The changing energy landscape in Europe, marked with the development of the Energy Union in 2015, had a profound impact also on the European port sector. With European ports becoming key points of energy production, but also being prominent energy users, energy consumption has naturally risen into a top environmental priority for port authorities. To this end, the paper provides a pragmatic and comprehensive overview of the main policies, technologies and practices that European ports have adopted to-date for enhancing their energy efficiency. Addressing a gap that has been identified in relevant recent literature, it gathers actual data and port experiences from many different sources in a first attempt to better facilitate knowledge and experience-sharing activities, that will support ports in collectively moving towards a zero-emission and climate-neutral future. Most importantly, it presents an effort to rationalize research findings, assist in aligning them with practice, shed more light on the exploitation path of this line of research and better inform future research efforts.
This paper aims to explore the qualification of step- and lock-in heating thermography as techniques capable of inspecting new composite rail carbodies following input and inspection requirements set by the rail manufacturing industry. Specifically, we studied (a) a monolithic CFRP sample (20 mm thickness) and (b) a CFRP–PET foam–CFRP sandwich (40 mm total thickness) component, that were manufactured with artificial defects, to replicate the side wall sections of a carbody. The samples proved to be very challenging to test using only one-sided inspection due to (1) exhibiting significant thickness compared to existing literature, (2) low surface emissivity and (3) that the foam core of the sandwich sample was a thermal insulating material. In addition, the sandwich sample was designed with defects on both skins. Both thermography techniques provided similar defect detection results, although step heating offered faster detection. In the case of the monolithic panel, defects up to 10 mm depth were detected, with minor detection of defects at 15 mm depth with a step-heating protocol between 90 s and 120 s overall acquisition, which was faster than the 140 s used with the lock-in technique. For the sandwich component only the front skin defects were detected, with both techniques using heating protocols between 70–120 s.
The following paper presents the application of Non-destructive Testing methods such as thermography for fault finding in internal components of buses and specifically the air compressor unit. Such units consist of a small internal combustion engine that provides air to the vehicle’s breaks, suspension and passenger door operations. Hoses transferring compressed air from the compressor to the rest of the system can get clogged, leading the air compressor to potential failure and even fire of the unit. Thermal imaging was applied in a number of Mercedes Citaro LE and Volvo B9 buses provided by a bus fleet operator, to evaluate whether such clogging can be detected at an early stage, during routine maintenance of the bus. A number of acquisitions, using a thermal camera were taken, with the air compressor under different loads and under heating or cooling phase of the unit. The paper presents that thermography can be used to detect such failures by observing specific hoses of the unit as well as the overall thermal behaviour of the air compressor.
This paper examines the objectives and the main elements of a national energy policy for transport based on the experience of such plans in the six Mediterranean EU-member countries. These plans define the energy and Green House Gas emission reduction objectives in the field of Transport which are adopted by each country and provide a guideline for future transport policies. They are strategic energy management plans which have to be aligned with the overall energy plans of the country that define the objectives for reducing the total energy consumption and developing new renewable sources of energy. Furthermore, the paper refers to the potential energy savings and the use of alternative fuels in Transport for the case of other Mediterranean region countries and defines the main pillars of a national strategic plan for energy policy for the Transport sector.