Cellulose acetate is one of the most important cellulose derivatives. The use of ionic liquids in cellulose processing was recently found to act both as a solvent and also as a reagent. A recent study showed that cellulose dissolution in the ionic liquid 1-ethyl-3-methylimidazoliumacetate (EMIMAc) mixed with dichloromethane (DCM) resulted in controlled homogenous cellulose acetylation; yielding water-soluble cellulose acetate (WSCA). This research investigated the properties of cellulose acetate prepared in this manner, in an aqueous solution. The results revealed that WSCA fully dissolves in water, with no significant sign of molecular aggregation. Its conformation in aqueous solution exhibited a very large persistence length, estimated as over 10 nm. The WSCA exhibited surface activity, significantly reducing the surface tension of water. Because of the molecular dissolution of WSCA in water, augmented by its amphiphilicity, aqueous solutions of WSCA exhibited an overwhelmingly high rate of enzymatic hydrolysis.
Lipase-catalyzed transesterification is prevalent in industrial production and is an effective alternative to chemical catalysis. However, due to lipases’ unique structure, the reaction requires a biphasic system, which suffers from a low reaction efficiency caused by a limited interfacial area. The use of emulsion particles was found to be an effective way to increase the surface area and activity. This research focuses on cellulose as a natural surfactant for oil-in-water emulsions and evaluates the ability of lipase, introduced into the emulsion’s aqueous phase, to integrate with the emulsion microparticles and catalyze the transesterification reaction of high molecular weight esters dissolved in the particles’ cores. Cellulose-coated emulsion particles’ morphology was investigated by light, fluorescence and cryogenic scanning electron microscopy, which reveal the complex emulsion structure. Lipase activity was evaluated by measuring the hydrolysis of emulsified p-nitrophenyl dodecanoate and by the transesterification of emulsified methyl laurate and oleyl alcohol dissolved in decane. Both experiments demonstrated that lipase introduced in the aqueous medium can penetrate the emulsion particles, localize at the inner oil core interface and perform effective catalysis. Furthermore, in this system, lipase successfully catalyzed a transesterification reaction rather than hydrolysis, despite the dominant presence of water.
Environmental and economic concerns due to the increasing use of fossil-based chemicals, especially fuel, may be alleviated by production of renewable fuels based on plant biomass, in particular, waste. Multistep cascades of enzymatic reactions are being increasingly sought to enhance the effectiveness of sustainable, environment-friendly processes. The biochemical transformation of lignocellulosic biomass and oils into fatty acid esters (“biodiesel”) involves biomass pretreatment, followed by polysaccharide hydrolysis and sugar fermentation to alcohol, either sequentially or simultaneously. Subsequent trans-esterification with waste or non-food-based oils is usually carried out in an organic solvent. Biocatalysis in aqueous emulsion offers significant advantages. This study presents a novel “one-pot” emulsion-based process for transforming unmodified cellulose and castor oil into biodiesel via hybridized yeasts with cellulose-coated micro-particles incorporating cellulolytic enzymes and lipases. The resultant consolidated bioprocess of saccharification, fermentation, and transesterification (cSFT) promotes effective substrate channeling and can potentially serve as a model for emulsion-based “one-pot” transformations of cellulose into valuable chemicals.
Triacetin (TA) is a solvent commonly used in pharmaceutical and food applications, and as a plasticizer in bioplastics such as poly(lactic acid) (PLA) and cellulose acetate (CA). L-lactide is the monomer used in the ring-opening polymerization of PLA. The structure of TA emulsions stabilized by a cellulose hydrogel (CH) was imaged in this study. The emulsions were prepared by mechanical homogenization or a two-step process with subsequent high-pressure homogenization (HPH). The two-step process yielded smaller TA droplets and a more homogeneous CH dispersion. The images demonstrate that emulsion stabilization is due to CH particles adsorbed at the TA–water interface. The ester hydrolysis of TA and a lactide/TA solution by two industrially important lipases, from Candida rugosa (CRL) and Burkholderia cepacia (BCL), was investigated, assessing the effect of CH as an emulsion stabilizer. Mechanically homogenized TA emulsions were effectively hydrolyzed. Lactide was found to inhibit the enzymatic hydrolysis of TA. This inhibition was mitigated by CH for CRL-catalyzed hydrolysis but not for BCL catalysis. These results indicate a synergistic effect of CH stabilization on the interfacial activation of CRL. Thise effect may also be relevant for the biodegradation of bio-derived plastics and their fibrous cellulose composites.