To solve the problems of the nonlinear damping force in the traditional squeeze film damper (SFD), a novel structure of G-type integral squeeze film damper (GISFD) based on ISFD is proposed for the first time. The finite element model and test rig of the ball bearing-rotor system are established to explore the influence of GISFD and ISFD on the dynamic characteristics of the unbalanced rotor system. The results show that both GISFD and ISFD can change the critical speed of the rotor system, reduce the bending strain energy of the shaft, and reduce the bearing dynamic load of the rotor system. Through comparison, it is found that the effect of GISFD is more obvious. The experimental results show that, compared with the unbalanced rotor system without damper, the peak-peak value of amplitude in the rotor system with GISFD and ISFD at 3000 rpm is reduced by 25.53 and 15.81%. The amplitude in the disk at the first-order critical speed is effectively reduced, and the reduction range reach 52.01 and 35.44%, respectively. GISFD has a more significant effect of suppressing unbalanced vibration, and has superior vibration damping performance when compared with ISFD.
6 August 2021 in International Journal of Turbo & Jet-Engines
As a novel structural damper, the unique structural characteristics of the integral squeeze film damper (ISFD) solve the nonlinear problem of the traditional squeeze film damper (SFD), and it has good linear damping characteristics. In this research, the experimental studies of ISFD vibration reduction performance are carried out for various working conditions of unbalanced rotors. Two ball bearing-rotor system test rigs are built based on ISFD: a rigid rotor test rig and a flexible rotor test rig. When the rotational speed of rigid rotor is 1500 rpm, ISFD can reduce the amplitude of the rotor by 41.79%. Under different unbalance conditions, ISFD can effectively improve the different degrees of unbalanced faults in the rotor system, reduce the amplitude by 43.21%, and reduce the sensitivity of the rotor to unbalance. Under different rotational speed conditions, ISFD can effectively suppress the unbalanced vibration of rigid rotor, and the amplitude can be reduced by 53.51%. In the experiment of the unbalanced response of the flexible rotor, it is found that ISFD can improve the damping of the rotor system, effectively suppress the resonance of the rotor at the critical speed, and the amplitude at the first-order critical speed can be reduced by 31.72%.
10 January 2025 in International Journal of Turbo & Jet-Engines
In order to address the issue of excessive vibration and critical speed approaching the operating speed of the aero-engine fan rotor, the integral squeeze film damper (ISFD) was investigated for its impact on the fan rotor tester of turbofan. The static characteristic and dynamic characteristics of ISFD and fan rotor were analyzed through simulation calculation. The results show that ISFD can effectively suppress the vibration, improve the stress distribution within the rotor, and adjust the critical speed of the rotor. Experimental tests were conducted on the fan rotor tester of turbofan, revealing significant reductions in vibration: At 8,000 r/min, the peak-to-peak displacement was reduced by 25.35 %, while the vibration of 1X frequency and 2X frequency was suppressed by 84.48 % and 33.46 %, respectively. It also successfully adjusted critical speed within this system, reducing the critical vibration by 58.81 % with a decrease in critical speed from 7,397 r/min to 3,265 r/min.
2 July 2020 in International Journal of Turbo & Jet-Engines
As a novel structural damper, the unique structural characteristics of the integral squeeze film damper (ISFD) solve the nonlinear problem of the traditional squeeze film damper (SFD), and it has good linear damping characteristics. In this research, the experimental studies of ISFD vibration reduction performance are carried out for various working conditions of unbalanced rotors. Two ball bearing-rotor system test rigs are built based on ISFD: a rigid rotor test rig and a flexible rotor test rig. When the rotational speed of rigid rotor is 1500 rpm, ISFD can reduce the amplitude of the rotor by 41.79%. Under different unbalance conditions, ISFD can effectively improve the different degrees of unbalanced faults in the rotor system, reduce the amplitude by 43.21%, and reduce the sensitivity of the rotor to unbalance. Under different rotational speed conditions, ISFD can effectively suppress the unbalanced vibration of rigid rotor, and the amplitude can be reduced by 53.51%. In the experiment of the unbalanced response of the flexible rotor, it is found that ISFD can improve the damping of the rotor system, effectively suppress the resonance of the rotor at the critical speed, and the amplitude at the first-order critical speed can be reduced by 31.72%.
Hydrogen circulation pumps in industrial manufacturing equipment face typical sealing challenges at the shaft end. Due to the small molecular diameter and high diffusivity of hydrogen, a single improvement approach cannot adequately enhance sealing performance. While previous studies have largely focused on material modification, systematic investigations into the influence of structural parameters remain limited. Lip radius, lip thickness, and contact lip width are key structural parameters governing sealing performance; however, systematic investigations into modified PTFE lip seals under hydrogen operating conditions remain scarce. To address this gap, this paper presents an integrally structured aluminum alloy skeleton modified PTFE lip seal and develops a finite element analysis model. In this model, the mechanical behavior of the modified PTFE is described using the bilinear isotropic hardening model, while the contact nonlinearity between the lip and the shaft is solved using the Newton–Raphson iterative method. The effects of structural parameters on sealing performance indicators, including maximum contact pressure, maximum friction stress, and shaft clamping force and torque, are systematically analyzed. The results indicate that reducing the lip radius, increasing the lip thickness, and increasing the contact lip width can effectively improve the sealing-related contact characteristics of the seal ring.
A vehicle–track system finite element (FE) model coupled with a rail surface wear model and an offline rail profile update strategy have been developed to study the formation and evolution of rail corrugation at rail welded joints under multiple wheel passages. The FE model calculates the vehicle–track dynamics and rail surface wear. Fourier series is used to fit the dynamic wear, and then the rail profile is updated offline by modifying node coordinates based on the fitted dynamic wear. The FE model’s reliability for wheel–rail contact solutions was confirmed through comparison of computed contact stresses (FE model vs. CONTACT). The vehicle–track dynamic behaviors of the FE model have been validated with the measured wheel–rail vertical force at corrugated track. It is found that after multiple wheel passages, rail surface develops corrugation with a dominant wavelength of approximately 150 mm. The corrugation depth grows gradually with the number of wheel passages at a gradually decreasing rate, whereas the depth of the welded joint gradually decreases. The welded joint and corrugation move toward the rolling direction during wheel passages. The corrugation is the most severe when the weld is located above the sleeper. Controlling the welded joint wavelength to 30 mm can significantly suppress corrugation development. Under a constant traction level, a lower friction coefficient will result in more severe rail corrugation.