In view of their immensely intriguing properties, two-dimensional (2D) materials are being intensely researched in search of novel phenomena and diverse application interests; however, studies on the realization of 2D/2D nanocomposites in the application-worthy thin-film platform are rare. Here we have grown -hexagonal boron nitride (hBN) 2D/2D composite thin films on different substrates by the pulsed laser deposition technique and made comparative studies with the pristine and hBN films. The Raman and x-ray photoelectron spectroscopy techniques as well as high-resolution transmission electron microscopy confirm the concomitant presence of both the 1T (conducting) and 2H (semiconducting) polymorphs of in the composite film. Interestingly, a peculiar reentrant semiconductor-metal-insulator transition is seen in the 2D/2D composite film which is absent in the film, and it correlates well with the signatures of phonon softening seen in temperature-dependent Raman spectroscopy. Furthermore, electrostatic force microscopy reveals the presence of three distinct regions (metallic, semiconducting, and insulating) in the composite film with differing contact potentials and enhanced propensity for charge transfer with respect to pristine . A triboelectric nanogenerator device containing biphasic composite film as an electron acceptor exhibits more than twofold (sixfold) enhancement in peak-to-peak output voltage as compared to the pristine (hBN) film. These observations bring out the potential of 2D/2D nanocomposite thin films for unfolding emergent phenomena and technological applications.
12 July 2019 in Journal of Physics D: Applied Physics
Research on electromagnetic interference (EMI) shielding materials has become very important as one looks for polymer composites as EMI shielding paints and coatings. EMI Shielding is mainly dependent on absorption and reflection losses, which in turn depend on conductivity, permittivity and permeability of the material. In the present work, we have tried to use the properties of graphene to improve EMI shielding and absorbing properties of the polymer composite. The work is focussed on two aspects of the materials; firstly, to developed an EMI shielding paint which can be used as coating and secondly, development of such paint which has absorption as the dominant mechanism of shielding. Reduced graphene oxide(rGO) has been conjugated with ferromagnetic nanostructures. Absorption of up to ∼12 dB for composite of rGO-Fe 3 O 4 and ∼18 dB for the composite of rGO-Ni was observed, which is more than 99% of the total radiation and hence, can be useful for commercial applications.
Electromagnetic interference (EMI) shielding inks are generally conducting inks and therefore, are mostly reflection based. EMI shielding based on reflection are sometimes not suitable for certain applications apart from the fact that they themselves act as secondary source of EM waves. Here, we develop reduced graphene oxide (rGO)- zinc nickel ferrite (ZNF) and rGO-manganese (Mn)-doped zinc nickel ferrite inks for EM absorption in X-band, which have been tested in liquid state, coatings, and as printed meta-structures demonstrating versatile use of the inks. As a coating, the average EMI shielding of more than 30 dB is achieved in the 8 to 12 GHz range. The absorption properties of the rGO based ink can be increased from 50% to more than 80% by addition of a ferrite composite and can further be tuned by Mn doping. The dielectric measurement studies reveal that addition of Mn creates sites for interfacial polarization. The interfaces between polymer matrix, rGO, ZNF, and Mn contribute to conductivity, dipole and interfacial polarization losses, thereby augmenting absorption dominated EMI shielding. Cole-cole plot for the inks also indicates multiple relaxation processes confirming the role interfaces in absorption properties of the composite ink. Graphical abstract
1 May 2020 in Journal of Nanoscience and Nanotechnology
The magnetic properties of the metal nanoparticles (NPs) can play remarkable role in electromagnetic interference shielding (EMI Shielding) of many defence and commercial electronic devices. In the present work, coconut oil and PVA capped magnetic cobalt/cobalt oxide nanoparticles (Co/Co3O4 NPs) were synthesized by chemical reduction method and impregnated in polymer matrix to verify their EMI shielding behaviour. The coconut oil capped Co/Co3O4 NPs with presence of hcp and fcc phases were prepared in the size domain of 7–10 nm and the effect of surfactant (the oil) on size and oxidation state was studied by varying the ratios. The shielding efficiencies of Co/Co3O4 NPs PVA nanocomposites were analysed by using vector network analyser (VNA) in X- and Ku-band ranging from 8 GHz–18 GHz. The VNA results showed increased shielding efficiency with increasing concentration of NPs.