While self-healing concrete shows promise for infrastructure repair, its effectiveness is significantly compromised in low-temperature environments because of slowed reaction kinetics and the embrittlement of capsule shells. To address this limitation, novel composite microcapsules featuring an ethyl cellulose shell and a dual-core comprising expansive cement and epoxy resin were developed. These microcapsules were fabricated using a physical spheronization-coating method and subsequently incorporated into cement mortar. Response surface methodology was employed to identify the optimal system, which balances self-healing performance with the retention of mechanical properties: a microcapsule content of 3% (by mass of cement) and a particle size range of 1.4 to 1.7 mm. Under conditions of −20 °C, the optimal formulation achieved a crack surface healing ratio of up to 44.1% and a compressive strength recovery of up to 6.0%. Microstructural and spectroscopic analyses (SEM-EDS, XRD) revealed a synergistic healing mechanism. This mechanism involves the formation of calcium carbonate, C–S–H gel, and anorthite, all cohesively bonded within a polymerized epoxy network. This work establishes a functional material strategy for enabling autonomous crack repair in concrete structures subjected to cold climates. In such environments, even marginal strength recovery, when coupled with effective crack sealing, can significantly enhance structural durability.
The development of all-concrete liquefied natural gas (LNG) storage tanks is hindered by the susceptibility of conventional concrete to ultra-low temperature (ULT) cycling down to −70 °C. While redispersible polymer powder (RPP) and polypropylene (PP) fibers individually enhance performance, their combined effect in various mineral admixture systems remains unclear. This study investigates the synergy and selective compatibility in hybrid-modified concrete containing fly ash (FA), silica fume (SF), or slag (SG). Comprehensive assessments after 50 ULT cycles reveal that the efficacy of hybrid modification is intrinsically governed by the mineral admixture. Among all systems, the silica fume-based hybrid system (EPSF) exhibits the highest residual compressive strength (57.5 MPa), the lowest strength loss (6.7%), and the most balanced durability. Microstructural analysis reveals that this synergy arises from a dense matrix, continuous polymer network, and effective fiber bridging—achieved only when the mineral admixture enables uniform RPP distribution. In contrast, the FA system exhibits a strength–durability trade-off, with RPP localized at interfaces, while the SG system shows a polymer-activated hydration mechanism. Microstructural and nano-mechanical analyses confirm that RPP acts as a pore filler in cement, an interfacial modifier in FA, a cohesive network former in SF, and a hydration activator in SG. This work establishes that superior ULT resilience requires not merely additive modifications but a matrix-enabled synergy, providing a scientific basis for the rational design of cryogenic concrete.