Hassan Rabah

Prof. Hassan Rabah

Jean Lamour Institute, University of Lorraine, UMR 7198, 54000 Nancy, France
orcid

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 August 2015 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
ARAndrianiaina Ravelomanantsoa
Andrianiaina Ravelomanantsoa
HRHassan Rabah
Hassan Rabah
ARAmar Rouane
Amar Rouane
Compressed sensing (CS) is a technique that is suitable for compressing and recovering signals having sparse representations in certain bases. CS has been widely used to optimize the measurement process of bandwidth and power constrained systems like wireless body sensor network. The central issues with CS are the construction of measurement matrix and the development of recovery algorithm. In this paper, we propose a simple deterministic measurement matrix that facilitates the hardware implementation. To control the sparsity level of the signals, we apply a thresholding approach in the discrete cosine transform domain. We propose a fast and simple recovery algorithm that performs the proposed thresholding approach. We validate the proposed method by compressing and recovering electrocardiogram and electromyogram signals. We implement the proposed measurement matrix in a MSP-EXP430G2 LaunchPad development board. The simulation and experimental results show that the proposed measurement matrix has a better performance in terms of reconstruction quality compared with random matrices. Depending on the compression ratio, it improves the signal-to-noise ratio of the reconstructed signals from 6 to 20 dB. The obtained results also confirm that the proposed recovery algorithm is, respectively, 23 and 12 times faster than the orthogonal matching pursuit (OMP) and stagewise OMP algorithms.

2 October 2014 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
HRHassan Rabah
Hassan Rabah
AAAbbes Amira
Abbes Amira
BMBasant Kumar Mohanty
Basant Kumar Mohanty
MAMariam AlMaadeed
Mariam AlMaadeed
PMPramod Kumar Meher
Pramod Kumar Meher
In this paper, we present a novel architecture based on field-programmable gate arrays (FPGAs) for the reconstruction of compressively sensed signal using the orthogonal matching pursuit (OMP) algorithm. We have analyzed the computational complexities and data dependence between different stages of OMP algorithm to design its architecture that provides higher throughput with less area consumption. Since the solution of least square problem involves a large part of the overall computation time, we have suggested a parallel low-complexity architecture for the solution of the linear system. We have further modeled the proposed design using Simulink and carried out the implementation on FPGA using Xilinx system generator tool. We have presented here a methodology to optimize both area and execution time in Simulink environment. The execution time of the proposed design is reduced by maximizing parallelism by appropriate level of unfolding, while the FPGA resources are reduced by sharing the hardware for matrix-vector multiplication across the data-dependent sections of the algorithm. The hardware implementation on the Virtex6 FPGA provides significantly superior performance in terms of resource utilization measured in the number of occupied slices, and maximum usable frequency compared with the existing implementations. Compared with the existing similar design, the proposed structure involves 328 more DSP48s, but it involves 25802 less slices and 1.85 times less computation time for signal reconstruction with N = 1024, K = 256, and m = 36, where N is the number of samples, K is the size of the measurement vector, and m is the sparsity. It also provides a higher peak signal-to-noise ratio value of 38.9 dB with a reconstruction time of 0.34 μs, which is twice faster than the existing design. In addition, we have presented a performance metric to implement the OMP algorithm in resource constrained FPGA for the better quality of signal reconstruction.

21 May 2014 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
ARAndrianiaina Ravelomanantsoa
Andrianiaina Ravelomanantsoa
HRHassan Rabah
Hassan Rabah
ARAmar Rouane
Amar Rouane
Compressed sensing (CS) is an emerging signal processing technique that enables sub-Nyquist measurement of signals having sparse representations in certain bases. Since most physiological signals treated within a wireless body area network (WBAN) are sparse, CS can be applied to WBANs to reduce the number of measurements and minimize the energy consumption of the sensor nodes. In this paper, we propose a simple and efficient CS encoder device used to measure signals within sensor nodes of a WBAN. A digital and an analog models of the proposed CS encoder are presented. As the CS encoder and decoder are tightly coupled, a model of the overall acquisition chain is required in the first stages of development and validation. To do this, we propose a virtual prototyping of the system with SystemC-AMS. A SPICE model and a hardware prototype of the proposed CS encoder are also presented. The simulation results of both models show that the proposed encoder was able to compressively measure an electrocardiogram (ECG) and an electroencephalogram signals with compression ratios of 6:1 and 4:1, respectively, which save 82.9% and 75% of the energy consumption of transceivers. The experiment results were consistent with those of the model and show that the hardware prototype was able to compressively measure an ECG signal with a compression ratio of 8:1. Comparison with a random demodulator (RD) was carried out and shows that the proposed encoder outperformed RD in terms of compression ratio and reconstruction quality.

13 May 2021 in IEEE Transactions on Circuits and Systems for Video Technology
Verified
Journal Article
Closed access
KSKaicong Sun
Kaicong Sun
MKMaurice Koch
Maurice Koch
ZWZhe Wang
Zhe Wang
Slavisa JovanovicSlavisa Jovanovic
Slavisa Jovanovic
HRHassan Rabah
Hassan Rabah
SSSven Simon
Sven Simon
In this paper, we propose a hardware-efficient residual recurrent neural network for real-time video super-resolution (VSR) based on field programmable gate array (FPGA). Although recent learning-based VSR methods have achieved remarkable performance, the large computational complexity prohibits the deployment of the sophisticated VSR models on FPGA for real-time applications. Limited by the hardware resources, state-of-the-art FPGA-based VSR methods perform single-image super-resolution over the video sequence and suffer from temporal inconsistency. In order to exploit the inter-frame temporal correlation for real-time VSR on low-complexity hardware, we introduce a hardware-efficient recurrent neural network ERVSR. Specially, the proposed ERVSR leverages the input frame and the temporal information entailed in the hidden state to reconstruct the high-resolution counterpart. To reduce the network parameters, the low-resolution input branch and the hidden state branch are convolved individually and a channel modulation coefficient is proposed to explicitly guide the network to allocate the amount of output feature channels to each branch. Additionally, in order to reduce the memory consumption, we perform a dedicated lightweight compression of the hidden state by introducing a statistical normalization scheme followed by a fixed-point quantization. Besides, we adopt group convolution and depthwise separable convolution to further compact the network. We evaluated the proposed ERVSR on multiple public datasets from different aspects. Experimental results demonstrate that ERVSR performs better than the existing state-of-the-art FPGA-based VSR methods in both image quality and data throughput.

3 February 2023 in Sensors
Verified
Journal Article
Open access
PDF file
AIAli Rida Ismail
Ali Rida Ismail
Slavisa JovanovicSlavisa Jovanovic
Slavisa Jovanovic
Naeem RamzanNaeem Ramzan
Naeem Ramzan
HRHassan Rabah
Hassan Rabah
Increased life expectancy in most countries is a result of continuous improvements at all levels, starting from medicine and public health services, environmental and personal hygiene to the use of the most advanced technologies by healthcare providers. Despite these significant improvements, especially at the technological level in the last few decades, the overall access to healthcare services and medical facilities worldwide is not equally distributed. Indeed, the end beneficiary of these most advanced healthcare services and technologies on a daily basis are mostly residents of big cities, whereas the residents of rural areas, even in developed countries, have major difficulties accessing even basic medical services. This may lead to huge deficiencies in timely medical advice and assistance and may even cause death in some cases. Remote healthcare is considered a serious candidate for facilitating access to health services for all; thus, by using the most advanced technologies, providing at the same time high quality diagnosis and ease of implementation and use. ECG analysis and related cardiac diagnosis techniques are the basic healthcare methods providing rapid insights in potential health issues through simple visualization and interpretation by clinicians or by automatic detection of potential cardiac anomalies. In this paper, we propose a novel machine learning (ML) architecture for the ECG classification regarding five heart diseases based on temporal convolution networks (TCN). The proposed design, which implements a dilated causal one-dimensional convolution on the input heartbeat signals, seems to be outperforming all existing ML methods with an accuracy of 96.12% and an F1 score of 84.13%, using a reduced number of parameters (10.2 K). Such results make the proposed TCN architecture a good candidate for low power consumption hardware platforms, and thus its potential use in low cost embedded devices for remote health monitoring.

1 July 2012
Verified
Conference Paper
Closed access
PBPierre Blache
Pierre Blache
HRHassan Rabah
Hassan Rabah
AAAbbes Amira
Abbes Amira
In this paper we present a novel hardware architecture for reconstruction of signals in compressed sensing. The proposed architecture is based on the orthogonal matching pursuit (OMP) algorithm which has been modeled with Simulink and implemented on FPGA using Xilinx system generator. The main aim is to optimize both area and execution time. The execution time is reduced by exploiting parallelism inside each kernel, where the area is reduced by reusing several operators such as matrix vector multiplication. Hardware implementation on the Virtex5 FPGA has shown excellent results compared to existing implementations. Moreover, our solution achieves a speedup of 38 compared to a software solution on the Intel core duo CPU.