Gold-black coatings formed by evaporation and subsequent sublimation of pure gold in an inert low-pressure atmosphere are used to enhance absorption of thermal radiation. Previous attempts to predict the spectral absorptivity of gold-black coatings have typically assumed a granular continuum with effective bulk optical properties. In the current effort the principles of diffusion-limited aggregation (DLA) are applied to mimic the observed microstructure of actual gold-black layers consisting of a random fractal distribution of dendritic gold filaments that are postulated to behave as dipole antennas. Absorption of incident electromagnetic radiation by individual filaments is predicted using a unique time-dependent lossy antenna model drawing on the Drude–Sommerfeld free-electron theory. Single-filament spectral absorptivities are combined based on the DLA microstructure model to predict the spectral and, for the first time, the directional absorptivity of the gold-black layer. Results for normal spectral absorptivity are shown to be in good agreement with measurements reported in the literature.
Integrating spheres play a central role in radiometric instrument calibration, surface optical property measurement, and radiant source characterization. Our work involves a simulation, based on the Monte Carlo ray-trace (MCRT) of bidirectional reflections within a practical integrating sphere pierced with two viewing ports. We used data from the literature to create an empirical model for the bidirectional reflection distribution function (BRF) of Spectralon suitable for use in the MCRT environment. The ratio of power escaping through the two openings is shown to vary linearly with wall absorptivity for both diffuse and bidirectional reflections. The sensitivity of this ratio to absorptivity is shown to be less when reflections are weakly bidirectional.
11 April 2023 in ASME Journal of Heat and Mass Transfer
A generic Monte Carlo ray-trace (MCRT) engine for computing radiation distribution factors (RDFs), working in tandem with an efficient finite volume formulation based on discrete Green’s functions (DGFs), has been used to solve a massive (2636 nodes) coupled radiation/conduction problem. Distribution factors computed using the MCRT method are known to produce unconditionally stable solutions to pure radiation problems even though the RDFs themselves do not conform exactly to the reciprocity principle. However, when these same RFDs are introduced into time-dependent finite volume conduction formulations based on DGFs, the resulting model is found to be fundamentally unstable due to inherent violations of the second law of thermodynamics. A novel approach to addressing this instability is presented and demonstrated for the case of a telescope typical of those employed to monitor the planetary energy budget from low Earth orbit.