The optimal management strategy of patients with concomitant anterior communicating artery aneurysm (ACoAA) and internal carotid artery (ICA) stenosis is unclear. This study aims to evaluate the impacts of unilateral ICA revascularization on hemodynamics factors associated with rupture in an ACoAA. In the present study, a multiscale computational model of ACoAA was developed by coupling zero-dimensional (0D) models of the cerebral vascular system with a three-dimensional (3D) patient-specific ACoAA model. Distributions of flow patterns, wall shear stress (WSS), relative residence time (RRT) and oscillating shear index (OSI) in the ACoAA under left ICA revascularization procedure were quantitatively assessed by using transient computational fluid dynamics (CFD) simulations. Our results showed that the revascularization procedures significantly changed the hemodynamic environments in the ACoAA. The flow disturbance in the ACoAA was enhanced by the resumed flow from the affected side. In addition, higher OSI (0.057 vs. 0.02), prolonged RRT (1.14 vs. 0.39) and larger low WSS area (66 vs. 50 mm2) in ACoAA were found in the non-stenotic case. These acute changes in hemodynamics after revascularization may elevate the rupture risk of ACoAA. The preliminary results validated the feasibility of predicting aneurismal hemodynamics characteristics in revascularization procedures by using multiscale CFD simulations, which would benefit the management of this group of patients.
As the only arterial structure of which two main arteries merged into one, the vertebro-basilar (VA-BA) system is one of the favorite sites of cerebral atherosclerotic plaques. The aim of this study was to investigate the detailed hemodynamics characteristics in the VA-BA system. A scale-up subject-specific flow phantom of VA-BA system was fabricated based on the computed tomography angiography (CTA) scanning images of a healthy adult. Flow fields in eight axial planes and six radial planes were measured and analyzed by using particle image velocimetry (PIV) under steady flow conditions of $${Re}=300$$ , $${Re}=500$$ . A water–glycerin mixture was used as the working fluid. The flow in the current model exhibited highly three-dimensional characteristics. The confluence of VAs flow formed bimodal velocity distribution near the confluence apex. Due to the asymmetrical structural configuration, the bimodal velocity profile skewed towards left, and sharper peaks were observed under higher Reynolds condition. Secondary flow characterized by two vortices formed in the radial planes where 10 mm downstream the confluence apex and persists along the BA under both Reynolds numbers. The strength of secondary flow under $${Re}=500$$ is around 8% higher than that under $${Re}=300$$ , and decayed nonlinearly along the flow direction. In addition, a low momentum recirculation region induced by boundary layer separation was observed near the confluence apex. The wall shear stress (WSS) in the recirculation area was found to be lower than 0.4 Pa. This region coincides well with the preferential site of vascular lesions in the VA-BA system. This preliminary study verified that the subject-specific in-vitro experiment is capable of reflecting the detailed flow features in the VA-BA system. The findings from this study may help to expand the understanding of the hemodynamics in the VA-BA system, and further clarifying the mechanism that underlying the localization of vascular lesions.