Silviana Silviana

Dr. Silviana Silviana

Department of Chemical Engineering, Diponegoro University

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 January 2021 in Materials
Verified
Journal Article
Open access
PDF file
SSSilviana Silviana
Silviana Silviana
ADAdi Darmawan
Adi Darmawan
Febio DalantaFebio Dalanta
Febio Dalanta
ASAgus Subagio
Agus Subagio
Ferry HermawanFerry Hermawan
Ferry Hermawan
HSHansel Milen Santoso
Hansel Milen Santoso
Bamboo, a fast-growing plant from Asia, is used as building material with unique properties, while exhibiting fast degradation due to its hydrophobicity. Therefore, many attempts have been implemented using several technologies for bamboo modification to alter the hydrophobicity. Most previous studies producing superhydrophobic properties are conducted by using tetraethoxysilane (TEOS) as a precursor agent. However, this method, using TEOS with harmful properties and unaffordable compounds, requires many steps to accomplish the experimental method. Therefore, this paper employed geothermal solid waste as a silica source of the precursor. Thus, an effective and efficient method was applied to prepare superhydrophobic coating by using a precursor of geothermal silica and further modification using hexamethyldisilazane (HMDS) and trimethylchlorosilane (TMCS). The research was executed by the full factorial statistical method using two numerical variables (HMDS/TMCS concentration and silica concentration) and one categorical variable (solvent types). The uncoated material revealed higher weight gain in mass and moisture content than that of the coated bamboo after the soil burial test to assess the durability of the bamboo. However, the durability of superhydrophobic coating realized hydrophobic performance for both agents during sand abrasion for a total of 120 s at an angle of 45°. Statistical results showed the optimum contact angle (CA) achieved in superhydrophobic performance with lower silica concentration for HMDS concentration and the appropriate solvent of n-hexane for HMDS and iso-octane for TMCS. All results were supported using many instruments of analysis to confirm the step-by-step alteration of geothermal silica to be used as a superhydrophobic coating, such as XRF, XRD, FTIR, SEM, and SEM EDX.

14 March 2018 in MATEC Web of Conferences
Verified
Journal Article
Open access
SSSilviana Silviana
Silviana Silviana
WBWardhana J. Bayu
Wardhana J. Bayu
Silicon (Si) is a promising alternative material for the anode Lithium ion Battery (LIB). Si has a large theoretical capacity about 3579 mA hg-1, ten times greater than the commercial graphite anode (372 mA hg-1). Bamboo is a source of organic silica (bio-silica). Most part biogenetic content of SiO2 is obtained in bamboo leaves. This paper aims to investigate the synthesis nano Si from bamboo leaves through magnesiothermic reduction after silica extraction using sol–gel method and to observe nano Si of bamboo leaf as mixed material for lithium ion baterry. Silica and silicon content was determined using XRF. Silica product has 96,3 wt. % yield of extraction from bamboo leaf, while silicon yield was obtained 61.2 wt. %. The XRD pattern revealed that silica and silicon product were amourphous. The extracted silica and silicon from bambo leaf has spherical shape and agglomerated form. As anoda material for LIB, silicon product achieved 0,002 mAh capacity for 22 cycle.

13 May 2022 in Journal of Sol-Gel Science and Technology
Verified
Journal Article
Closed access
PDF file
SSSilviana Silviana
Silviana Silviana
FHFerry Hermawan
Ferry Hermawan
JIJoshua Indracahya
Joshua Indracahya
DKDinda Ajeng Lestari Kusumawardhani
Dinda Ajeng Lestari Kusumawardhani
Febio DalantaFebio Dalanta
Febio Dalanta

13 June 2022 in Industrial & Engineering Chemistry Research
Verified
Journal Article
Closed access
SSSilviana Silviana
Silviana Silviana
AJAtikah A. Janitra
Atikah A. Janitra
ASAfriza N. Sa’aDah
Afriza N. Sa’aDah
FDFebio Dalanta
Febio Dalanta

10 November 2022 in ACS Omega
Verified
Journal Article
Open access
SSSilviana Silviana
Silviana Silviana
EPEnggar C. Prastiti
Enggar C. Prastiti
FHFerry Hermawan
Ferry Hermawan
ASAgus Setyawan
Agus Setyawan
Noise pollution, which has become a major environmental issue in urban areas, can be minimized using acoustic insulation derived from cellulose-silica aerogel. The raw materials required in the process include waste newspaper-based cellulose, geothermal silica, and NaOH/ZnO solution. Therefore, this study investigates the effect of cellulose, silica, and ZnO concentrations on optimizing the sound absorption coefficient (SAC) using the Box-Behnken design (BBD). The results showed that the optimum conditions were obtained at 39.8578 wt % cellulose, 16.5428 wt % silica, and 0.5684 wt % ZnO. The impedance test for the cellulose aerogel and cellulose-silica aerogel showed SAC values of 0.59 and 0.70, respectively, and were characterized by XRD, FTIR, BET-BJH, SEM-EDX, and TG. The results of XRD and FTIR data indicate that the product was cellulose-silica aerogel, and the SEM micrographs showed that silica particles were attached to the fiber surface. Furthermore, type IV isotherms were observed in the cellulose-silica aerogel, typical of mesoporous materials. The presence of silica strengthened the aerogel structure, improved its thermal stability, and increased the surface area but decreased its pore size.

6 September 2021 in Korean Journal of Chemical Engineering
Verified
Journal Article
Closed access
PDF file
SSSilviana Silviana
Silviana Silviana
DADidi Dwi Anggoro
Didi Dwi Anggoro
CSCantika Aulia Salsabila
Cantika Aulia Salsabila
KAKevin Aprilio
Kevin Aprilio