve these objectives, we propose a comprehensive control system that leverages the power of optimization through optimal predictive control methods. The central idea revolves around minimizing the predicted tracking error for future time steps by intelligently determining control inputs. In this innovative approach, we emphasize the dynamic adjustment of weight coefficients and optimization of wheel torque to strike a delicate balance between energy consumption and enhanced vehicle stability. The result is an adept controller that not only ensures vehicle stability but also significantly reduces energy consumption. Given the inherent limitations of electric motors, especially in terms of torque during vehicle operation, and the growing importance of energy conservation, our method tailors weight coefficients to generate optimal wheel torque. This ensures that the electric motors operate within their power range, thereby minimizing energy consumption and extending the overall efficiency of EVs. The combination of stable rotation and energy efficiency offered by this control system represents a promising step forward in the realm of electric vehicles, making them more sustainable and environmentally friendly while maintaining the high standards of performance and safety that consumers expect.
Transformer-less inverters are widely used in grid-tied photovoltaic (PV) applications due to their characteristics such as higher efficiency and lower price. In common-ground transformer-less PV inverters, the neutral point of grid is connected to the negative polarity of the PV panel directly to bypass the parasitic capacitances and to mitigate the leakage current. In this study, a single phase transformer-less grid-tied inverter is proposed and to obtain the unique characteristics of the recommended grid-connected topology, the series-parallel switching technique of the switched capacitor module in a packed unit is applied. Also, by utilizing the common grounding method, the leakage current is eliminated. The provided inverter can generate three-level output voltage waveform. To generate the switching gate pulses of utilized power switches, the peak current controller method is applied. The injected power flows (active and reactive powers) are adjusted using peak current control (PCC) method. Finally, a completely adjusted sinusoidal current can be delivered to power grid. In the next section, the operation procedure, comparison results are presented. Finally, to verify the accurate operation and the theoretical equations of the proposed inverter, simulation results are presented.