A highly stable electrode material of Ruddlesden–Popper structure, La1.2Sr0.8Mn0.4Fe0.6O4 (RPLSMF), is prepared from La0.6Sr0.4Mn0.2Fe0.8O3 (LSMF) perovskite by in situ annealing in flowing H2 at the operation temperature of solid oxide fuel cells. The crystallinity, morphology, and oxidation states of each element and electrochemical properties of RPLSMF are characterized. Doping Mn into the B-site of RPLSMF improves the phase stability of the structure in H2 to prevent formation of La2O3. The XPS results also suggest that improved phase stability promotes formation of Fe2+/3+ pairs that facilitate fuel oxidation by redox coupling. Additionally, during phase transition to RPLSMF, metallic Fe nanoparticles form, which enlarge H2 chemisorption and oxidation sites. Consequently, RPLSMF exhibits outstanding and stable electrochemical activity with a maximum power density of 0.72 W cm−2 at 1073 K when used as an anode material in LSGM electrolyte-supported cells. As the phase transition between the RPLSMF and LSMF is reversible under a redox environment, RPLSMF/GDC is applied as an electrode in the symmetrical cell of RPLSMF-GDC/LSGM/LSMF-GDC. It exhibits a substantial power density of 0.64 W cm−2 with a total polarization resistance of 0.51 Ω cm2.
Robust oxide electrodes with high activity and durability have attracted significant attention as alternatives for Ni‐based cathodes in high‐temperature solid oxide electrolysis cells (SOECs). Noncoking La(Sr)Cr(Mn)O3 (LSCM)‐based oxide cathodes have shown promise as durable ceramic cathodes; however, they suffer from low electrocatalytic activities in electrochemical CO2 reduction. In this study, a dual‐phase composite electrode consisting of LSCM and Ce(Mn, Fe)O2 (CMF) is developed to enhance the electrocatalytic activity of CO2 reduction in SOECs. The developed electrode shows excellent electrolysis performance of 2.64 and 1.22 A cm–2 at 1123 K, when voltages of 1.5 and 1.2 V are applied, respectively, without using any precious metal catalysts. The enhanced electrolysis performance is attributed to increases in electrocatalytic activity and surface oxygen vacancies caused by the CMF, which accelerates CO2 adsorption and results in the subsequent dissociation of the carbonate intermediate in the CO2 reduction.