Unmanned aerial vehicle laser scanning (UAVLS) systems present a relatively new means of remote sensing and are increasingly applied in the field of forest ecology and management. However, one of the most essential parameters in forest inventory, tree diameter at breast height (DBH), cannot be directly extracted from aerial point cloud data due to the limitations of scanning angle and canopy obstruction. Therefore, in this study DBH-UAVLS point cloud estimation models were established using a generalized nonlinear mixed-effects (NLME) model. The experiments were conducted using Larix olgensis as the subject species, and a total of 8364 correctly delineated trees from UAVLS data within 118 plots across 11 sites were used for DBH modeling. Both tree- and plot-level metrics were obtained using light detection and ranging (LiDAR) and were used as the models’ independent predictors. The results indicated that the addition of site-level random effects significantly improved the model fitting. Compared with nonparametric modeling approaches (random forest and k-nearest neighbors) and uni- or multivariable weighted nonlinear least square regression through leave-one-site-out cross-validation, the NLME model with local calibration achieved the lowest root mean square error (RMSE) values (1.94 cm) and the most stable prediction across different sites. Using the site in a random-effects model improved the transferability of LiDAR-based DBH estimation. The best linear unbiased predictor (BLUP), used to conduct local model calibration, led to an improvement in the models’ performance as the number of field measurements increased. The research provides a baseline for unmanned aerial vehicle (UAV) small-scale forest inventories and might be a reasonable alternative for operational forestry.

The mixture of tree species has gradually become the focus of forest research, especially native species mixing. Mixed-species plantations of Manchurian ash (Fraxinus mandshurica Rupr.) and Changbai larch (Larix olgensis Henry) have successfully been cultivated in Northeast China. Height–diameter (H–D) models were found to be effective in designing the silvicultural planning for mixed-species plantations. Thus, this study aimed to develop a new system of H–D models for juvenile ash and larch mixed-species plantations, based on competition information and tree and stand attributes. The leave-one-out cross-validation was utilized for model validation. The result showed that the H–D relationship was affected not only by the tree attributes (i.e., tree size and competition information) but also by stand characteristics, such as site quality and species proportion of basal area. The best model explained more than 80% and 85% variation of the tree height of ash and larch, respectively. Moreover, model validation also confirmed the high accuracy of the newly developed model’s predictions. We also found that, in terms of total tree height, ash in middle rows were higher than those in side rows, while larch in the middle rows were higher in the early growth period but then became lower than those in the side rows, as the diameter increased. The newly established H–D models would be useful for forestry inventory practice and have the potential to aid decisions in mixed-species plantations of ash and larch.

As a core content of forest management, the height to crown base (HCB) model can provide a theoretical basis for the study of forest growth and yield. In this study, 8364 trees of Larix olgensis within 118 sample plots from 11 sites were measured to establish a two-level nonlinear mixed effect (NLME) HCB model. All predictors were derived from an unmanned aerial vehicle light detection and ranging (UAV-LiDAR) laser scanning system, which is reliable for extensive forest measurement. The effects of the different individual trees, stand factors, and their combinations on the HCB were analyzed, and the leave-one-site-out cross-validation was utilized for model validation. The results showed that the NLME model significantly improved the prediction accuracy compared to the base model, with a mean absolute error and relative mean absolute error of 0.89% and 9.71%, respectively. In addition, both site-level and plot-level sampling strategies were simulated for NLME model calibration. According to different prediction scale and accuracy requirements, selecting 15 trees randomly per site or selecting the three largest trees and three medium-size trees per plot was considered the most favorable option, especially when both investigations cost and the model’s accuracy are primarily considered. The newly established HCB model will provide valuable tools to effectively utilize the UAV-LiDAR data for facilitating decision making in larch plantations management.

Short-rotation forestry is of interest to provide biomass for bioenergy and act as a carbon sink to mitigate global warming. The Poplar tree (Populus × xiaohei) is a fast-growing and high-yielding tree species in Northeast China. In this study, a total of 128 Populus × xiaohei trees from the Songnen Plain, Heilongjiang Province, Northeastern China, were harvested. Several available independent variables, such as tree diameter at breast height (D), tree’s total height (H), crown width (CW), and crown length (CL), were differently combined to develop three additive biomass model systems and eight stem volume models for Populus × xiaohei tree. Variance explained within the three additive biomass model systems ranged from 83% to 98%, which was lowest for the foliage models, and highest for the stem biomass models. Similar findings were found in the stem volume models, in which the models explained more than 94% of the variance. The additional predictors, such as H, CL, or CW, evidently enhanced the model fitting and performance for the total and components biomass along with the stem volume models. Furthermore, the biomass conversion and expansion factors (BCEF_s) of the root (118.2 kg/m³), stem (380.2 kg/m³), branch (90.7 kg/m³), and foliage (31.2 kg/m³) were also calculated. The carbon concentrations of Populus × xiaohei in root, stem, branch, and foliage components were 45.98%, 47.74%, 48.32%, and 48.46%, respectively. Overall, the newly established models in this study provided complete and comprehensive tools for quantifying the biomass and stem volume of Populus × xiaohei, which might be essential to be specifically utilized in the Chinese National Forest Inventory.

Three systems of additive biomass models were developed and the effects of tree components, tree sizes, and tree growing regions on the carbon concentration were analyzed for Mongolian oak (Quercus mongolica Fisch. ex Ledeb.) in the natural forests of Northeastern China. The nonlinear seemingly unrelated regression (NSUR) method was used to fit each of the three systems simultaneously; namely, aggregated model systems with no parameter restriction (AMS0), aggregated model systems with one parameter restriction (AMS1), and aggregated model systems with three parameter restrictions (AMS3). A unique weighting function for each biomass model was applied to address the heteroscedasticity issue. The systems assertively guarantee the additivity property, in which, the summation of the respective predicted tree components (i.e., root, stem, branch, and foliage) will match the prediction of subtotals (i.e., crown and aboveground) and total biomass. Using one-, two-, and three-predictor combinations (i.e., D (diameter at breast height), D and H (total height), and D, H, and CL (crown length)) as the general model underlying formats, three systems of additive biomass model were developed. Our results indicate that (1) all of the aggregated model systems performed well and the differences between the systems were relatively small; (2) the rank order of the three systems based on an array of statistics are as follows: AMS0 > AMS1 > AMS3; (3) the carbon concentration significantly varied depending on the types of tree tissues and growing regions; (4) the regional respective component carbon concentration and regional weighted mean carbon concentration multiplied by observed biomass value appeared to be the best approach to calculate carbon stock.