Developing an eco-friendly, flexible and recyclable micro-structured dry electrode for sustainable life is essential. In this work, we have developed irregular, micro-structured sandpaper coated with graphite powder as an electrode for developing a simple, low-cost, contact-separation mode graphite-coated sandpaper-based triboelectric nanogenerator (GS-TENG) as a self-powered device and biomechanical sensor. The as-fabricated GS-TENG is a dielectric-conductor model. It is made up of a bottom layer with polytetrafluoroethylene (PTFE) as a triboelectric layer, which is attached onto a graphite-coated sandpaper-based electrode and a top layer with aluminum as another triboelectric layer as well as an electrode. The forward and reverse open-circuit voltages reach upto ~33.8 V and ~36.62 V respectively, and the forward and reverse short-circuit currents are ~2.16 µA and ~2.17µA, respectively. The output generated by GS-TENG can power 120 blue light-emitting diodes connected in series, liquid crystal display and can charge commercial capacitors along with the rectifier circuit. The capacitor of 22 µF is charged upto 5 V and is sufficient to drive digital watch as wearable electronics. Moreover, the device can track signals generated by human motion, hence it scavenges biomechanical energy. Thus, GS-TENG facilitates large-scale fabrication and has potential for future applications in wearable and portable devices.

Triboelectric nanogenerators (TENGs) have emerged as a promising alternative for powering small-scale electronics without relying on traditional power sources, and play an important role in the development of the internet of things (IoTs). Herein, a low-cost, flexible polyvinyl alcohol (PVA)-based TENG (PVA-TENG) is reported to harvest low-frequency mechanical vibrations and convert them into electricity. PVA thin film is prepared by a simple solution casting technique and utilized to serve as the tribopositive material, polypropylene film as tribonegative, and aluminum foil as electrodes of the device. The dielectric-dielectric model is implemented with an arch structure for the effective working of the PVA-TENG. The device showed promising electrical output by generating significant open-circuit voltage, short-circuit current, and power . Also, PVA-TENG is subjected to a stability test by operating the device continuously for 5000 cycles. The result shows that, the device is mechanically durable and electrically stable. Further, the as-fabricated PVA-TENG is demonstrated to show feasible applications, such as charging two commercial capacitors with capacitances 1.1 and 4.7 μF and powering green light-emitting diodes. The stored energy in the 4.7 μF capacitor is utilized to power a digital watch and humidity and temperature sensor without the aid of an external battery. Thus, the PVA-TENG facilitates ease of fabrication, robustness, and cost-effective strategy in the field of energy harvesting for powering lower-grid electronics by demonstrating their potential as a sustainable energy source.