The transient and steady pervaporation of 1-butanol–water mixtures through a poly[1-(trimethylsilyl)-1-propyne] (PTMSP) membrane was studied to observe and elucidate the diffusion phenomena in this high-performing organophilic glassy polymer. Pervaporation was studied in a continuous sequence of experiments under conditions appropriate for the separation of bio-butanol from fermentation broths: feed concentrations of 1.5, 3.0 and 4.5 w/w % of 1-butanol in nutrient-containing (yeast extract) water, temperatures of 37, 50 and 63 °C, and a time period of 80 days. In addition, concentration polarization was assessed. As expected, the total flux and individual component permeabilities declined discernibly over the study period, while the separation factor (average β = 82) and selectivity towards 1-butanol (average α = 2.6) remained practically independent of the process conditions tested. Based on measurements of pervaporation transients, for which a new apparatus and model were developed, we found that the diffusivity of 1-butanol in PTMSP decreased over time due to aging and was comparable to that observed using microgravimetry in pure vapor in 1-butanol. Hence, despite the gradual loss of free volume of the aging polymer, the PTMSP membrane showed high and practically independent selectivity towards 1-butanol. Additionally, a new technique for the measurement and evaluation of pervaporation transients using Fourier transform infrared spectroscopy (FTIR) analysis of permeate was proposed and validated.
3 April 2017 in Regenerative Engineering and Translational Medicine
The large-scale implementation of 2D material-based membranes is hindered by mechanical stability and mass transport control challenges. This work describes the fabrication, characterisation, and testing of self-standing graphene oxide (GO) membranes cross-linked with oxides such as Fe2O3, Al2O3, CaSO4, Nb2O5, and a carbide, SiC. These cross-linking agents enhance the mechanical stability of the membranes and modulate their mass transport properties. The membranes were prepared by casting aqueous suspensions of GO and SiC or oxide powders onto substrates, followed by drying and detachment to yield self-standing films. This method enabled precise control over membrane thickness and the formation of laminated microstructures with interlayer spacings ranging from 0.8 to 1.2 nm. The resulting self-standing membranes, with areas between 0.002 m2 and 0.090 m2 and thicknesses from 0.6 μm to 20 μm, exhibit excellent flexibility and retain their chemical and physical integrity during prolonged testing in direct contact with ethanol/water and methanol/water mixtures in both liquid and vapour phases, with stability demonstrated over 24 h and up to three months. Gas permeation and chemical characterisation tests evidence their suitability for gas separation applications. The interactions promoted by the oxides and carbide with the functional groups of GO confer great stability and unique mass transport properties—the Nb2O5 cross-linked membranes present distinct performance characteristics—creating the potential for scalable advancements in cross-linked 2D material membranes for separation technologies.
The present study focused on the production of L-asparaginase using Solid State Fermentation (SSF) by Myroides gitamensis. Initially, five significant parameters (Carbon source; Nitrogen source, temperature, pH and incubation period) were identified that affect the production process of L-asparaginase using Classical One Factor at a Time (OFAT) optimization. An optimized L-asparaginase specific activity obtained by OFAT was recorded as 85.7 IU. Central Composite Design (CCD) was also employed successively to optimize the multiple parameters at a time and their results were compared. Maximum L-asparaginase enzyme specific activity obtained by CCD method was 295.6 IU under the hold values of carbon source (wheat bran) 12 g/L, nitrogen source (yeast extract) 7 g/L, temperature 37°C, pH=7.5 and incubation period 47 hr. Upon validation, the obtained results proved that there was a good relation existing between the experimental and the predicted model (p<0.05). L-asparaginase activity was enhanced in statistical method up to 3.4 folds compared to that of classical method. Utilization of wheat bran as a low cost carbon source in SSF for the production of L-asparaginase enzyme makes the process economical and in turn reduces the environmental pollution by biotransformation to commercially useful bio product.