Due to the enhanced demand for numerous electrical energy storage applications, including applications at elevated temperatures, dielectric capacitors with optimized energy storage properties have attracted extensive attention. In this study, a series of lead-free strontium bismuth titanate based relaxor ferroelectric ceramics have been successfully synthesized by high temperature solid-state reaction. The ultrahigh recoverable energy storage density of 4.2 J/cm3 under 380 kV/cm, with the high efficiency of 88%, was obtained in the sample with x = 0.06. Of particular importance is that this ceramic composition exhibits excellent energy storage performance over a wide work temperature up to 150 °C, with strong fatigue endurance and fast discharge speed. All these merits demonstrate the studied ceramic system is a potential candidate for high-temperature capacitors as energy storage devices.
Herein, the (1 − x)(Sr0.7Bi0.2)TiO3–xBi(Mg0.5Hf0.5)O3 (SBT–100xBMH, x = 0.04–0.10) relaxor ferroelectric ceramics are fabricated via the high‐temperature solid‐state reaction method. Dielectric and ferroelectric measurements reveal a typical relaxor characteristic with diffused and frequency‐dependent dielectric peaks. The characteristic Weibull breakdown strength (BDS) of 470 kV cm−1 with satisfied reliability is obtained by DC breakdown measurement. A maximum recoverable energy density of 3.5 J cm−3 with the corresponding energy efficiency of 92% is simultaneously achieved at 380 kV cm−1. The recoverable energy density exhibits minor degradations from ambient temperature to 200 °C with variation below 20%, whereas the energy efficiency is maintained above 90%. In addition, the SBT–8BMH ceramic possesses a fast charge–discharge speed with high discharge power density of 2.9 MW cm−3. All the results make this lead‐free relaxor ferroelectric ceramic a promising potential candidate for high‐temperature energy‐storage capacitor applications.