In this study, the ZnO-TiO2 nanocomposite was synthesised by a sol-gel method. Using the Taguchi experimental design method, the three parameters of material composition, calcination temperature and calcination time were optimised with respect to the photocatalytic activity of the prepared materials under visible light. Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and N2 adsorption–desorption measurement were performed to characterise the synthesised powders. The sample with the composition of 25 wt.% ZnO followed by calcination at 450°C for 1 h presented the highest photocatalytic efficiency (63%). Among the three synthesis parameters, the statistical results recognised calcination temperature as the most effective factor on the photocatalytic activity of the ZnO-TiO2 nanocomposite. The optical absorption edge of the TiO2-ZnO nanocomposite was detected in the range of visible light and the band gap of the optimal sample was found to be 2.7 eV that is lower than that of P25.
29 January 2016 in Optical and Quantum Electronics
In this paper, the influence of calcination temperature and time has been investigated on the structural, morphological, optical, and photo-catalytic properties of Sn/Ce co-doped TiO2 nano-powders prepared via sol–gel process. They were calcined at the temperatures in the range of 475–975 °C for 1 and 2 h. The photocatalytic ability of TiO2 powders was evaluated by means of methylene blue degradation experiments conducted under the irradiation of simulated solar light. The X-ray diffraction results showed that the tensile strain in the host lattice was present. The comparison with undoped and Sn or Ce-doped TiO2, co-doped TiO2 shows an obviously higher catalytic activity under visible light irradiation. The absorbance spectrum of Ce and Sn co-doped TiO2 exhibited significant red-shift to visible region. The red-shift is caused by the appearance of a new electronic state in the middle of the TiO2 band-gap. FESEM images show the formation of doped TiO2 nanoparticles with small size in structure and spherical in shape. The FTIR spectra exhibited peaks corresponding to the anatase and rutile structure phases of TiO2.
16 October 2014 in Optical and Quantum Electronics