Aysun Sofuoglu

Aysun Sofuoglu


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 March 2020 in Waste and Biomass Valorization
Verified
Journal Article
Open access
PDF file
DBDildare Basalp
Dildare Basalp
FTFunda TIHMINLIOĞLU
Funda TIHMINLIOĞLU
Sait Cemil SofuogluSait Cemil Sofuoglu
Sait Cemil Sofuoglu
FIFikret Inal
Fikret Inal
ASAysun Sofuoglu
Aysun Sofuoglu
In this study, Wood Plastic Composites (WPCs) were produced from post-consumer bulky wastes of recycled plastic and wood in order to minimize waste, decrease environmental effects of plastics, reserve natural resources, and support circular economy for sustainable production and consumption. Five different types of polypropylene (PP) or polyethylene (PE) based recycled plastics and wood obtained from urban household bulky wastes were used in the production of recycled WPC composites, r-WPCs. Virgin WPC (v-WPC) and r-WPC compounds were prepared with wood flour (WF) and maleic anhydride grafted compatibilizer (MAPP or MAPE) to evaluate the effect of recycled polymer type and compatibilizer on the mechanical properties. It was found that tensile strength properties of r-WPCs produced from recycled PP (r-PP) were higher than that of the r-WPCs produced from mixed polyolefins and recycled PE. r-WPCs containing anti-oxidants, UV stabilizers, and compatibilizer with different WF compositions were produced from only recycled garden fraction PP (PPFGF) to determine the optimum composition and processing temperature for pilot scale manufacturing of r-WPCs. Based on tensile, impact, flexural, and water sorption properties of r-WPC compounds with different formulations, the optimum conditions of r-WPC compounds for industrial manufacturing process were determined. Surface morphology of fractured surfaces as well as tensile, flexural and density results of r-WPC compounds revealed the enhancement effect of MAPP on interfacial adhesion in r-WPCs. r-WPC products (crates and table/chair legs) based on bulky wastes were produced using an injection molding process at industrial scale by using 30 wt% WF-filled r-WPC compound. This study demonstrated that r-WPC compounds from recycled bulky plastic and wood wastes can be used as a potential raw material in plastic as well as WPC industry, contributing to circular economy. Graphic

20 August 2022 in Environment Systems and Decisions
Verified
Journal Article
Closed access
PDF file
EBEsin Balci
Esin Balci
SBSezin Balci
Sezin Balci
ASAysun Sofuoglu
Aysun Sofuoglu

11 November 2010 in Indoor Air
Verified
Journal Article
Open access
PDF file
ASAysun Sofuoglu
Aysun Sofuoglu
NKN. Kiymet
N. Kiymet
PKP. Kavcar
P. Kavcar
Sait Cemil SofuogluSait Cemil Sofuoglu
Sait Cemil Sofuoglu
Indoor air gas and particulate‐phase samples (PM2.5) were collected from a primary school classroom and a women’s sport center because children are one of the sensitive population subgroups and women are frequent users of personal care products in addition to the high level of activity in this specific microenvironment. PM2.5 was collected with a Harvard impactor, and polyurethane foam was used for the gas phase. Samples were ultrasonically extracted, concentrated, and analyzed with a GC‐MS. The mean gas‐phase concentrations in the classroom ranged from 0.12 ± 0.2 ng/m3 for MK to 267 ± 56 ng/m3 for HHCB, while it was from 0.08 ± 0.10 ng/m3 for AHMI to 144 ± 61 ng/m3 for HHCB in the sports center. Particulate‐phase average concentrations in the sports center ranged from 0.22 ± 0.11 ng/m3 for ATII to 1.34 ± 071 ng/m3 for AHTN, while it ranged from 0.05 ± 0.02 ng/m3 (musk xylene) to 2.50 ± 0.94 ng/m3 (HHCB) in the classroom. Exposure–risk assessment showed that inhalation route is most probably far less significant than the dermal route; however, it should be noted that the exposure duration covered in this study was not the larger fraction of the day. Synthetic musk compounds (SMCs) are found everywhere because their use in household and personal care products (laundry detergents, carpet cleaners, cleaning agents, fabric softener soaps, shampoos, cosmetics, etc.) has been increasing. These compounds are semi‐volatiles that may result in direct and indirect exposures through inhalation route. Although SMCs were found to be dominant in the gas phase, exposure via inhalable particles may be important as we found several compounds in the particulate phase (PM2.5).

1 November 2021 in Environmental Technology & Innovation
Verified
Journal Article
Open access
AGAysegul Yagmur Goren
Aysegul Yagmur Goren
AYArzu Yucel
Arzu Yucel
Sait Cemil SofuogluSait Cemil Sofuoglu
Sait Cemil Sofuoglu
ASAysun Sofuoglu
Aysun Sofuoglu

23 August 2016 in Environmental Science and Pollution Research
Verified
Journal Article
Open access
PDF file
TUTugba Ugranli
Tugba Ugranli
EGElif Gungormus
Elif Gungormus
PKPınar Kavcar
Pınar Kavcar
EDEylem Demircioglu
Eylem Demircioglu
MOMustafa Odabasi
Mustafa Odabasi
ASAysun Sofuoglu
Aysun Sofuoglu
Semi-volatile organic compounds were monitored over a whole year, by collection of gas and particle phases every sixth day at a suburban site in Izmir, Turkey. Annual mean concentrations of 32 polychlorinated biphenyls (∑32PCBs) and 14 polycyclic aromatic hydrocarbons (∑14PAHs) were 348 pg/m3 and 36 ng/m3, respectively, while it was 273 pg/m3 for endosulfan, the dominant compound among 23 organochlorine pesticides (OCPs). Monte Carlo simulation was applied to the USEPA exposure-risk models for the estimation of the population exposure and carcinogenic risk probability distributions for heating and non-heating periods. The estimated population risks associated with dermal contact and inhalation routes to ∑32PCBs, ∑14PAHs, and some of the targeted OCPs (α-hexachlorocyclohexane (α-HCH), β-hexachlorocyclohexane (β-HCH), heptachlor, heptachlor epoxide, α-chlordane (α-CHL), γ-chlordane (γ-CHL), and p,p′-dichlorodiphenyltrichloroethane (p,p′-DDT)) were in the ranges of 1.86 × 10−16–7.29 × 10−9 and 1.38 × 10−10–4.07 × 10−6, respectively. The inhalation 95th percentile risks for ∑32PCBs, ∑14PAHs, and OCPs were about 6, 3, and 4–7 orders of magnitude higher than those of dermal route, respectively. The 95th percentile inhalation risk for ∑32PCBs and OCPs in the non-heating period were 1.8- and 1.2–4.6 folds higher than in the heating period, respectively. In contrast, the 95th percentile risk levels for ∑14PAHs in the heating period were 4.3 times greater than that of non-heating period for inhalation, respectively. While risk levels associated with exposure to PCBs and OCPs did not exceed the acceptable level of 1 × 10−6, it was exceeded for 47 % of the population associated with inhalation of PAHs with a maximum value of about 4 × 10−6.

1 August 2020 in Science of The Total Environment
Verified
Journal Article
Closed access
EBEsin Balci
Esin Balci
MGMesut Genisoglu
Mesut Genisoglu
Sait Cemil SofuogluSait Cemil Sofuoglu
Sait Cemil Sofuoglu
ASAysun Sofuoglu
Aysun Sofuoglu