Rutting is a major distress occurring in the service life of the asphalt pavement, especially in hot weather areas. A laboratory‐produced specimen is widely used for rutting performance evaluation which may not be completely represented by the field situation. The objective of this study is to evaluate the rutting performance of field specimens from the Chongqing highway by utilizing the Hamburg wheel‐tracking test (HWTT) and dynamic modulus test. Different test conditions were conducted on the HWTT by investigation of the actual local weather condition. The results showed that rutting depth was different under different test conditions, and 10000 loading cycles were recommended as the maximum loading cycles. Particularly, several factors that influence the rutting depth were investigated, and the specimen height of 6 cm is more appropriate for the HWTT. Additionally, different test conditions were proposed as the HWTT test condition for different asphalt concrete (AC) layers in the Chongqing area. Rutting contribution of each AC layer to the pavement structure was analyzed. Moreover, the dynamic modulus at 54.4°C, 5 Hz and 54.4°C, 1 Hz could effectively represent the rutting performance of the asphalt mixture, and the dynamic modulus test is recommended for the rutting performance evaluation of the full‐thickness AC layer.
30 October 2022 in Construction and Building Materials
The aim of this study is to enhance the carbonation resistance of fully recycled aggregate concrete through diverse measures in an effort to enhance solid waste disposal, reduce the consumption of natural aggregates, and broaden the utilization of recycled aggregate concrete. Six sets of fully recycled aggregate concrete specimens were prepared and subjected to rapid carbonation tests. Carbonation depth and compressive strength measurements were taken at different ages (3, 7, 14, and 28 days). Subsequent calculations and analyses were conducted on both parameters for each set of specimens. Results indicate that the incorporation of microspheres and high-toughness polypropylene fibers (HTPP) substantially improves the carbonation resistance of fully recycled aggregate concrete, leading to a 48% reduction in carbonation depth by the 28th day. Furthermore, a relative compressive strength model for fully recycled aggregate concrete post-carbonation was established based on the strength data of each specimen group. This model accurately depicts the growth pattern of compressive strength after carbonation. Additionally, a carbonation depth prediction model was developed through fitting analysis of carbonation depth data, effectively foreseeing the depth of carbonation in fully recycled aggregate concrete. Based on the carbonation depth, the carbonation life of fully recycled aggregate concrete was predicted. The carbonation life of recycled aggregate concrete with added microspheres and HTPP fibers can be increased by up to 278%. Finally, scanning electron microscopy (SEM) was employed to examine the microstructure of fully recycled aggregate concrete, revealing the mechanisms by which various methods enhance its carbonation resistance. The carbonation resistance improvement technology of fully recycled aggregate concrete is selected through this study characteristics such as simplicity, convenience, and cost-effectiveness, which are crucial for the widespread application of recycled aggregate concrete in building structures.
28 July 2019 in Advances in Materials Science and Engineering
Dynamic modulus is a key parameter in the pavement structure design and analysis. A haversine loading waveform is the most widely recommended waveform in the laboratory to obtain the dynamic modulus of asphalt mixtures by test protocols, which may not completely represent all field loading conditions. The aim of this study is to investigate the suitable vertical compressive stress pulse waveforms at different depths under different pavement structures and to obtain the best fitting waveforms by using the least squares method. Specifically, the vertical compressive stress of different pavement structures was calculated by utilizing a three-dimensional finite element program incorporating with the measured wheel loads. The results revealed that the vertical stress pulse waveforms at different depths in asphalt layer were different within different pavement structure combinations. Generally, the square waveform fitted the vertical stress pulse waveform better for the shallow depth of the surface layer. The haversine waveform became more suitable while the depth increased. The bell waveform was better when the depth went deeper (i.e., 10 cm). In addition, the method of choosing waveforms at different depths of different pavement structures was provided, and the equation of calculating wavelength was recommended. Moreover, dynamic modulus under different loading waveforms were analysed through laboratory test, and the process for obtaining dynamic modulus of asphalt layer in any depth was presented.