Two azo dyes, acid red 1 (AR1) and acid red 18 (AR18), were used alone or in combination with sodium dodecyl sulfate (SDS) for the electropolymerization of a pyrrole monomer. Polypyrrole (PPy) showed higher redox capacity when SDS and AR18 were used simultaneously as dopant agents (PPy/AR18-SDS) than when the conducting polymer was produced in the presence of SDS, AR18, AR1, or an AR1/SDS mixture. Moreover, PPy/AR18-SDS is a self-stabilizing material that exhibits increasing electrochemical activity with the number of oxidation–reduction cycles. A mechanism supported by scanning electron microscopy and X-ray diffraction structural observations was proposed to explain the synergy between the SDS surfactant and the AR18 dye. On the other hand, the Bordeaux red color of PPy/AR18-SDS, which exhibits an optical band gap of 1.9 eV, rapidly changed to orange-yellow and blue colors when films were reduced and oxidized, respectively, by applying linear or step potential ramps. Overall, the results indicate that the synergistic utilization of AR18 and SDS as dopant agents in the same polymerization reaction is a very successful and advantageous strategy for the preparation of PPy films with cutting-edge electrochemical and electrochromic properties.
The mutual effects of nano-TiO2 and alkaline hydrolysis on the morphology, chemical structure, water absorption, and the dyeing behavior of poly(ethylene terephthalate) nanofibers were investigated via employing scanning electron microscope, Fourier Transform Infra Red Spectroscopy (FTIR) and X-ray diffraction, and measuring water contact angle, 3M repellency, and dye absorption. A direct relation between the alkaline hydrolysis rate and nanofibers hydrophilicity was observed, while the addition of the nano-TiO2 led to more hydrophobicity. However, the alkaline hydrolysis had the prominent effect. FTIR spectra illustrated no chemical interaction between the nanoparticles and nanofibers. It was also shown that the dye absorption at dyeing equilibrium and the rate of dyeing were increased by the presence of the nano-TiO2 and these effects were intensified by the alkaline hydrolysis. These observations were related to the reduction in the nanofibers diameter and the increase in the surface roughness, as evidenced in the scanning electron microscope, and the increase in the amorphous regions of the nanofibers, as shown by the X-ray diffraction diffractograms.